2002 pt cruiser oxygen sensor and valve cover seal

[@johngate4715]

I just knew there was a way you could take that top shield off. Always get a 2nd opinion from mechanics. I had one guy, the only mechanic around my area that would change o2 sensors, telling me that the upstream sensor is only accessible from underneath the car, and he was trying to charge me an ass load of money to do the job. Thank you so much man. God bless you.

[@camarokurt]

Thank you for this video. Because of yours and one other, I did this job successfully on my wife's car for less than $40. in parts.

[@isatv5454]

Thanks for the video, men I was encouraged as a DIYer and did it on my pt, point of correction, you don't have to remove the cover if you have the O2 socket and extension, it will take less than 10 minutes to do the job, might help in clearing P0420 error if you have one.

[@dollybelfiore7628]

I LUV how you make it all look so DIY doable. Please continue sharing your talents. You have an absurd amount of patience, and your videos are beyond helpful. ... They're downright EMPOWERING!

[@wolverinemcstud194]

When I was a kid I was fascinated by a book called "the way things work" Everything in life is DIY, although I wouldn't recommend performing open heart surgery on the neighbor. It's only the universities and their BS certifications that damn us to believing we can't do things... and possibly our parents. The sky is the limit. Thanks for the comment :)

[@singerray1]

If you cut the wire off the top of old O2 senor, you should use a regular deep well socket if you have one. It will make it easier to get it out. USE THE SPECIALTY TO TO PUT THE NEW ONE IN.

[@josemiranda1241]

What a great opportunity to wash that cover...

[@VOISMAGRSD]

You're good. It took me 4 hrs to complete value cover seal .

[@jerprime624]

Nice job! I used q-tips to clean the divot of the gasket lining!

[@Skyrimnut]

Great video, showed me just about all other things I hadn't went into yet, good complete video brother.

[@MrPanchoduarte]

Dude.... I can tell that you are looking for fame more than knowing what you are doing. You sound frustrated and you are making rookie mistakes (not knowing that the oxygen sensor cable doesn't need to be cut with the proper wrench and calling the ignition coil a "carburetor switch") but it's a good learning experience for me with your fuck ups.... Like not covering the intake air valves! I hope your car still works.

[@titodenino]

Thank you for buying the o2 stocket even tho you had cut the wire

[@alfredoestrada9313]

Nice, good job and realistic

[@TheThejaketucker]

I yelled oh no! Like a dozen times ... thanks for the video hombre

[@kathylewis7543]

What did ypu use to clean the area the stuff in the can? Thank you for broadcast! I wish my 2005 pt cruiser OBD II not communicating code P0155, P0168 and P0572...my brake lights work and I replaced the brake light switch under the pedal last month! Help PT woes!!!

[@jesusgarciaarriaga8079]

Wolverine exelente video y mandame un Saludos

[@brendenbynum6810]

I love how he calls the electronic firing ignition a distributor cap thats a electronic ignition dude

[@pre1980box]

Man you are good, thanks

[@5533881]

Thank you for your videos.

[@gerv777]

Hi Eric, is the code P0031 Oxygen Sensor Bank 1 Sensor 1 Heater Circuit Low can fix the problem by replacing the O2 sensor the one you replace? IS O2 bank 1 sensor 1 in pt cruiser same location as where you changed yours in your video?

[@ДиМа-щ4ф6х]

What was the code in the beginning and after sensor replacement?

[@speedyesteable]

LOVED YOUR VIDEO,BUT WHAT SIZE VACUUM HOSE DID YOU USE?

[@bilzarkz]

So I just did this on my 2005. The oil was leaking into the spark plug Wells. Input everything back together. The car starts and runs. It sounds like there's a leak somewhere and if I go over 45mph the engine shakes really bad and tries to quit. When it's idling you can see it pulling the power from my displays and interior lights dimming and brightening. Any ideas on what I need to check? There are no more codes. Just not good power and I can tell there's a leak. I just cannot find it. Thanks

[@howiewill]

bilzarkz this was done before I watched your video. Just don’t know what I could have messed up. My hose cracked also.

[@KevinR1971]

If your lights are going dim to bright it’s a possibility that your alternator needs replaced.

[@jerprime624]

What kind of leak? Vacuum leak? Fuel leak? Diming lights could be electrical. Check ground wires too!

[@rudysison9010]

How many plug into your computer?

[@XxXSelmasaurusssXxX]

What is it that you're using to take the bolts out!? Really need one.

[@andreavallejoosterberg1444]

Please I need help: The computer gave as failure in my car PT 2006 : Oxigen sensor( lambda 2) bank1. Do you know if it is the sensor placed after the catalizer? TY!

Andrea Vallejo osterberg looks like you’re screwed

[@bobbest5005]

Anti seize on all fasteners please...including o2 sensor.

[@justindubray6813]

God why do our pts need so much work all the time I think it's just the way they made them guys

[@jerprime624]

It depends on maintenance of the owners. Stay on top of your stuff! I've put 900 dollars into my 01 PT Cruiser in the last 2 months! Because 90% of it was stock!! At 171,000 miles! I felt embarrassed for the previous owners being stupid.

[@andreavallejoosterberg1444]

Hi, whichj was the faillure? I need to know please

[@songztress]

what size ratchet were you using to remove the 02 sensor?

[@Themadscientist1969]

Keep learning:you need it...no disrespect, but teflon tape? wont survive 10 minutes on a hot exhaust manifold, so waste of time, should of used light coat of anti seize!! (never get it on any part other than threads--light coat--no gobs--more is not better!) To any potential "haters" before hand--I have rebuilt these engines (even changing pistons on original rods!) Try that one~! So before posting any hateful or otherwise non-useful comments to this--think again. Thanks. I encourage anyone who has interest in saving some dime to do their own repairs, but not all need to be posted to youtube! thats all..

[@wolverinemcstud194]

so, if you have the time for all those finger strokes and the know how. why not make the ultimate dyi video for youtube. You've rebuilt "these engines" so many times, you must have the golden key. A cat can be relieved of it's skin many ways, but wich is best if we never show our skills at the trade show.

[@KevinR1971]

I couldn’t figure out why he used the Teflon tape either. I always thought the o2 sensor always had some rtv red on the threads. Since rtv red can stand up to heat.

[@2putful]

@@KevinR1971 There is no reason for anything as that is 1part of the reason there is a plastic cap to begin with poster shows it ni the beginning seconds of video it is there to protect the threads and the O2 comes from them with anti seize applied to the threads

[@Skyrimnut]

Hahahaha great job!! This your first stooge video? Can’t wait for the rest!

[@Skyrimnut]

My brother used to say about me,.. KEEP HIM AWAY FROM TOOLS! Lol I made mistakes yeah, but COMMON SENSE PREVAILED! Hope yours does, otherwise. Stay away from tools!

[@MOREPOWERRACING]

Top

[@wlessfanable]

What codes were you getting before?

[@VOISMAGRSD]

use an ohmmeter

[@jorgevillafanaalfaro5089]

disculpa tengo un pt Cruiser pero me gusta mucha gasolina sabes que puede ser o que puedo checar

[@romanmendoza3152]

Jorge Villafaña Alfaro

[@romanmendoza3152]

Jorge Villafaña Alfaro si esturbo es normal todo carro turbo gasta mucha gasolina

[@romanmendoza3152]

yo tengo un pt cruiser 204 y tanviengasta mucha gas

[@romanmendoza7925]

Si tu carro es turbo. Es normal. Y esos carros lleban gasolina premium. Hi aceite sintetico.

[@cesarrdz81]

CAMBIA filtro de aire, las bujías ,el sensor maf y el sensor de oxígeno. Me dices como te fue; debe gastar 10km por litro en ciudad

[@geraldwurst]

Should edit the klutz move

[@sardarhaque1232]

Should be about 9 or 10 foot pound a fork for valve cover. That's too tight!

[@aragonmex]

i have code p2096 you can help me?

[@rudysison9010]

Who is that kid?

[@aidedcardenas5322]

two days ago my pt check engine light turn on and it gave me a code p1294 can someone tell me what is it that i jave to fix..then my car dint wanet to start yesterday but battery is nee a month pls..help me