2 Mowers Mud Ride (Hydromatic VS Manual FNR)

[@nrgtwinz95]

Troy was insane! Orange did good too. And zombies back home.

[@chud327]

Thanks and that is cool to hear. Thanks for watching.

[@LaneProductions327]

Awesome video!! Love the father and son mower video. Should Defintley make more!

[@chud327]

I will ask him more often. Thanks for watching!!

[@droptheblades895]

your absolutely right about getting the belt wet with manual mowers, sometimes it will even keep driving when you push the clutch in if submerged

[@chud327]

Some of mine don’t care, Troy doesn’t like water. Thanks for watching!!

[@nrgtwinz95]

My grandpa has a 5 speed Murray just like infernox used to have. It ran when parked deck was just shot. But it has a nice 16 17 hp. Engine. I'm going to get it soon I'll either do a slammed mower build or I'll use the engine on another project?

[@chud327]

Think about doing a mud mower too. The boy's was going to tuff stuff even with the turf tires still on back. I could not explain how, but it was good... thanks for watching.

[@nicolec7290]

Got your reply,ty. Going to try it 👍🏻

[@fishlegsrn]

that thumbnail looks fire😂

[@chud327]

The son made it for me... Thanks so much and thanks for watching!!

[@liljoeii6091]

Pretty good video thank you for the video

[@chud327]

You are so welcome and thanks so much for watching.

[@rosao7720]

Hi, I have a question. I want to buy a lawn mower and I found a Yard Machine with Automatic Transmission. Do you think it would be a good option for mud because it has the exhaust outlet in the front at the bottom, Let me know your opinion. Thanks.

[@chud327]

If that is all you can find, go for it. I would look for some thing different with a manual trans. Thanks for watching!!

[@Davidschreiber-mm1jw]

sick video love the mud mowers

[@chud327]

Thanks so much and thanks for watching!!

[@Devlin_Staples]

Hey man love your content quick question what is a good price for a stock mower that you would want to make into a mud mower

[@chud327]

I try to get them for free, but that is rear. My last one I am working on now was just $50 with a briggs v twin too. The older bigger ones go for more, I have paid 100 for one and $250 once for the big old craftsman mowers. Good luck and thanks for watching.

[@Devlin_Staples]

@@chud327 thank you and your welcome👍

[@logansbuff9823]

Do you now if you can swap the front and back pulleys on a 1996 craftsman manual

[@chud327]

I doubt it, the shafts are usually different sizes... Good luck and thanks for watching!!

[@logansbuff9823]

@@chud327 another question I put a new carb on it and it idles and runs great but it like doesn’t stay at rpm it’s like going up and down like you rev it all the way up and it feels like the governor is engaging on and off

[@2WheelBraydon2]

Got the same model husky, but with a deck and not the battery thing on the floor, and without mud grips

[@chud327]

Very cool, I used to hate mine, but now I am pretty fond of it. With a little work it had a big change. Might modify more some day. Thanks for watching!!

[@2WheelBraydon2]

Yeah, I gotta do some work on mine, it’s around 18 years old, and dang it still runs.

[@chud327]

@ love stories like that!!

[@nicolec7290]

The guy with Nike muddy boots is getting stuck more often. Good video

[@bazilwreckerloughead]

Yeah, like you said; Troy seems more capable than the Husqvarna in the mud, but in the water it's the opposite.

[@chud327]

Exactly and thanks for watching!!

[@Random_content53]

What does hydrometric and FNR mean?

[@chud327]

Hydromatic is like automatic, has less gears, runs on fluids. FNR is Forward and Reverse gears in the trans, makes it speeds with vary drive pulleys... hope this helps and thanks for watching.

[@Random_content53]

@ ohhh okay

[@Cody-lx6ti]

Where do you get those mud tires?

[@chud327]

Tractor supply used to sell them, but I get most of mine from marketplace. Good luck and thanks for watching!!

[@pawelsawczynski9073]

Hi Chud, what kind of engine this craftsman has?

[@pawelsawczynski9073]

Ok, nie i know. Was not watchingbfrom begining,

[@chud327]

Nice and thanks for watching!!

[@chud327]

Craftsman?

[@thechannel9637]

Hey chud I’m getting a 6 speed manual craftsman and how do I know what belt to put on after I pulley swap it?

[@chud327]

It is a guessing game... I like to take mine to the store and try some on. Otherwise, it is a bunch of trips back and forth. Thanks for watching!!

[@cheegebvvbvvbbhggf8638]

Which mad mower is the best in the mud

[@chud327]

Out of these two, Troy was super except in deep water. Out of all my mowers, it is probably Commander Emily or Colonel Craftsman. Thanks for watching.

[@cheegebvvbvvbbhggf8638]

How many mud mowers do you get running

[@cheegebvvbvvbbhggf8638]

And I love your videos so much

[@droptheblades895]

yo chud, you ever blown many manual transaxles. iv built my mower quite rugged and drive it hard, if its not bellied it's most likely not stuck! I'm not good enough at filming yet so never get shots of the best driving and most of the rides are at night. the new Step Angel lug tires are so good they make standard lug tires look like terf tires when offroading but break the teeth off gears every so often. might need to make a transfer case out of a dirt bike motor and put in a dif from an atv and make it chain-driven to stop belt slip underwater. as well and a water tight spark plug boot and snorkel for deep water. ant thoughts

[@chud327]

I try to keep mine simple and cheap, but I like your idea. I have been hunting a little diesel for snorkeling and going deep. I have only broke one manual transmission so far. I wanna see your step angle lugs and so ride action. I feel like a lot of fun happens after night, but my camera don't like the dark. Thanks for watching!!

[@droptheblades895]

@@chud327 if your trying to find a vertical shaft diesel that would be quite hard. Good luck

[@droptheblades895]

@@chud327 if your trying to find a vertical shaft diesel that would be quite hard. Good luck

[@chud327]

@@droptheblades895 true, all seem difficult and expensive…

[@BuckShot-kz7qt]

Looks like the belt is slipping on the Husky cause it doesn't seem to be spinning it's wheels after getting into the deeper shit. I think the belt got wet or covered in mud.

[@chud327]

Yep, the slip is real, thanks again for watching.

[@BuckShot-kz7qt]

Looks to be like that Troy built is a bit more rugged and better than the husky all around.

[@chud327]

So true, except in the deeper water. thanks so much for watching. BTW, Husqvarna is better now than it was then.

[@Random_content53]

The husquarvarna sounds like it’s surging a lot needs a carb clewn

[@chud327]

If you watch where I pulley swapped the husqvarna, it put a gas pedal and exhaust, it sounds 100 times better. thanks for watching.

[@nrgtwinz95]

I have a video should be out tonight , zombie mud run!

[@chud327]

Ok, will be waiting, will it be a premiere?

[@scufxz6841]

Please fix the surging on the husqvarna lol

[@chud327]

That is next on the list for it, I hate listening to that... Thanks for watching!!

[@amandaeachues2876]

Fr

[@Mo_2118]

I think troy needs a custom exhaust, and special agent orange needs the seat switch removed

[@chud327]

Thanks for reminding me, I complete forgot about the name "Special Agent Orange"... We will see on the suggestions and thanks for watching.

[@Mo_2118]

@@chud327 no problem, I need to fix all my mowers, they're all broken...

[@rucebaybruce6174]

#TRUEFAN

[@chud327]

As always, I Love that and thanks for watching!!

[@spinem4u]

Now that’s a good spin up

[@chud327]

We had a blast and thanks for watching!!

[@blackbettythemudmower]

Oh ya

[@chud327]

Thanks again for watching!!

[@Dallas_kvg]

the driver in the husky is a softer driver

[@chud327]

Maybe so, but that's all the mower would do back then. Please check out my recent video on it full of modifications, it is more of a beast now. Thanks for watching!!

[@J_Beazy223]

Its all fun and games until you get the nikes dirty

[@chud327]

Funny and thanks for watching. You blue one should do as good as troy or better if it gets faster....

[@J_Beazy223]

@@chud327 im gonna give it a go. You and some decent weather got me motivated to get after the project. Thanks for the inspiration

[@s1lenc7]

Those were some deep trenches, huh ?

[@chud327]

I can believe Troy did so good. Thanks for watching!!

[@--turningwrenches]

What's up

[@chud327]

Not much, how about you. Thanks for watching!!

[@droptheblades895]

gas prices

[@danjones3286]

One of the mowers is hunting not a good thing

[@chud327]

I hate the surging, but if you watch the latest video I it, the surging is 😊 me. Thanks for watching!!

[@WilliamLipinski-tz9sl]

Hydro static with an s

[@chud327]

Yes and thanks for watching!!

[@nicolec7290]

Hydro stat just isn’t good enough

[@chud327]

I agree, but now that I have pulley swapped it, it does so much better.... thanks so much for watching.

[@nicolec7290]

@@chud327 Smaller ?

[@chud327]

@@nicolec7290 small in the back or bigger in the front. I changed the front.

[@scrambler69-xk3kv]

Hydrostatic NOT Hydramatic. which is a GM automatic transmission used in GM vehicles years ago. Do some research next time wow.

[@grant2122]

It doesn't really matter what he calls it

[@chud327]

Thanks grant and thanks for watching!!

[@chud327]

Wow, Only thing is, if I say it right, I get less comments... Thanks for watching!!

[@lucianopiz8490]

No one really asked or cared pipe down 😂