2 HOURS WORK turns into 2 DAYS

[@diddywright6165]

Great content mate “can you just”!!!! It never ceases to amaze me how your tools double up😂👍🏻

[@PlumbLikeTom]

I love my hammer spanner, Thanks for the support as always mate

[@lazylad8544]

Brilliant job again tom. A good plumber is worth his weight in gold times 2. 👍👍👍

[@PlumbLikeTom]

Thanks for the support as always mate

[@TheBigUnit88]

The only thing you don’t do is a bad job Tom. Great video 👍🏼

[@PlumbLikeTom]

Thanks for the support as always mate, have a great weekend

[@StevenMurray-mt7om]

Hi Tom.. Another tidy job…look forward to the boiler installation. 👍

[@PlumbLikeTom]

Thanks for the support as always Steven

[@mastercraft5798]

Well done Tom, the job's looking good.

[@PlumbLikeTom]

Thanks for watching mate

[@chrisholt2474]

Hi Tom, Another busy and stressful day for you there mate. I look forward to the boiler installation film. Have a great weekend and as always, take care Tom. 👍👍👍

[@PlumbLikeTom]

Thanks for the support as always Chris, hope you have a great weekend

[@Barry-m2t]

Thank you for the video Tom, enjoy your weekend mate!!

[@PlumbLikeTom]

Thanks for the support as always Barry, have a great weekend

[@sipa436]

Thanks for the post Tom 👍

[@PlumbLikeTom]

Thanks for the support as always mate 👍

[@JK-we1dr]

Appreciate the effort you make and the way you explain everything. Nice 👍

[@PlumbLikeTom]

Thanks for watching mate

[@pault3705]

Enjoyed that tom ...

[@PlumbLikeTom]

Thanks for watching Paul

[@garywhydell7688]

Great video Tom. Tales of the unexpected.

[@PlumbLikeTom]

Thanks for the support as always Gary

[@paulbrown1079]

Rock on Tommy great videos as always sunshine remember you can't be everywhere at once .

[@PlumbLikeTom]

Thanks for the support as always Paul, have a great weekend

[@piety23]

Love the content mate, look after yourself

[@PlumbLikeTom]

Thanks fort the support as always mate

[@chrisrixon1364]

Hi Tom , great video .

[@PlumbLikeTom]

Thanks for the support as always Chris

[@Tom_Plumb_PHS]

Cracking job as always Tom, loom forward to the next installment. I like Corefix plugs too they hold pretty much anything on block walls. 😊

[@PlumbLikeTom]

The core fixes are great, I used to hate hanging these on dot and dab, it makes life much easier, thanks for watching as always Tom

[@tonymurff5234]

Nice work as always Tom Great video Mate 😎👍🤜

[@PlumbLikeTom]

Thanks for the support as always Tony

[@SeanRidley-g7z]

Wear a mask Tom. I was an apprentice with my late father. He died of breathing related issues. He used to say you don't even think about breathing until you can't do it. He died at 70. Look after your health . Keep the great videos coming.

[@PlumbLikeTom]

Thanks for the support Sean, I really do need to wear one, my PPE wearing isn't always the best, there's a few things I should do to help look after myself

[@Tom_Plumb_PHS]

Definitely Sean we're all guilty of not wearing all the PPE we should, including me. The JSP fit check masks are good as you can check you've got a seal easily before you get stuck in.

[@b1h2u3p4]

Sometimes when your busy we ain't got time for gloves and mask just want to crack on with work.

[@SeanRidley-g7z]

@@b1h2u3p4 Ive been a plumber for 35 years. My point is make the time. We all think bad things happen to others. Over time all the times you can't be bothered adds up. All your hard work will be for nothing if your not well.

[@CEO786]

@seanridley-g7z to be honest your dad had a very good run if he made it to 70.

[@PovilasKuznecovas]

This is more of a demolition than plumming. A good man at work!

[@PlumbLikeTom]

Thanks for watching mate 👍

[@peterdawson5115]

Nice job Tom, you can never do enough as a plumber can you, peoples expectations are too much sometimes, you take care. 🚽👍

[@PlumbLikeTom]

Thanks for the support as always Peter

[@robertgirvan761]

Can you fix flow and return on those radiators either end>?Are the radiators labelled input/output. In which case you have connected at least one rad the wrong way round

[@PlumbLikeTom]

These are flow sensitive, some vertical rads you can spin round if you get it wrong without altering the pipes. The one in the video can't though due to the style of the rail. Some come with baffles to put in yourself, so you can select which end is the flow. Thanks for watching Robert

[@SouthWestWildernessScotland]

Good video Tom, I see some things never change, you start a job and things get added on.

[@PlumbLikeTom]

Thanks for the support as always mate, it keeps me busy 👍

[@gavinbiard3745]

Mate you do your absolute best as always Tom…. I wouldn’t be worrying about the plaster if I’d had that rad situation dropped on me. Great video as always pal.

[@PlumbLikeTom]

Thanks for the support as always Gavin

[@Questionablethings]

10/10 Tom, quality work as always, if you need an apprentice gizza shout !!!! ha ha ha

[@PlumbLikeTom]

Thanks for the support as always mate, have a great weekend

[@garylatto4191]

Nice work tom, love the new hammer 😊, have a good weekend tom 👍

[@PlumbLikeTom]

Thanks for the support as always Gary, have a great weekend

[@pb9926]

Good video Tom 👍😎

[@PlumbLikeTom]

Thanks for the support as always Pb, hope you have a great weekend

[@mickobyobrien2650]

Great video 👍,love the ratchet hammer knocking the wall plugs in,I use anything that heavy within reach too😂😂😂

[@PlumbLikeTom]

That's my new hammer spanner, thanks for watching as always mate 👍

[@Charles61284]

Definitely under pressure there Tom. Had every confidence in ya mate 👍

[@PlumbLikeTom]

Thanks for the support as always Charles, have a great weekend

[@riptiz]

lol. Never pans out how you think it will. I’m sure you’ll manage it Tom.

[@PlumbLikeTom]

Thanks for the support as always Dave, we always get there in the end

[@andygill1977]

Great stuff Tom hope yer voice gets better soon.

[@PlumbLikeTom]

Thanks for the support as always Andy

[@garethdavid7827]

Sounds like me when I rock up at jobs 😂. ' I've only allowed 2hrs ..... I'm gonna be here 2 days' . Its been every service this season . All dog's dinners 🤬.

[@PlumbLikeTom]

Thanks for the support as always Andrew, hope you have a great weekend

[@GlenMcgee-v9m]

Hi tom, love to watch your videos is there anything that phases you?. You always seem in complete control. Question. What do you use for making your videos? GoPro?

[@PlumbLikeTom]

Thanks for watching Glen, I do use a go pro, I was thinking about upgrading soon to get a smaller body worn camera to run along side my go pro footage.

[@TheSparkysdog]

Have you had that stillson hammer long, looks a proper handy tool 😂 Great video Tom 👍

[@PlumbLikeTom]

I've had it a little while, I bought it at a sale. I think it was date stamped 1912 so it's just over a 100 years old. I quite like the old tools, thanks for watching

[@tedwilliams8766]

love your flux brush!! nothing wrong with customers adding on work. its a good problem to have. always a good practice to get things in writing that way everyone is covered. tom, would you know how many btu's those rads put out with 3/4 or 19mm pipe? thanks.

[@PlumbLikeTom]

Thanks for watching Ted, a 15mm pipe will carry about 13000 btu's. The rads have been sized for a 50 degree flow temperature. I did do the heat loss calculation, but I would have to look back at my book to find out how many btu's the rad were

[@AndyRichards-z8e]

Hi Tom.didnt see you taking out gas meter or shimming it before soldering gas pipe

[@PlumbLikeTom]

I always remove the meter, I don't always show every part of the job. It is hard to film everything when I'm working, but I always carry out safe procedures even if I don't shown them everytime, thanks for watching

[@keithbrueton]

I love the hammer Tom not seen one in a long time Hahahahahahaahah

[@PlumbLikeTom]

Thanks for the support as always Keith, it seems a well made tool

[@TomChapman-wv9iq]

Better too much work than not enough ,lol

[@PlumbLikeTom]

Very true, thanks for watching as always Tom

[@AbCd-zp2vr]

Hello I am surprised to see welding pewter with butane/propane, here in france 90% of plumbers use oxy acetylen, what's your opinion about it?

[@lestertennysonsmith-xw2fm]

Quick question tom,can you use press fit on gas and great video by the way

[@PlumbLikeTom]

They do make press fittings, I was told they should be treated like compression joints and only used where accessible. I've seen loads of people using them underfloors though, thanks for watching as always mate

[@SuperWayneyb]

🤘😎🤘🫖☕️🍪🎥👍👍

[@PlumbLikeTom]

Thanks for the support as always Wayne, have a great weekend

[@lolMyke]

13:28 my ocd is driving me crazy

[@PlumbLikeTom]

Thanks for watching

[@lolMyke]

@ love the vids Tom keep up the great work

[@johnbevan2079]

Mask and safety glasses dust from breeze block not good

[@PlumbLikeTom]

You are right John, thanks for watching

[@scottmcmeeko9651]

Could be why loosing your voice inhailing all that dust blocking your lungs

[@PlumbLikeTom]

I don't think so, thanks for watching Scott

[@scottmcmeeko9651]

@@PlumbLikeTom no bother mate stay safe

[@johnridley1038]

Tom, Why do you always work in that mess!, Get shot of all that rubble before you start the "nice" work.

[@Ed.R]

I agree if I have the time I like to clean up the work area frequently. Helps me focus on what's important.