2003-2006 Kia Sorento Spark Plug And Valve Cover Gasket Replacement Part 1 Step-By-Step Walkthrough

[@godwinogbidi564]

This is one of the best videos I have seen in auto mechanic work. Kudos!

[@markjohnson6903]

Great job with all 3 videos Eric! I watched them all (3) several times and then played and paused during the valve cover gasket replacements on my 2004 KIA Sorento. Everything was as you illustrated. Put it all back together and it started right up with no leaks. Hopefully you have some more videos for the 2004 KIA Sorento. Mine has almost 300,000 milkes. Keep on keepin on. Thanks much!

[@build_ourown9253]

Getting ready to do mine right now. Misfiring. When I took the first spark plug coil out, it was submersed in oil. Glad Eric made this video.

[@billcallahan9303]

179,000+ miles on mine. No warranty work, no nothing, same plugs, Same Timing Belt, incredible Sorento 2005. Thank you for video. I do have a valve cover gasket leak.

[@super20dan]

mine leaks badly. this car has been in the shop dozens of time in its life. a real shitty engine desighn. rest of car is great. 155k on mine

[@super20dan]

you do know what happens if the timming belt breaks on these? kiss your engine goodbye.

[@ERICSDIYGARAGE]

Yes, Its a bad engine design but our 2003 kia has been bulletproof. it currently has 238k

[@daniellebrant1678]

I have a 2003 Kia sorento. Same as vid. Also have a valve cover leak. I paid 800 for the car. It was in rough shape. I added AT-205 to the engine oil. Leaked stopped in 2 days. Dry as a bone!!!!!! Alao good for restoring rubber bushings and hoses!!!! Amazon, ebay, walmart all have it. Order it now!!!

[@stevemacdonald1861]

Just did this job on a 2006 Sorento. Thanks for posting such a detailed video of the job. Lots of tips that saved time and most importantly frustration. Helped me out a lot. I can't believe how many bolts had to me removed. Many were just for wire/hose brackets. Again thanks for taking the time to make the video. Well done!

[@ERICSDIYGARAGE]

Steve MacDonald thank you, im glad it helped you out!

[@stevemacdonald1861]

Truly, Thank You! I don't think people understand the effort it takes to do the job, let alone produce a video at the same time. I've been working on cars for 40 years and boy do I wish videos were available back then. Although, things weren't as complicated, but just the same, always nice to see someone do it first.

[@AlbertMeza]

Holy crap! I will NEVER complain about replacing the spark plugs on my Saturn Ion again!

[@DonTonioDelCono]

Eric, you did an excellent job on this video. The camera angles were ideal. The lighting was just right. Lastly, you explained everything well. Thank you for taking the time to make a quality informative video.

[@ERICSDIYGARAGE]

Thank you I appreciate!

[@mikesmoot1090]

Man you did a hell of a job..... I've be a mechanic for years and it's always something new to learn, no shame in that. Have the same car to do this weekend. Thanks bro

[@ERICSDIYGARAGE]

thanks I appreciate it!

[@maxwellbeard8769]

Thanks Eric! Your Kia Sorento spark-plug/ignition-coil/wire videos have been so helpful!

[@ERICSDIYGARAGE]

Thank you for watching glad they are helpful 👍

[@toxicfew9042]

Excellent video! Thanks for posting. I wondered why the garage said they wanted $400 labor to replace just the spark plugs! I now understand why. This is just a time intensive job, but your excellent step by step and the tips you've added will make this cake! Thanks again and please keep making the vids.

[@KrisKYL]

Its an easy spark plug job. Shops wsnt to fool you into thinking they gotta remove the manifold but they dont. They just remove the throttle body which is simple. But if they are replacing the valve gaskets too then its makes sense for them to charge a lot. I saved a lot of money doing the spark plugs by myself.

[@rolando2392]

So after I remove motor and transmission, do I take the wheels and seats off before I can finally change my plugs?

[@tetzuo6039]

Seriously. This is INSANITY. I miss my 2001 Silverado.

[@PotatoeChipz]

This isn't even funny. Came to youtube after looking at my intake manifold on top and about to cry.

[@SynchronousSynapse]

Ughhhh. 30 degrees f right now. Only paid a 100.00. I got the crankshaft bolt broke issue. Fixed that, and was getting ready for the spark plugs. As bad as a Saturn l300 we had....

[@jro53]

.....yes

[@richarddavis4378]

How often do you change your timing belt, book says 40k, do people actually do them at 40k intervals. Seems everything on these is insanely difficult..

[@timothymcclain6611]

Thank you so much Eric, you are the man you need to have a account set up so people can make donations to you

[@MrBrick1981]

dude, THANK YOU..i have to do this all tomorrow and thanks to you, i know i got this

[@amber_noel9889]

How'd it go?

[@MrBrick1981]

@@amber_noel9889 got it done and I've been driving around for weeks

[@amber_noel9889]

Come to Tennessee and help me? Lol I'm glad it worked out for you! I'm missing cylinder 4 and the garage quoted me a lot for this job. Understandably, it's a lot of work. But I can't afford the 900 bucks and I feel so overwhelmed looking at all the work that goes into this.

[@MrBrick1981]

@@amber_noel9889 I know it seems a bit overwhelming... Even for me and I like to tinker with my cars... But it really is pretty easy step by step... Although time consuming. I definitely got frustrated... And be prepared to replace all your hoses and plastic lines along the way... But you can do it!!

[@amber_noel9889]

This is very detailed and I appreciate the pace you take. I believe I can do this, but I'm so severely overwhelmed. But I can't afford what the garage quoted me for this job. I might ruin my car, but that's not much worse than it is running and missing all the time.

[@davidoluwadare2787]

How did it go? 😁

[@robertoleeva985]

thank you soo much for taking the time to record and upload this.. your efforts are a god sent.!!

[@ERICSDIYGARAGE]

Roberto Leeva Thank you for watching!

[@desireerabbitt6647]

I swear he is sooooo dope for this It so appreciated sir you straight did it step by step n showed you doing it so if we didn’t get it we saw you go in exactly as you said this is dope n it’s appreciated GREATLY!!! YOu should post your cash app info for tips kuz this ish was DOPE!!!

[@desireerabbitt6647]

I swear he is sooooo dope for this It so appreciated sir you straight did it step by step n showed you doing it so if we didn’t get it we saw you go in exactly as you said this is dope n it’s appreciated GREATLY!!! YOu should post your cash app info for tips kuz this ish was DOPE!!!

[@ERICSDIYGARAGE]

Thank you!!!

[@shootar75]

Cheers buddy 👍

[@misterJJJoshua]

Thank you for an amazingly helpful and informative video. I'm throwing a Cylinder 3 misfire code and am doing a full tune up myself with help from this video.

[@ERICSDIYGARAGE]

Glad to help out thank you for watching!

[@Thomas998822]

Thorough, clear, professional, detailed, top-notch....subscribed!! Please do a timing belt video. You could literally use this video as a promo to sell future videos. I bought a Timing belt video from Ericthecarguy once. That was years ago, just a thought,, I would buy a video from you in a heartbeat Edit: I just went to your page,, first vid was cat delete for 06 altima 3.5. Coincidentally I was looking to do that earlier this week. I literally just bought a 05 sorento and 05 altima this month

[@ERICSDIYGARAGE]

Wow! Thank you for the motivation! I look up to ericthecarguy and it means a lot! Im planning on keeping the vehicle for 1 or 2 years more and the timing belt will need to be replaced so hopefully i can make one. If your planning of HP gains you will see a noticable increase in the mid to top end and if you get the se-r muffler it will sound nicer

[@Thomas998822]

@@ERICSDIYGARAGE Thanks for the info! Have to say it again best diy vid I've seen by far and I've seen dozens from the best YTers. precat deletes what's your take on deleting all 3 cats? Will it still pass emissions testing? Also I have to remove the intake on my wife's Sorento and my Altima to do plugs, PVC valve, compression test, throttle body cleaning, VC gasket... is there anything else you can think of that would be a good idea to replace, clean, or service while I'm in there or anywhere else really?

[@ERICSDIYGARAGE]

@@Thomas998822 its means a lot to me thank you for watching! You can delete them but you are better off getting headers since the bolt are probably going to break depending on how rusted they are. If you are going to the the cat delete i would do it while you are removing and replacing the spark plugs and valve cover gaskets you'll be able to remove everything much easier that way

[@super20dan]

don't attempt the timming belt on this engine unless you are an experienced expert on this engine desighn, you have been warned.

[@youautoknowjoe]

Thanks for the video bro, helped me reassembled the intake, i ended up with a ton of spare parts lol. i'm in AZ too over in phoenix, keep on going brother

[@josevillarreal3671]

You are the man homie

[@ERICSDIYGARAGE]

thank you I really Appreciate it 👍

[@72blueflash]

Good job young man. I've got to have this work done soon. To old to do it myself. I can now see why the labor cost are what they are. Thanks

[@ERICSDIYGARAGE]

72blueflash thank you I appreciate it!

[@rivieratalks]

Hi Eric, I'm having problems with my Kia hope you can help. First of all many thanks for the detailed videos they have been very helpful. Unfortunately my Kia is no longer starting and I have no idea what it could be. I started working on the car because a connection for the coolant hoses (back of the engine) was broken and I experienced an unpleasant smell from the engine because the valve cover gaskets were leaking a little bit. So I decided to do all at once including the spark plugs and wires. Once everything was put together the engine won't start and even sometimes backfires whilst trying to start. What I have tried so far: - PCV valve cleaned - Checked ground cables all connected and no oxidation - Disconnect air inlet - Brake cleaner in the air inlet - Verified that air mass sensor looks good / not damaged - Remote control unlock / lock - With a stroboscopic light verified spark plug cables - Battery is charged and new - Gas tank is full - Engine gets fuel - Fuel pump reset - Verified firing order and order of spark plug cables with your guide and Kia official guide - Replaced original spark plug cables - Compression test, all cilinders are between 12 and 13,5 bar - Spark plugs replaced - Placed the old spark plugs back - Verified spark plug gaps (all around 1 mm) - Read out but no faults (not a professional diagnostics computer though) Do you have any ideas what I can do or check? Are there any hidden security features that may require a reset? It's a Kia Sorento 2006, 3.5 V6 Petrol engine

[@spookytreats2195]

Very helpful thank you!!! Your patience level is super 👌

[@robertoleeva985]

I just did this job again, the valve covers went leaking.. Holly cow this is a big job. Shame on KIA's engineers.

[@morgzlah]

Thanks mate, I just finished valve cover gaskets and plugs in my wife's 05 Sorento. Your vids helped alot, especially with that nasty little bolt under the timing cover hahaha

[@ERICSDIYGARAGE]

that's awesome! I'm glad my video helped you out👍

[@johnbyrne4438]

A tip, if you can screw the fasteners back into the holes they came from, holding the object to the car, do it. That way you don't have to remember which goes where.

[@map190]

Very informative video. I did this job on my Sorento. a month ago. A rather nasty job but all turned out well.

[@armandoruizdiaz9780]

Thank you so much for these videos! They are really helpful. Now, I just need to ask you a favor: When you tighten the bolts from the manifold, how many feet by pound you need to do it? I need to read the numbers because when I watch the video (which is perfect by the way) I don't understand very well (English is not my native language). Also, I need the numbers of the torque for the covers of the valve. Thank you very much in advance! I'm planning on working on that over the next weekend in my Kia Sorento 2003, so hopefully I'll nail it thanks to all the help I've gotten from your videos! Thanks again!

[@ERICSDIYGARAGE]

thank you i appreciate it! i torqued the intake manifold to 15 ft and as for as the valve cover i torque them to 5ft and than re-torqued them to make sure everything was at 5ft.

[@velox731]

Great job with the removal of all the hoses and wiring harnesses! I am really good at removing parts but not good at replacing everything back together...I am afraid of having bolts left over or worse connecting wiring with other sensors. Nicely done!

[@ERICSDIYGARAGE]

velox731 thank you i appreciate it! and i hear you, i try to keep everything organized to avoid that lol

[@velox731]

Eric, do you still have the Kia Sorento? If so, have you done the timing belt on it? Thanks!

[@ERICSDIYGARAGE]

velox731 yes i still have the kia sorento, and i have not done the timing belt, planning on replacing it once the car hits 250k it has 230k right now

[@velox731]

ERICSDIYGARAGE. Looking forward to seeing that video. I like your work. Hope you have a great Christmas.

[@ERICSDIYGARAGE]

+velox731 thank you i appreciate it. Merry Christmas.

[@rickylaflour9294]

Good to see the sorento gang together

[@stevenhall657]

Thanks for the video, been looking at picking up one of these, you just helped me make up my mind to never do that.

[@sheliamoore5768]

I'm so serious... I had changed my mind so quickly

[@sandyhendrickson2033]

I didnt drive mine for an hour b4 my nightmare started and im still fixing shit

[@super20dan]

@@sheliamoore5768 was a difficult decision to buy mine . I knew about the pos engine going in but car was in excellent condition and well maintained . its a great car desighn except for the motor.also price was a steal on mine

[@TyroneJackson-dl6wm]

@super20dan only paid 900 for mine, so I don't care if it needs a motor

[@kimberlycastle9354]

I am in agreement with those who say this vehicle is just ridiculous to work on! Worse than FORD believe it or not.

[@redfairy1969]

Fantastic video!! Thank you Btw what kind of bird is that chirping near the end of the video??

[@elahntupai3075]

Thank you so much ,your the best brother ! Is there a part 2 ??

[@ERICSDIYGARAGE]

elahn tupai thank you i appreciate it. yes check my videos on my channel you'll be able to find part 2 and i also have part 3..

[@jaylong3581]

Great camera work , lighting and narrative. This far in changing timing belt might be a good idea as well?

[@ERICSDIYGARAGE]

Jay Long yes it wouldn't be a bad idea to change the timing belt, i decided to wait for the car fo hit 250k miles right now it has 230k

[@super20dan]

dont try the timming belt job. its EXTREMLY difficult .

[@themechanic764]

Took me 30 minutes to do the spark plugs. You dont have to remove everything, just the trottle body.

[@ERICSDIYGARAGE]

I also replaced the valve cover gaskets

[@arhester99]

I have a 2005 Kia sorento. I don't think I have to remove all of those parts. This is a great video but does anybody have shorter way to get to plugs

[@kmuinde]

Same thing I did with mine 2 years ago I never removed the wiper facia or battery I only disconnected the - ve terminal

[@cringlezz]

Good to know i dont have to take apart everything if im just doing the spark plugs or ignition coils.

[@ketutwiadnyana2610]

Thank you for the video!

[@Soulseeker826]

Very descriptive video, great work? Do you have the part 2 video?

[@ERICSDIYGARAGE]

Yes the parts should be listed on the kia sorento Playlist

[@PotatoeChipz]

Any idea where the original ground from the block to chassis goes? This 2 part series is amazing.

[@ERICSDIYGARAGE]

thank you for watching! unfortunately I dont have that information

[@livenfree]

Can you make a list in description of all the parts we should buy for this job? Wondering if I need to buy knew intake gaskets?

[@ERICSDIYGARAGE]

I would recommend replacing the rear heater hoses, pcv vavle, spark plugs and valve cover gaskets. I did not Replace any of the intake gaskets they are made out of metal so I re-used my old ones and so far no issues. I would also change the factory clamps and use the screw type. Other than that just Replace the coolant that was lost.

[@Dhi-fe5eu]

I would love to know the Moron who designed this motor. Taking all the wiper assembly to replace the spark plugs is unbelievable. Great video.

[@ERICSDIYGARAGE]

If your just replacing the spark plugs you only need to disconnect your throttle body but I also did the valve covers and for that you do need to remove the wipers assembly

[@njiodjipaudrey8599]

Great work... thank you so much. Great mrchanics

[@msheplervideo]

very helpful and filmed fantastic!

[@ERICSDIYGARAGE]

+Mike Shepler thank you !

[@TheGuzman2001]

ERICSDIYGARAGE I have a question, what should I do if a piece of hose got inside one of the 6 openings after removing the exhaust manifold ?

[@ERICSDIYGARAGE]

you should try to remove it , it can cause engine damage.

[@TheGuzman2001]

ERICSDIYGARAGE what's inside those 6 holes ?

[@ERICSDIYGARAGE]

TheGuzman2001 it leads to the combustion chamber.

[@vicenteherrera2070]

I need some help, so I did everything as u said, 1 with 4, 3 with 6 and 5 with 2 guess what I had engine misfired all the cylinders now I don't know what to do, can u help me out please, is 2005 kia sorento lx the cables are 3 diferesnts sizes S, M and L in which order they go. Please I really need some help, thank you.

[@ERICSDIYGARAGE]

you need to move the cables around look up on google the wire diagram and move the cable to the appropriate coil pack it should fix your problem

[@contraband1543]

I did this job and inexplicably the fcking timing belt jumped time after putting it all back together. Kias a fcking garbage that all belong shot into space

[@paulstreetman841]

Do you have a video of replacing the valve cover gaskets on a 2007 KIA Sorento which as I understand is a little different than the 2006? Thank you in advance.

[@DreviousKing92]

So would you have to remove all that just to get to the coils on the driver side?

[@ERICSDIYGARAGE]

no in this video I was replacing the spark plugs and valve cover gaskets. Look through my videos I have one show me how to replace the wires

[@DreviousKing92]

@@ERICSDIYGARAGE ok cause i have a miss fire from 1/4 which is the same coil

[@iancorkhill7689]

great series. I have done this job recently due to misfire on #6. Have you ever removed the top head as I now find I have to look at the exhaust valves.

[@ERICSDIYGARAGE]

+Ian Corkhill Thanks for your feedback and unfortunately i have not done that on this car.

[@barrymedeiros9391]

Any videos 2005 Kia Sorento fuel filler neck vent hose replacement how to?

[@sca4380]

I wonder why Kia went with this design? It's really complicated (more than most vehicles) just to change spark plugs. Thanks for the video though but I think I will take it to professionals. I'm to afraid of loosing parts.

[@ERICSDIYGARAGE]

It is a big job but it your patient and take your time you can do it as well just like how I did.

[@super20dan]

this is a mitshitibshi engine. kia didn't have anything to go in the first gen sorento so they used this pos engine desighn. its a steaming pile

[@KrisKYL]

@@super20dan i agree. Im just gonna change 3 spark plugs on left side engine. I dont wanna pay someone hundreds of dollars for a spark plug job. And i dont like working on cars either. My sorento is a piece of shyt anyway, i really dont care if its breaks down on me. Its only worth 1000 anyway at tops.

[@super20dan]

@@KrisKYL this engine insanely complex. I had to think long and hard about buy this car. my valve covers leak badly.

[@super20dan]

@@KrisKYL my valve covers leak badly. refuse to pay 500$ for gasket replacement. I just keep adding oil. mine is in execellent condition and was well cared for. too bad its got this pos engine. love the car otherwise.

[@Noises]

Drinking game! Every time he says "go ahead and," do a shot. (dies of alcohol poisoning three minutes into the video)

[@rickkloog8973]

Ha! I was just thinking the exact same thing, you would be shitfaced in the first two minutes. I was going to count the times he says it but thought I don’t have that much sanity to focus on such a banal thing. I do for the love of Christ’s nipples hope he reads his comments and tries to quell saying it because if we’re noticing, imagine the people close to him. It could ultimately be a grounds for divorce for some people. He seems like a super solid dude, with a truly crazy making tick.

[@earljohnson53]

I need your help please I have a 2005 Kia Sorento I'm doing a head job on I need to find out the firing order how to time the engine and the torque settings for the heads

[@zayharris7412]

You did a lot of extra work for no reason

[@ERICSDIYGARAGE]

Please explain why you think that

[@alvaroferrufino534]

If is to change the value cover gasket him has to remove all that parts..i have the experience in my Kia Sorento.

[@anthonyhayden320]

Hi. Did you have an issue with engine oil leaking onto the exhaust manifold, causing a burning smell?

[@ERICSDIYGARAGE]

no i did not it was only leaking a small amount.

[@anthonyhayden320]

No worries, I think mine is leaking enough to get onto the manifold. Your video has been a great aid :-)

[@ERICSDIYGARAGE]

thank you i appreciate it!

[@adrianparada5950]

hey bro great video, one question i have an injector stuck open so bought all six of them, if im correct the fuel rail sits under the intake manifold? do i have to remove the intake manifold as well for injectors to be change? once again best video on kia sorento valve cover chance i've seen..

[@ERICSDIYGARAGE]

+Adrian Parada thanks bro I appreciate, and yes you need to remove the intake manifold to get the the injector, they run along the side of the valve cover.

[@HENNERMCLEAN]

The conector that you disconnect at minutes 12:20 what that for, bcz I have a Kia Sorento 2004 but I found the male connector loosening fin the harness I don’t know where it needs to be connected

[@flytechbass1979]

On a 1970 Chevy 454 16 screws 10 min job. KIA engineers drop the ball on this one

[@iwanhokahin3476]

Any chance you can fly down to the Caribbean and work on my 2006 kia sorento? All expenses paid

[@bobceffo]

15:50 the connection that you are removing looks different on my car. it's 2004 3.5 v6 4WD on my car that small cable tree goes all the way down to the gearbox. In order to do this job you will need to trace the cable, release a couple of fasteners, release the 3 (if I remember well) plugs from underneat In other words: to to this job you NEED to be ready to put the car on stand/ramp/lift/something...

[@ERICSDIYGARAGE]

That interesting this was a 2003 4wd so it should be the same, but maybe things changed in 2004

[@bobceffo]

@@ERICSDIYGARAGE I think Kia likes to give us some challanges :)

[@xSyN1sTeRx]

go ahead, go ahead, go ahead, go ahead, go ahead, go ahead, go ahead, go ahead, go ahead, go ahead

[@alyssatellez9743]

I had the same engine misfire code show up for my 2004 Kia sorento. Would I be able to just replace the engine coil instead of all the spark plugs?

[@ERICSDIYGARAGE]

this vehicle has a coil/spark plug wire designed so 3 coils and 3 spark plug wire, you can move the coils around and see if the problem follows if not it's your spark plugs that need replacing. If you need to replace the spark plugs watch this video where I should you how to replace just the spark plugs kzbin.info/www/bejne/joOVp4hpgLN6r9U

[@eltigre2367]

Where can I buy the best valve covers gaskets? I don’t want to do all the work and still get a leak.

[@ERICSDIYGARAGE]

I would go with OEM so the dealership is the place to go for the parts

[@eltigre2367]

ERICSDIYGARAGE is fel-pro a good Quality product? I’m selling the car, and I don’t want the next owner to have the same problem.

[@ERICSDIYGARAGE]

@@eltigre2367 its second to OEM in my opinion its a solid alternative

[@eltigre2367]

Do I have to torque them ? I can’t find torque ratchet that lil bit

[@ERICSDIYGARAGE]

I Recommend torquing them down

[@GameWorks12]

About to do this. Scared imma fuck everything up but 🤷🏽‍♂️

[@richardm2566]

Would be nice to have the links to vids 2 and 3, or am I just over looking them?

[@ERICSDIYGARAGE]

Here you go kzbin.info/www/bejne/bl7LZZSfaKlkp8U

[@DamagedDingo]

I’m getting P0350 “ignition coil primary/secondary circuit “ and P0300 “Random/multiple cylinder misfire detected “ I have a misfire/ignition control module on order (thing your removing at 12:00) as this seems to be a common sensor to fail, but now with the misfires I’m wondering if the coils or leads might have to replaced. Does anyone know the cause of these codes? I had it in to the mechanic and he blamed E10 and changed the plugs but $600 later I had check engine light on 10sec after leaving. I’m just not positive on leads or coils as it is misfiring on all cylinders. I should also mention when the misfires happens the tacho stops working, as soon as the tacho starts working again the engine runs fine. Seems to work ok on first start in morning but after about 10-15min I get tacho/misfires.. any help appreciated.

[@joshuamorganii7694]

Anyone else thinking about how there just trying to change spark plugs, not a whole ass motor?

[@mikhailvershinin2292]

I did this job on a xg350 Hyundai with the same engine can’t be harder than that😅😅

[@bennettshfd2]

I see a free Harbor Freight Screwdriver!

[@Brown-streak_studios]

i get the feeling i'm not going to be able to be able to do this by my self and i will need to just leave it to the repair shop.

[@mikhailvershinin2292]

It’s not that bad

[@Brown-streak_studios]

@@mikhailvershinin2292 it was that bad, the engine locked up and i had to scrap it

[@35bigbri]

Wow all this just to do a rocket cover! And plugs I was going to swap for one of them and it has a slight leak from the cover! Hmmm

[@mariaestelafloresquintanil692]

Muy informativo quisiera que suba in video de como cambiar el enfriador de aceite de una kia sorento 2006 3.5

[@ERICSDIYGARAGE]

Thank you so much for watching here is part 2 kzbin.info/www/bejne/bl7LZZSfaKlkp8U

[@johnmiller623]

Will this fix missfire if i change the plugs .?

[@ocesmekanics3831]

Yes it most certainly will.

[@johnmiller623]

@@ocesmekanics3831 And another thing my car will crank but wont fire what could be the issue iv put a obd on it i got codes of miss fire and low fuel pressure

[@ocesmekanics3831]

Low fuel pressure usually has to do with a bad fuel pump or bad fuel pressure regulator. The fuel pump is the first to go bad rather than the regulator especially if you let your gas tank more than 1/4 empty before refueling. I will start checking there

[@johnmiller623]

@@ocesmekanics3831 put new fuel pump in still nothing should i need to put more fuel in the tank ?

[@ocesmekanics3831]

If a new fuel pump was installed, then you need to install new spark plugs to see if that is the problem. Also check the spark coils to see if they are working properly. They need to be at a certain voltage to function as they are supposed to. Misfire includes a bad spark plug or faulty ignition coil

[@jrgene16]

did I hear 238,000 miles? is that correct thanks

[@ERICSDIYGARAGE]

Felix Ebilane yes that is correct

[@jrgene16]

wow pretty good for sorento. may i ask question. do you think what is the problem with my 03 sorento. it starts 1 click during cold but during warm and after resting for couple of minutes. it doesnt start easily it cranks longer before it starts. thank you for the answer

[@ERICSDIYGARAGE]

+Felix Ebilane it could be alot of things or it can just be a normal thing. My kia does the same thing i have cleaned the mass air flow sensor and replaced the coolant temperature sensor, changed the spark plugs but i have yet to figure out what the issue is. i have read the when the starter is going out it acts up when its hot so maybe the starter is getting worn out making the car crank longer. sorry i couldn't help much

[@yawasap5110]

Felix Ebilane there is a actuator on the lower half on the intake with the butterfly valve they go bad and make noise and they had a recall to change the butterfly screws which can come lose and rattle down and can can running issue and the crank pulley bolt breaks alot and if the tech cant extract it you will need a short block

[@ERICSDIYGARAGE]

gearhead gearheadi heard about the crankshaft bolt but not the butterfly bolts thank you for that info 👍

[@TyroneJackson-dl6wm]

Well I guess it's going to the shop.

[@joeplanter7959]

Anyone know if this is the same process for an ‘08? I know it’s a first gen as well but the engines are different. I know mine looks different than this engine. I have the 3.3 liter.

[@randybaylor9431]

joe planter do you have the twisted sideways engine

[@ERICSDIYGARAGE]

Unfortunately i wouldnt know but it might be similar if its a v6

[@alexandercornejo7274]

Gracias a tu video encontre donde iva una lata jajjajjaj

[@hazleborn]

How to change spark plugs on a Kia Sorento 05' step one: remove the hood. 😟

[@brianjones2070]

You forgot the bracket in the back right next to the ground wire on the intake

[@julieburdge79]

what is the labor time?

[@ERICSDIYGARAGE]

This took me 3 days with me filming but without I'm sure its about 8 hours or less

[@charliecamilleri1162]

20 minutes into video...is there a spark plug removel come soon...oh my god...

[@murderbirdLTX]

Dude your never going to make it in a flat-rate shop with all that unnecessary disassembly for nothing

[@JoseMedina-rb2xg]

Where’s part 2

[@ERICSDIYGARAGE]

Look at my Playlist it should have it there under Kia sorento

[@rickkloog8973]

Thank you for the video, it was helpful, but for the love of all that is holy please stop saying “go ahead and” it’s maddening when it’s overused. Thank you in advance for internally processing this and externally minimizing it.

[@nick84able]

Looks like a bit much just to change the plugs

[@ЮрійПідлубний-м7ъ]

A czy mogę prosić o tłumaczenie na polski lub ukraiński,?

[@earljohnson53]

Hello

[@earljohnson53]

Can anyone help me

[@sandyhendrickson2033]

I would never buy a Kia again,unbelievable to change plugs...pos