You keep finding at of these cherry hardly ridden stock bikes I HATE YOU lol. Makes life a whole lot easier.
@stihlms Жыл бұрын
Nothing beats oem plastic. We try to use oem everything on our bikes.
@Jamo29 Жыл бұрын
Legit talent right there!! Bike looks amazing, super clean 👌🏻 Love the cookie cutter Factory Yamaha look of yesteryear mixed with trick parts 😍
@MANBEARPIG111 Жыл бұрын
I have a super clean 04 yz250 i cant wait to build it out a little more.
@MotoScrub Жыл бұрын
Thats awesome, make sure to share so we can all see! 😁
@rickystephens7253 Жыл бұрын
All around awesome job bro!💯
@TWITCH7724 ай бұрын
Hi, I am amazed at the results you get in the parts washer. Looks as good as ultrasonic cleaner. Do you have a solvent you recommend?
@andymclain2574 Жыл бұрын
Dayum! U gotta do this to my 1994 Cr250🤘 badly
@73rlight Жыл бұрын
Great videos! Please keep them coming.
@AbcAbc-ox6pg Жыл бұрын
I have the same bike, I restored it to 100% OEM new condition, it took me one year of work.
@MotoScrub Жыл бұрын
That's awesome, lets see it!! I'm sure everyone would enjoy looking at a nice OEM build 😁
@Thepianobird Жыл бұрын
I have to say you have a nice taste in mods. Especially the Race Tech gold valves and PC head work.... The only thing I might have done more is some gear micro polishing and cryo treating. And some Ti hardware, but it looks like you might have some already.
@nickwukmir9853 Жыл бұрын
Last of the good frames.
@Goffens5 ай бұрын
Great build but were can i get my hands on GYTR top triple clamp for my 2004 do you have a part number?
@dustinrichards8401 Жыл бұрын
Clean!!
@zsoltpolgar5867 Жыл бұрын
Nice job...
@MotoScrub Жыл бұрын
Thanks!
@juicedelco Жыл бұрын
What's the ball park on somthing like this?
@Thepianobird9 ай бұрын
you can build that bike for 4 or 5 grand. Im doing one right now. I got about 35 sank into it.
@Logan-tf6nk Жыл бұрын
Sweet build! I'm curious how you do these types of builds all the time. Are these for yourself or customers. Keep up the good work!
@MotoScrub Жыл бұрын
Thanks! They are customers bikes besides the 2006 RM125 an 2004 KX125 ^^
@DanielRuiz-cr6gq3 ай бұрын
Buena reconstrucción pero la has desgraciado quitandole el manillar original una pena...
@StringTone-t6v10 ай бұрын
Eliyte Indonesia ra mikir wong lugu lugu Indonesia dilibatke utekke ...oas kui elite utekke mbok kei senjata oersng karo irael cino pas podo ngeyel e soal e
@msoto951Ай бұрын
Did Pro Circuit re plate the cylinder for you?
@joaopaulocordeiro6954 Жыл бұрын
Befora was a museum/ colection pieace
@leandromilanezsoares2798 Жыл бұрын
Muito top ai sim parabéns
@leandromilanezsoares2798 Жыл бұрын
Muito top ai sim parabéns
@justinkimball1399 Жыл бұрын
is it for sale and if so how much
@ishy54625 ай бұрын
What foot pegs were the new ones?
@dougbotha87684 ай бұрын
Good looking bike.
@TheSlim93gt9 ай бұрын
Im glad to see a Chad Reed replica. Tired of all the cookie cutter McGrath look a likes. I've always wanted to do a Doug Henry works 4 stroke (white plastic, red graphics, AL tank) but with a 2 stroke. Kind of a middle finger to what that bike started.
@whiteman3075 Жыл бұрын
Ryan’s bikes are coming out sweet! I just bought a pro circuit 250 top end off him today.He told me about this channel and I’m now binging on these builds. Most people don’t realize the man hours this takes. Iv done my own and can tell you it’s cheaper to buy a new bike a most causes but the labor of love is what you do it for. Keep up the great videos Johnny.
@TNTMOTO Жыл бұрын
Nice build. Very clean look.
@positivecarry07 Жыл бұрын
Yo Moto Scrub - Maybe you can ask your followers if they have a 98 or 99 YZ250 for sale? I’d love to see a McGrath tribute.
@johnbecker521311 ай бұрын
this makes me think about how much better Mcgrath is than reed.
@MotoScrub10 ай бұрын
Thanks! ❤️
@robertwaynereoo3636 Жыл бұрын
If you don’t mind me asking mate, what jetting specs do you have? And how many turns out is your airfuel screw? Plz
@MotoScrub Жыл бұрын
Used the jetting specs directly from Pro Circuits website. Main 175 Pilot 48 Stock Needle (N3EJ) Needle Position 2 Air Screw 1 Good luck! 🤘🏻
@robertwaynereoo3636 Жыл бұрын
@@MotoScrub cheers mate thank you so much do you mind if I asked what fuel ratio you running it at? Please
@zachliter619 Жыл бұрын
You make me want to learn more on suspension work. It one of my least favorite things to during my builds.
@badboycash1 Жыл бұрын
You started with a super clean bike to start with out of someone's collection no doubt nice build tho you finished it well
@juicedelco Жыл бұрын
What ratio did you run? Looked really lean, unless it wasn't 5gal.
@Haljo Жыл бұрын
Where did you learn all this? Dude you are amazing!!
@birel_dd2 Жыл бұрын
Top work Scrub 👌👏💎
@GavinBose Жыл бұрын
Where did you get your subframe bolts?
@MotoScrub Жыл бұрын
The top portion of subframe is the OEM bolt. The two lower bolts are from "Bolt Hardware". 👍🏻
@GavinBose Жыл бұрын
@@MotoScrub thank you
@rclmxshift Жыл бұрын
When you add the gold valve to the rear shock, are you shimming it to the stock spec? Bike turned out sick looking.
@MotoScrub Жыл бұрын
Both the fork and shock were revalved while installing the Gold Valves 👍🏻
@bump2007 Жыл бұрын
Nice build. Where did you get the fork guards? I ordered a set from them over a year ago and still havent received them.
@MotoScrub Жыл бұрын
All the parts were given to me by the customer but I believe they were purchased directly from Lightspeed...
@cristinegutierrez9893 Жыл бұрын
Want that so bad 😭😭
@ankrapek1211 ай бұрын
you dude deserve more recognition, keep it up, people will eventualy share your amazing work!
@MotoScrub11 ай бұрын
Thank you!
@mikedillon3119 Жыл бұрын
very classy and period correct looking refresh nice 👍🏿
@MotoScrub Жыл бұрын
Appreciate that! That era was too good looking to mess with it 👍🏻🤘🏻
@pedrofernando176 Жыл бұрын
✌👍🤙
@MotoScrub Жыл бұрын
✌🏻🤙🏻
@zoulou6700 Жыл бұрын
Good evening ! great video ! where did you buy the frame protectors and the carburettor hoses please?
@MotoScrub Жыл бұрын
Frame protector - 3M brand, 4inch grey grip tape, purchased in big rolls. Then custom cut. Honda hoses - part number: 95003-07008-60M Good Luck! 👊🏻
@bielbills Жыл бұрын
Outstanding work! What a beauty!!! You need an Andreani vacuum suspension pump to proper bleed the air from the rear shock to avoid hydraulic cavitation.