2001 Audi A4 1.8t Quattro Oil Pan Replacement.

[@xide7123]

Hey bro, I’m gonna do this job soon enough, just wanted to thank you for this video! U probably don’t have the same car anymore, but have helped a lot of people during these years! Thank your past self for this ;)

[@aronnagy7569]

The fact that this video has almost a 100k views. Gonna do it tomorrow, thanks for the video!

[@ccright8285]

Hey what's up, I did this job in November thanks to this video. That bracket out front has to be taken off, to do that I had put the car in "service position" which means to pull the front end off....... BUT don't fret!!!! you do not need to pull it off completely, just about 3 inches will give you room to drop that bracket (make sure your face isn't under that bracket, cause its actually pretty heavy lol) thannn you should be able to drop the pan

[@dylanandmichael1]

u my friend are amazing been stuck doing this all day thanks

[@queenkk9749]

good job

[@ccright8285]

Hey dude great video, 2 minutes into the video I knew it was going to be a good video. I'm going to be doing this on a 1998 VW Passat wish meee luuucckk :) again great video cause I was dreading the shit out of this job too, I've GOTTA do it now thanks to construction of the windmills in Ontario.

[@javiercabrera5098]

thanks for the video man!

[@ToxicCarPerformance]

Good luck and Thank you!

[@thompstaff]

Wow, gotta do this on a 1998 1.8 Turbo, I see a couple off ppl have talked about long screws and brackets they didn't get off, just b4 I start did you miss anything out at all? Important to listen to your chit chat as well I guess :) Any way, one damn good video mate, thanks a lot :)

[@ToxicCarPerformance]

Good luck!

[@jimmyconway7554]

good job!

[@ToxicCarPerformance]

No problem! thank you!

[@tonydahlberg3136]

Good video man, ive gotta do this as well due to sludge and its nice to know i can do it myself. Did you run any cleaner through the engine or replace the oil pick up screen when doing this?

[@brendancollins8706]

Great video. Thanks.

[@ArcolaBridge]

but didnt you have to jack it up from the oil pan? or where did you jack it up from?

[@somepwnguy]

I had to replace the oil pan on my audi, then seriously 4 days later a truck ran me off the road. Now i have to do it again.

[@ToxicCarPerformance]

You're welcome!

[@DrFeelUp]

Would this be the same process for an 03 A6? Please let me know asap. THANKS!

[@wizzosends]

Im going to start this tomorrow, so i do not have to drop the subframe so i can wiggle the oil pan out? Dropping the engine is enough? Also which tool would u suggest for the bolts between the subframe and pan that are hard to get to? :)

[@rarerides]

How much should I be paying a shop to replace mine? I cracked mine today also...I don't want to get ripped off

[@shorty5150]

I know this was 6 months ago but I too am stuck on that same bracket at the front how did you manage to take it off? thanks in advance.

[@charles1989ish]

Hey so I'm having to replace both the lower and upper oil pan on my 1999 a6. Did you have to detach the cv joints before you were able to lift the engine that high?

[@MrHydd]

Great video, but i've Got a quastion. What did u use as gasget ?

[@anthonyaparicio4838]

How much does the panel cost I broke mine 2 days ago now I can't drive to work.

[@MartinFarrow]

Did you have to drop the subframe or were you able to get enough clearance just jacking up the engine?

[@michaeldueck7010]

Also no matter how high i seem to jack the engine I cannot get the last long bolt out? any suggestions?

[@miguelRivera-up9qq]

how much did u torque the oil pan bolts thanks

[@heathspring972]

Where did U get Ur sump pan

[@michaeldueck7010]

Hey Great video man. I have a 98 A4 1.8t and I'm stuck on the last long bolt that won't clear the crossmember and the bracket on the front of the engine is not allowing the oil pan to pass either. On the bracket towards the front their is this smaller piece that is welded to the bracket kinda u shaped and doesn't attach to anything? Im thinking about cuttng it but its gonna be a bitch cause its in a tight space. How did you get past the bracket on the front?

[@shorty5150]

I am in the process of doing I am stuck with a pan bolt at the front of the car there is a metal plate blocking access to this bolt. Did you have this problem.

[@helvijsblumentals3305]

shorty5150 yea, i have the same problem

[@thethrebestnoobs]

theres a nut holding that idler pulley take it out and then insert a screwdriver into the metal plate and start pushing forward to move it out of your way and insert the allen key at the same time. i did this by myself.

[@chinchillakilla100]

so is that just the lower pan or both , my sis in law has 96 a4 same problem i think , forums say lower pan two hour job

[@joemaldonado6587]

Is it the same as the a4 turbo 1.8 on a 1999?

[@ToxicCarPerformance]

I needed it done quickly or I probably would have replaced that. The car didn't completely run out of oil I stopped right after I bottomed out.

[@m.muller9379]

hi, wich headlights in your Audi ?

[@ToxicCarPerformance]

They used JB weld to fix an oil pan?

[@ToxicCarPerformance]

I didn't have to on my A4, but I'm not completely sure if you would have to on an A6.

[@Da_Homie_Chuy]

i want to try this myself tomorrow, but damn im missing a second jack..

[@tigr8787]

Where did you find the oil pan?

[@Toiletmanable]

sounds like cam tentioner was compromised from oil starvation. I would have also done oil pump and rod bearings while I had pan off.

[@eduardobustos1812]

How can i change oil pump for 02 audi allroad plz

[@nimatellah]

Hello. Im working on my 1999 Audi A4 1.8 Turbo. So i did follow everything on the video, but i cannot take it out the oil pan now... Could you help me...??? I take off the thing on the front bracket that has 3 bolts but how do i remove that bracket because its wont let me to take the iol pan off...

[@kenj510]

we have the same problem . how did you get around that ?

[@ReptiAddict]

I'd comment my current situation with my 03 passat 1.8t but you dont reply

[@codyace]

thanksman!

[@ToxicCarPerformance]

I got enough clearance from just jacking up the engine.

[@rogeronslow1498]

It took you 11 hours! Don't decide to do this for a living as it should take you 2h max.