2001 Ford F350 7.3 4x4 Dually Powerstroke - 2015 Interior Seats upgrade swap + new carpet install

One of the best upgrades i did on my F350 was upgrading from the junky stinky ripped stock seats to the new style 2015 seats and installing sound deadning and new carpet as well. It made the truck so much more enjoyable to drive. Smells good and new. Cant wait to upgrade the dash to the newer model and nose to 2016. More F350 content and 67 Mustang coming up!!
🔥FixitNick Merch ► teespring.com/stores/fixitnick
📺Subscribe and hit the notification bell! ► bit.ly/2W4e5BN
I get my music from EPIDEMIC SOUND bit.ly/2H9ji23
My Amazon Garage ►amzn.to/2QlHZdO
🎥My Video Recording tools
1. DJI Osmo Pocket: amzn.to/2LUtOzr
2. Insta360 One X: amzn.to/2Yy64T2
3. Samsung 128GB Micro SD: amzn.to/2YwT9AE
4. iPhone 8 Plus 256GB: amzn.to/2LSvj16
FixitNick on Social:
Facebook ► / fixitnick81
Instagram ► / fixitnick
PROJECT COST:
2001 F350 7.3 4x4 6 Speed Dually
135,000 Miles
F350 Auction bid - $5,700
Auction fees - $540
Delivery cost - $650
•REPAIRS•
New wheel - $310
New tire - $130
F350 Pair of leaf springs - $240
F350 RH leaf spring sold - (-$60)
eBay Driver dually fender - $450
eBay Driver dually fender refund - (-$400)
eBay Driver duality Fender sold - (-$120)
Another Drive Dually fender - $400
Taillight - $20
•UPGRADES•
Floor mats - $30
Tailgate Assist kit - $50
2" level kit - $60
Smoked Clearance Covers - $15
Smoked Marker Lights - $20
Orange LED Bulbs X8 - $40
Red LED Bulbs - $10
White LED Bulbs X10 - $15
3 LED Rear Bar - $10
Bed LED kit - $15 (install vid coming soon)
RiffRaff Intake kit - $100
TOTAL COST: $8,460

[@FixItNick]

Merch ► teespring.com/stores/fixitnick My Amazon Garage ►amzn.to/2QlHZdO 🎥 My Video Recording tools • DJI Osmo Pocket ► amzn.to/2LUtOzr • Insta360 One X ► amzn.to/2Yy64T2 • Samsung 128GB Micro SD ► amzn.to/2YwT9AE • iPhone 8 Plus 256GB ►amzn.to/2LSvj16 FixitNick on Social: • Facebook ► facebook.com/fixitnick81 • Instagram ► instagram.com/fixitnick

[@iainf6]

Great job Nick, those seats are way better and it must smell sweeter too. Good job with the editing too 👍🏻👏🏻👏🏻👏🏻👏🏻👏🏻

[@FixItNick]

Thanks as always :)

[@tbonemurray2651]

Way to go, seriously detailed work

[@vanceharmon3481]

This is insane. This is the second video I have seen where they used a pressure washer to clean seats. There's a thing called upholstery cleaner. Like the green machine or carpet cleaner's usually have an attachment. They are safe and won't damage the seat. Ps they remove the soap and water as you use them. Using a pressure washer it leaves the seat wet and could even leed to mold if they don't dry properly

[@CarlosRodriquezdrexelmart]

Awesome job thank you i will do that to my truck tomorrow

[@AntonioClaudioMichael]

Just a great all around video love the new seats and what you have done in the interior so far that grey is 👌 @FixItNick

[@FixItNick]

Thanks bro, I hate the tan yes

[@abdullahsaad9340]

Wish you the best man .. good job 👍🏻

[@FixItNick]

Thanks man

[@truthx5854]

Great work Nick 👏🏼

[@FixItNick]

Thanks

[@nicolasc3360]

Love the vids

[@sipzter]

Another great job! Thank you !

[@FixItNick]

Thank you

[@StrokerDiesel]

Any time you can find a good set of seat is a good day👌👌

[@FixItNick]

Yes sir :)

[@AK-Star007]

vehicle got a new character.👍👍👍👍👍

[@FixItNick]

Yes sir, feels much newer and not so 80s eww

[@OhDamniiiTsRey]

Been wanting a vid for a mcnasty front end swap! After my 8 inch lift, next step would be 6.4/6.7 interior minus the dash swap. Keep it up nick! I follow you on IG as well.

[@FixItNick]

Thanks man Appreciate it, yes I want to do 2016 nose swap after I catch up on few things

[@pierrec6187]

Thank you for the video. I also want 6 seats. My question is about the center console. The video does not really show the 2 front bolts? were those also existing whasers that could be drilled and tap or did you have to go around the transmission to fish bolts or nuts? I would be surprised if it was only held by the 2 back bolts? THANK YOU again.

[@vladshestopal6100]

Gots to get the new style mirrors

[@FixItNick]

Yes I agree

[@AntonioClaudioMichael]

Great video Nick man when you are ready to sell that Ford let me know bro looking for a new service rig and that beast would be a great addition to my arsenals very hard to find 7.3 L in duallys @FixItNick

[@marshallstoddard9420]

Great job what size bit did you use to get your seats out?

[@aaronandhayleyskinner3249]

Do those newer seats have the anchors for car seats on them instead on having to use the seatbelt?

[@destinrivers9501]

Fixitnick do the 11 to 16 seat bolt up just like factory or did you have to do some modifications?

[@crewzero3586]

Didnt you already upgrade the seats?

[@FixItNick]

Yes this was a re-edit while I’m making new vids

[@darinhill5351]

What was the tool you used to burn the holes in the carpet?

[@Mike-xn1bh]

Will the front 2015 Super Duty seats bolt into the front factory holes of an Excursion?

[@smitty4699]

were there extra holes you had to drill for the back seat to do the conversion to the newer fold up seats?

[@musicaustinwalton5602]

How you doing today love your channel been with you since you got the Silverado wanted to ask have you thought about doing an exhaust when you're 7 3 F-350?

[@FixItNick]

Hey bro, exhaust? Here you go kzbin.info/www/bejne/Y17bnYavpN5rmLs

[@SlowTundra]

Next upgrade, 08-16 tow mirrors, or the 17+ tow mirrors, whichever you prefer. I got mine at 1aAuto. Brand called Trail Ridge. It's closest to OEM specs as possible and the images on the mirrors will not look distorted compared to other brands.

[@FixItNick]

I like the 8+ mirrors, I’ll check them out, do OEM mirrors need rewiring?

[@SlowTundra]

@@FixItNick not exactly 100% but i believe the OEM mirror has a different electrical adapter. but i know you are good with wiring then it will be no problem for you. Also jimmi jammers on all your door handles are cheap and a great security layer for truck. especially these super duty trucks are the most stolen in the country. but seeing as your truck is a manual, thats probably the best theft deterrent 😂

[@Man-Up-G]

The seats were just bolt in? no new holes were drilled for fronts?

[@therealist1872]

Wheee did you get the carpet from?

[@darcybrawataakaontariostac6835]

Awesome

[@FixItNick]

Thanks

[@ericmoore5035]

What you use under the carpet? Brand and where did you buy.

[@FixItNick]

Just foam padding with sticky backside nothing special

[@317808941]

Last question what is the tool that appears to be boring holes,in the carpet at about 7 min point in the video? Thanks

[@FixItNick]

That is just a pipe, I heat it with a torch, hot metal makes hole in carpet

[@317808941]

@@FixItNick genius, thank you.

[@CSXtrackworker]

Didn't you already do this a few months ago?

[@FixItNick]

Yes I did a series, put this into one vid for easier viewing experience

[@jonnysimpson093]

Did you bend the gear shift?

[@FixItNick]

Yes

[@317808941]

Seats get soaked and then just air dry?

[@FixItNick]

Yup, in CA heat dries fast

[@317808941]

@@FixItNick thanks. In San Diego so I’ll give it a shot when I pull it all out of my 97 to replace the carpet.

[@k.a.v.8777]

👍👍👍

[@thingocthanhdinh9550]

where will those car go after this?

[@FixItNick]

I keep I drive I enjoy I sell when ready for something new

[@thingocthanhdinh9550]

@@FixItNick ok :D

[@omarzowila]

First Comment

[@FixItNick]

Cookie