2002-2006 Honda CRV Tensioner pulley replacement.

[@gregm8000]

Engine mount doesn't need to come out.. a simple deep socket for the bottom bolt is actually simple. I was surprised. Save removing engine mount 😁

[@sarahstinespring2994]

Thank you for this...super helpful! I'm getting ready to change my sisters out in a couple day😅

[@SFMCOLLECTIVE]

Hell yeah!

[@bradleyhayslip468]

Thank you sir

[@SFMCOLLECTIVE]

@@bradleyhayslip468 no prob🙏

[@leonardsmith3833]

Awesome ✅

[@SFMCOLLECTIVE]

@@leonardsmith3833 👍👍

[@stevestanley5183]

thanks for sharing.

[@anthonyskube]

Great video!

[@SFMCOLLECTIVE]

Thanks 🙏

[@EddieNYC02]

Thank you 🙏 for your feedback I have that same issue.

[@mgbretro]

Do i have to replace the entire pulley or can i just replace the black part with the small bearing to fix the rattling?

[@SFMCOLLECTIVE]

If the whole part is shaking like mine was from the housing youve got to replace the whole part if you just have a bad bearing wheel then just replace the black wheel correct.

[@МаркПримак]

Thank you, very useful video.

[@rhertz9829]

GREAD vid. THANKS! But if you take the pulley off the rest of the tensioner, you don't have to remove the motor mount.

[@dannynica7480]

I have a 2005 and yes, You have to remove the mount, there is not enough room

[@rhertz9829]

@@dannynica7480 I did what I said on a 2002. Why would I make that up? Unless there are differences between these years. 🤷🏼‍♂ See Greg's comment below.

[@dannynica7480]

@@rhertz9829 Maybe your year is a little different, but on the 2005 you dont have room not even for that belt tool. As in the video, i had no room, that belt tool hits that part of the mount making it almost impossible

[@rhertz9829]

@@dannynica7480 We may be talking about 2 different things. What I meant was, I was able to remove the tensioner pulley, and then the tensioner without removing the motor mount. I did get the belt off first (of course) but to put it back on, I had to use the bottom method, 23 minutes into this vid: kzbin.info/www/bejne/kGGzknVul7Csh6c

[@jackbnmbl7]

I just wanted to replace the pulleys, not the tensioner.

[@gregm8000]

You can. It's just one bolt on the pulley.

[@rgraz4929]

That's what I wanted to see. I have a noisy tensioner pulley bearing but the tensioner is fine. Just turn the 14mm bolt (you normally use to release the belt tension) counter clockwise and remove the pulley? Is that it? Thanks.

[@rickyricardo9513]

Thank u was great help

[@fernandoguerrero4145]

Good video

[@Doosterify]

Gopro cameras are garbage. I bought one and was really pissed off how unreliable it was. I missed getting tons of videos because it was such a piece of crap.

[@SFMCOLLECTIVE]

You know what? Id have to absolutely agree with you. Im not impressed with them either. They die, freeze, dont upload properly, i mean the list goes on all the way down the SD card malfunctioning. 100 percent agree with you.

[@nicnadu0515]

Couldn’t agree more my go pro experience has been terrible just because of how unreliable it is

[@weknowhisvoice9296]

Turn to Jesus people, he died for your sins. Repent of what the New testament describes as sin. Believe the gospel get baptized and obey the teachings of Jesus. The gospel and the teachings of Jesus are documented in Matthew Mark Luke and John. Jesus is the only way to be saved, if you have faith in Jesus through your faith you will live by his teachings. God bless you all in Jesus name

[@SFMCOLLECTIVE]

@@weknowhisvoice9296 thank you have a blessed day

[@patent777]

Seriously? "Of course the Go-Pro died" ?? Cameras DO DIE if they aren't fully charged before a filming project 🤷‍♂️🙄

[@nicnadu0515]

You clearly haven’t used a GoPro 😂

[@righthand7965]

Terrible video...

[@SFMCOLLECTIVE]

appreciate it

[@righthand7965]

@@SFMCOLLECTIVE 🙌