Thank you for this video! Toyota royally failed with these lights. I just needed to change a bulb and it's absurd to have to remove the assembly for that but even worse that I had to remove part of the bumper too. Couldn't have figured it out without help!!
@BakaRed7711 ай бұрын
I knew that 1A Auto video had to be wrong about there only being two bolts.
@gridengine11 ай бұрын
Yep. Too good to be true 😂
@edmunoz652411 ай бұрын
Tricked me too, smh
@gridengine11 ай бұрын
@edmunoz6524 😂😂
@LordGchaos011 күн бұрын
This right here! I was so close to rage quitting
@grimakastatik Жыл бұрын
Now will this wiring job include the day time running lights to have halos and leds on too at the same time? Like, does what you have here, work with the drls
@gridengine Жыл бұрын
The halos will turn on with whatever you wire them to. If you find the wires going to your headlights that turn on the daytime, running lights, and splice the halo wires into those, they will come on with those.
@rushnerd2 жыл бұрын
Thanks for this! I bought the Spyder HID combo halo headlights. They don't document what to do well at all. I assume these are these are the same thing as they look almost exactly like mine. The only exposed wires are one black and one white. I assume the idea is the same though? I bought them with a HID harness, still gotta figure out how those work.
@gridengine2 жыл бұрын
Hey man glad we could help! And yes. The white and black wires are power and ground for the halos. You just splice them into whatever wire powers the lights you want them to come on with.
@MrZYouTube Жыл бұрын
Whats the HID harness for
@gridengine Жыл бұрын
It converts the regular bulb plugs to connections that work with HID bulbs. Much brighter and cool colors.
@SilverLarvitar4 ай бұрын
Hey just wanted you to update, did this method of how you spliced the wires work well in the long run? Does it cause any risk of electrical fire?
@gridengine3 ай бұрын
Still going 3 years strong!
@superkari28 Жыл бұрын
hi do you have a video of how to align the headligths of toyota celica 2000.. your headligths is angel eyes rigth? can you make a video of how to adjust or aligtn the head ligths
@gridengine Жыл бұрын
Our headlights are referred to as “halo headlights), and The adjustments are done by tightening or loosening the big Philips head screws in between the bulb sockets on the BACK of the headlights. 💪
@shafiqrocks Жыл бұрын
Hey guys! Thanks for the informative video! I want to change yellow halogen bulbs into these aftermarket headlights, any ideas what type of low beam and high beam leds are they? Some say H7 some say H4
@gridengine Жыл бұрын
Honestly, not sure, but the listing for the product usually suggests the correct bulbs to work with the lights 💪
@achelousaurusiii73465 ай бұрын
What are the headlights used in the video? I’d like to buy some for my Celica but the link is broken
@gridengine5 ай бұрын
Link in the description has been updated!
@engelbertogarciadealba9266 Жыл бұрын
So I got those headlights and set them up. I haven’t connected the halos yet but only one of my LED lights works. The passenger LED does not turn on at all, but before I put them on the same thing happened with the previous headlights so they are not the issue. I don’t know if it is a fuse a short or a relay messing it up. If anyone has any ideas lmk pls.
@gridengine Жыл бұрын
That sounds more like a wiring issue. Usually headlights are tied together so if you had an issue, both of them would have it.
@hanielbomb2 жыл бұрын
Hello me again so how are these lights holding on? Also did you adjust the beam pattern or just came out like that from factory thank you.
@gridengine2 жыл бұрын
Hey man! The lights are actually doing really well! And they came aimed pretty well out of the box, but they have adjustment screws for alignment
@alhamdullilahhnivek6553 Жыл бұрын
@@gridenginehey guys, i have the exact same headlights but cant find the adjustment screw for my life. any help to where it can be found on this headlight?
@gridengine Жыл бұрын
It’s most likely a Phillips head screw located somewhere along the outside of the low beam hole on the back of the assembly.
@alhamdullilahhnivek6553 Жыл бұрын
@@gridengine wow thanks for the extremely fast reply. i found it haha thank you 👍🏼
@gridengine Жыл бұрын
Let’s goooo 👌👌
@grimakastatik Жыл бұрын
@9:02 had me crackin up 🤣
@gridengine Жыл бұрын
All of the words 😂
@geekynewz2 жыл бұрын
Dammit A1 auto, and Toyota... that third bolt dafaq?
@gridengine2 жыл бұрын
😂😂😂 A1 is never to be trusted 👀
@geekynewz2 жыл бұрын
@@gridengine Happening right now : photos.app.goo.gl/J32kSHKpK58JFEi3A
@maritzapimentel50192 жыл бұрын
Hello what is your location I need to change the lights for my toyota