2003 Chevy Silverado Blower Motor Resistor Replacement!

[@anthonyjaime3094]

Thank you homie this was a grand help i didnnt even know i had a problem brewing till my whole ac stopped completely and you came in clutch

[@homefarmideas]

Bars! Happy to help bro 😎 👍🏼

[@MyLifeThai371]

I did the permanent fix for it my blower motor turning off and on intermmitently on my 2003 Silverado. I bought an "add a circuit." I bought the 30 amp one. I pulled the 30 amp fuse out in the cab for the heater/AC hvac system and plugged in the add a circuit that has 2, 30 amp fuses in it with a pig tail coming out of it. I connected 8 ft of 14 gauge electrical wire to it with a butt connector. I ran the other end to the blower motor on the passenger side of the cab. I cut the pig tail off of the blower motor(the blower motor just has 2 wires coming out of it. A red and a black wire. I connected it to the red wire. The black wire on the blower motor I connected an eyelet to it and connected it to one of the glove box hinge screws which was a good ground. I cut the 8 ft piece of wire right above the transfer case shifter and installed a toggle switch from walmart. Now I can turn my blower motor off and on with that toggle switch. I only have high fan speed, but I don't care.

[@Darstout]

I like the way that you laid out the procedure. I followed it easily. Thank you.

[@Scott_Thrasher]

was going to use your link but its no good anymore

[@outfitsgarage88]

Good info. I'm going to be doing this to my 05 Silverado to

[@chrismaster2410]

I still didn't hear three 🤔

[@everetteroberts9547]

Me neither

[@Vermeer604msuper]

Same here

[@voorhis5]

9/32 is the same as 7mm if I remember correctly so if people don't have a 9/32 you can use a 7mm

[@voorhis5]

And 7/32 I'm pretty sure is the same as 6mm

[@glennhaukedahl1085]

Thanks for your information on how to! Replace Blower Motor! Plus like your Cassette tape Player. To Vs Sirius XM Radio!

[@signshoppe540]

works and saved a lot of time and money!

[@mandy32171]

I'm having a really hard time getting the back plug in. Any tips? Please and thank you. Frying in Louisiana

[@Luw912]

Thanks man I finally fixed it!

[@Dan-ln8el]

Great instructions! except for one thing... don't leave the blower cover on like he did. (I know he says you can remove but he opted to leave his on) I tried to it leave on like him and gave up after a while. The cover is only for screws that are easy to get to and then its MUCH easier to access after its removal.

[@xvrit]

Thank you brother. Appreciate you.

[@AD-nn7vh]

I have a 2003 silverado basic 4.8 eng and there is a extra mounting bracket. Have you seen or heard of this and what might be the part number. Gone through two parts and neither fit.

[@5.0jeffro79]

I have the same problem. Did you figure it out?

[@houstonporteous3763]

What do u mean I know mine has rear vents and manual controls so I can't find my resistor but? Extra bracket where?

[@ignaciolopez8221]

Thank Señor.

[@Theoobi]

Very helpful thanks thanks thanks

[@mikerob2767]

Nice music

[@freddycansino3440]

Mine is nowhere near as easy to remove.I have a 2003 Silverado LS with a 5.3 and it doesn’t look like this.

[@thayerm1]

Background music is not necessary. Does not add value. It is an annoyance.

[@Anactualrealperson]

That’s a 4.8

[@brianbraunschweig4645]

so where is the part number/??????????

[@stevelord8697]

Music does not help.

[@jackizenbart7745]

Dealer just charged me 850$ for this fix…