According to my last girlfriend it does! Bitch. Next time I'll get a 4 door. 👍
@zacharyfike10714 жыл бұрын
Perfect DD set up. Realistic build.
@TheVikingSailor4 жыл бұрын
Realistic for who? lol I can barely afford the payments on the cheapest JT I could find much less all the stuff in this video. I'll just have to deal with being high centered all the time. lol
@44664024 жыл бұрын
I like the height of that Gladiator lift. Really made it loo more stout.
@iamblaineful4 жыл бұрын
For 2020, Bronze is the new Black
@thatmand45424 жыл бұрын
i know this might be a dumb question to some of yall but does adding a truss void your warranty cause im planning to buy one for my dad and weld it in for him as a surprise since hes been talking about it,Also does puting coilovers on the front void your warranty on the gladiator since you have to cut out the stock shock mount,lastly (sorry i just need these questions answered) Does cutting off the sway bar disconnect mounts witch look like tusks void you warranty,Hopefully you can solve my answers cause im wanting to be sure what im gonna do before i do it
@fhunjunkie3 жыл бұрын
$1,300 lightbar? Jesus, must be super special. Pro Tip: always get the light bar BEFORE you get the lift. :-)
@Moab123 жыл бұрын
Nice build! But the part about dirt roads in West Texas putting a lot of stress on the axle, ha! - fellow Texan
@JT4BRE2 жыл бұрын
Hey you mentioned that the lift hand the control arm relocation brackets. But I noticed that you didn’t have them installed on the front lower control arms?
@nitroxide174 жыл бұрын
Nice build! Im not sure but Jeep says the mopar 2 inch lift can clear 37s with the JT rubicon. Also, I thought the OE axles can handle 37s if you dont wheel too hard.
@heavyhitta52 Жыл бұрын
Not a fan of the bronze wheels with red truck. Think Bronze looks bets with black or white
@dominicportillo14 жыл бұрын
Wad Up Bubba, I'm torn between the 4.5 & 6.5 Evo lift kit Overland stage 4 plus with drop brackets. I seen Mel's OG 40 do some impressive stuff with such a high lift. Gladiators have a long wheel base so the higher the better but I'm new to this and I asking the experts from people I trust for there knowledge an experience. My JTR will see NO overlanding loading down the bed with racks & tents unnecessary weight. I will be hitting trail and crawling so I might have to get a custom kit with spring rates that aren't so stiff but I don't know. What are your thoughts? I'm new to the Jeep scene so my skill level is beginner but I will be going balls deep experiencing a new way of life .
@Exodus4x44 жыл бұрын
Check out the EVO mfg Fusion 6.5” kit. Coil overs in the front and King shocks in the rear. A great setup and basically what we’ve been running for the past 7 months on ours.
@pwrofgrayskull4 жыл бұрын
Exodus Jeeps: what are the ACTUAL measured lift heights (front AND rear measured gains) on the 2.5, 4.5, and 6.5 Evo Gladiator lifts? Have you measured the gains? I’ve seen some interesting reports on the actual lift height when installed on some of these lifts so I wanted to check with you and get your take on it. Thanks.
@Exodus4x44 жыл бұрын
@pwrofgrayskull I have not. It’s looks to be right at 2.5” though and EVO has historically been one of the more accurate lifts in terms of advertised lift height.
@pwrofgrayskull4 жыл бұрын
Exodus Jeeps: cool, thank you. 2.5 on both the front and rear or less lift in the rear would you say? I’m using mine as both a Jeep off road and a truck (hauling and towing) depending on the day of the week so the front/rear heights are important for my application. Thanks. 👍✌️
@Exodus4x44 жыл бұрын
@pwrofgrayskull it really depends on the level of wheeling you want to do. Light trails then yeah 2.5” with 37’s is good. Rock crawling it then you’ll want D60’s, 40” tires, and a 6.5” lift. It’s really up to you to decide where you want that lift to be.
@joekennedy16184 жыл бұрын
How much for kit - tires & wheels
@davidefterfield87284 жыл бұрын
That is a hot truck
@markjohnson77123 жыл бұрын
How much to install that kit in your shop approximately? With the truss? Think it’ will still fit in a standard 80” garage with 37’s? Awesome build. Bronze definitely goes with red for some reason.
@Exodus4x43 жыл бұрын
Best to email us through our website for a quote.
@leavesthe99844 жыл бұрын
Can you do a video on the trusses and what will make the Dana 44 near bulletproof?
@iqcarlospinzon3 жыл бұрын
That's just crazy (the price)
@moonwalkerRIP4 жыл бұрын
FnA! Sweet build. Bronze wheels look badass too!
@RobertSmith-ti1ct3 жыл бұрын
This is like the dream build for my gladiator
@joshualuk3 жыл бұрын
Looks good and wheel color. Shocks are cool.
@SnCroadster3 жыл бұрын
Would the stock wheels with that tire work good with that kit? Just wondering about the possible backspace differences?
@Exodus4x43 жыл бұрын
Nope.
@jeeps22304 жыл бұрын
If i put a thrust with 40" tires will i be able to tow with no problem? Thanks
@Exodus4x44 жыл бұрын
A thrust?
@danbrown42054 жыл бұрын
Did you have to change the front drive shaft to accommodate the added down travel? Thanks and it looks great!
@Exodus4x44 жыл бұрын
He won’t be off-roading it aggressively enough to change the front drive shaft. Normally I would change the front driveshaft though.
@snowmeowoutdoors8024 жыл бұрын
Really like the look of 2.5" lifts. I think they're perfect at 2.5" with 37". I got a full Teraflex lift coming for my JL.
@JesusGarcia-fr5up4 жыл бұрын
Did you have to re Gear? Whit the 37's?
@snowmeowoutdoors8024 жыл бұрын
@@JesusGarcia-fr5up yes. 4.88 but I have a 6spd not the automatic. It's probably not as bad with the 8spd auto.
@davewoodard14 жыл бұрын
Love the wheels! BUT you never got back to the “name change”?...or is that in the next vid...ok watching next one..
@Exodus4x44 жыл бұрын
You’re right we didn’t. Truth is I haven’t really figured out what that name is going to be yet.
@eugeneenslow85634 жыл бұрын
@@Exodus4x4 "Exodus JPs"?
@JohnJamesOfChelsea Жыл бұрын
Looks great!
@AngryIrishman13 жыл бұрын
Could you go with a 38 inch tire without issues? Really like that new springs are all that are required to add more tire (along with driveline stuff). I've also heard that the 2.5 lifts are usually higher than that with EVO lifts.
@jkustockaphobia24214 жыл бұрын
Red with bronze looks bad ass 👍🏻 Good choice on lift .. EVO makes good shit .. not to mention King; those r sick too
@danielsmith22742 жыл бұрын
I have a Mojave edition and I’m looking at doing this same size lift. I was looking at fabtech. What is your honest opinion on that lift? I looked at evo also
@Exodus4x42 жыл бұрын
I would not touch the Mojave. What is on it stock is high quality stuff, why change it?
@danielsmith22742 жыл бұрын
@@Exodus4x4 I was just thinking of 35’s and a winch and new front bumper
@Exodus4x42 жыл бұрын
EVO makes a 2.5” lift with shock extensions, that’s the ticket
@eugeneenslow85634 жыл бұрын
Bronze rims definitely look GREAT. For this customer's work use, the lift is appropriate and not overkill.
@jefflyon46014 жыл бұрын
Nice Build! The wheels look good, nice lift height balanced
@samc32274 жыл бұрын
Hard to make a red Jeep look bad but I like it
@Gonzo19684 жыл бұрын
Badass build ,love the bronze wheels with the red!
@PreonEnergy4 жыл бұрын
This is exactly what I want to do. I agree, it just looks better with a lower profile. However, one question I have is, how much articulation am I giving up by going with a shorter lift? Is the travel difference the same as the lift height difference? Meaning I would get two more inches of articulation with a 4.5 inch lift kit? This would matter to me since I still want to do some 7 rated trials in Moab.
@Exodus4x44 жыл бұрын
For Moab I would recommend a minimum of 4.5” if lift and 37” tires.
@samhouston52174 жыл бұрын
I like the proportion look to that with 2 inch lift and the 37's. I have a mojave. I'm looking at doing a body lift mainly because the mojave has such a sturdy suspension I hate to downgrade it for a suspension lift. I am a novice so I am wondering am I wrong?
@sethnewman17552 жыл бұрын
I’m looking at getting the Mojave in about a 1.5 years. How do you like it? It would be my first jeep
@bryantwhittaker60864 жыл бұрын
Another great video. What was the name of the set up that was capable of 2.5-5" of lift from the one system? Sorry forgot which video that was to go back and look it up..
@Exodus4x44 жыл бұрын
Most coilover systems have that range of lift. Be sure to check out the EVO mfg systems on our website
@chuckcribbs33984 жыл бұрын
Does it have wheel spacers??
@Exodus4x44 жыл бұрын
Negative
@lesszabo56254 жыл бұрын
Great looking setup, and the wheels really pop!
@ThisCrazyLifeOfFive3 жыл бұрын
How much do all of the additions cost all in? Looking to do something sinilar
@Exodus4x43 жыл бұрын
About $10kish
@chrissmith73644 жыл бұрын
The answer is, yes!
@jefferyselin60884 жыл бұрын
I like the build!
@4_lolife4 жыл бұрын
Ok, I'm gonna be that guy, can I have more info on the light bar mounting hardware? By the way, this video is very informative as I need to decide which way to get my Rubicon JT lifted.
@4_lolife4 жыл бұрын
Never mind, I saw it. I was hoping this worked with a Rugged Ridge Snorkel but it's still in the way.
@karmicforce014 жыл бұрын
@@4_lolife Look at the Quadratec Stealth lightbar system.
@cgscprspecialist39374 жыл бұрын
A new name?
@ThePalominasPiper4 жыл бұрын
Both rigs look great!
@sorenmelchior4 жыл бұрын
Love the bronze wheels.... Hey that brings a question to mind. What wheel manufacturer makes a quality off road 17x9 bronze or copper finish bead-lock wheel? I am trying to decide on what wheels to put on my 2" lift teal (bikini) 2 door Rubicon with powder coated to match Road Armor stealth fenders (higher clearance than stock Rubi fenders) running BFG KM3 37 13.5 R17's and I am unsure of what backspacing might be necessary running on the stock 44 axles (with 5.13 gears soon to be installed). I looked at the Method 106's but I am unsure of how good they are, even if they look awesome I need something that will handle the trail more than how pretty they are.
@Exodus4x44 жыл бұрын
The wheel in this video is a beadlock, so there you go!
@sorenmelchior4 жыл бұрын
@@Exodus4x4 Haha...Good answer!
@Exodus4x44 жыл бұрын
Actually I was thinking of a different build. Method is the one that makes good looking bronze wheels. Check them out.
@sorenmelchior4 жыл бұрын
@@Exodus4x4 Cool, thanks for update.
@snowmeowoutdoors8024 жыл бұрын
Venomrex makes some sick non beadlock wheels. I have em on my JL in gunmetal. They look good and don't have that mall crawler look.
@bhbdvm18214 жыл бұрын
Would this lift work well if I only wanted to use 35 inch tires? What I mean by work well is : look good, maintain a great stock or better than stock daily driver ride? Thanks!
@Exodus4x44 жыл бұрын
Absolutely!
@markgosser95784 жыл бұрын
Looks awesome! I have a red Launch Edition and love my stock black wheels but if I upgrade might go with these wheels.