2005-2009 ford mustang transmission removal. (Easy way)

Any question leave in the comments. And don’t forget to subscribe thank you. 😀😀🙏

[@Santiknws23]

Great video! I’ve watched a bunch, and this one of the most informative. I’m so happy I don’t have to remove the exhaust.

[@1Wayfix]

Thank you. Any question leave here i will do my best to help 😀😀😀

[@JoshWellborn]

Pro tips included… This was VERY helpful! I removed my transmission following your instructions… it only took me two days! Haha! I’m glad I didn’t remove the exhaust. Pro tip 1: I did, however, have to remove the transmission pan to remove the mount (mine was slightly larger than the one in your video.) I had to put the pan back on to put the jack in place. Pro tip 2: Also, I removed the entire drive shaft, so I could get my head up there to see the mounting bolts on the top.

[@1Wayfix]

😅💪💪I glad this video help. You. 2 days 😅😅. But probably not all day long working on it. Don’t forget to replace the transmission filter then. And put the right amount of fluid. Any question leave here I will do my best to help 😀😀😀😀

[@Frugleclock]

I’m 12 min into the video gonna finish the rest tomorrow thanks bro much love ❤

[@1Wayfix]

@@Frugleclock ur welcome. Thank you for you comment 😃😃😃

[@Anthony11qq]

Great job. Thanks for making this video

[@1Wayfix]

Any time anthony. Any question leave here. I will do my best. To help. 😃😃😃😃

[@sinsix4408]

THANKS DUDE HELPED ME OUT ALOT

[@1Wayfix]

Any time. If you got any question leave here in the comments I will do my best to help 😊😊.

[@Quenton-nc8kj]

Thank you my guy.. you the man!!!!!

[@1Wayfix]

Thank you. Any time. Just. Leave any question here. I will do my best to help. U. 😀

[@MrHerrjon]

Great video, great detail. Thank you!

[@1Wayfix]

Thank you for you comment .any question leave here. I will do my best to help. U. 😀

[@YbcTayda1]

Great video bro thanks

[@1Wayfix]

Thank you. Any question. Leave here. For any type of car. Or truck. Bikes. Anything that use fuel 😃. Ill do my best to help.

[@adamboone6864]

You removed your transmission with one hand 😂😂. That’s freaking awesome.

[@1Wayfix]

😁 you just have to get you jack on the right spot

[@Hectorreyesgarcia]

Eres mi idolo canijo

[@1Wayfix]

😂. Ni pa tanto. Gracias. Saludos. 😃

[@user-ni4mq4hi1d]

what can i do the flywheel don't turn to remove the 4 bolts and the shift is on neutral from under the car 07 mustang and need to remove motor any tips?

[@1Wayfix]

Well the only option will be. To lose the transmission. And pull the transmission back. That way the torque converter. Will stay stick to the flywheel. Then you can pull out the engine. And. Then you can figure it out to remove the bolts. Outside. ➡️➡️ let me know if you got another question 😀

[@JoshWellborn]

I’ve rebuilt my 5R55S. How do I align the torque converter to re-install? I marked the last stud and corresponding hole on the flex plate… Do I simply align that stud with its corresponding hole?

[@1Wayfix]

Yes. But. Check when you have the transmission housing. Close to the engine to Make-sure Its going in the right direction. Just make sure the torque converter don’t slide out.

[@JoshWellborn]

How do I make sure the torque converter is in all the way? I’m told there should be 3 “clunks”, but I only hear 2 clunk sounds.

[@1Wayfix]

@@JoshWellborn try a couple times. But the only way. To know Is if you cont not. Slide u finger. To the back.

[@MrHerrjon]

Oh hey, what about the diagnosis? What codes or lack of codes? Thanks!

[@1Wayfix]

No codes on this one.

[@guajardo172]

What size jack stands did you use?

[@1Wayfix]

I used the 6ton. Stands. 😀

[@Ravichauhan0807]

Bro i have questions for 5r55s mustang 2008 v6. Previously this car shifting funny. I change fluid and both od and intermediate servo. Now m facing a complete gear lose no d no r but move in d3.d2.d1. And some time move in D.

[@1Wayfix]

Any codes ?

[@Ravichauhan0807]

No codes but od light flashing

[@1Wayfix]

@@Ravichauhan0807 well at this point what you can do is open you transmission pan. And check for anything. Laying on it. Like something broken.

[@Ravichauhan0807]

@@1Wayfix thanks for your replay but i swapped it for a used one and my original tranny has servo bore issue.

[@Titanic19127]

That was fast

[@1Wayfix]

I did around 8 Already. Thats why. Don’t take me too long. 😅

[@Titanic19127]

@@1Wayfix If I ever needed it replaced I would pay you for sure!

[@mariogrado9155]

Bro, do you where output speed sensor is ?

[@1Wayfix]

Should be input and out put. Speed sensor. Let me check the diagram. What year is yours ?

[@LaheyJimm]

Should’ve made an installation video!

[@1Wayfix]

You right. But most the time is in reverse order. Thank you for you comment. If you have any questions leave here. I will help you. 😀

[@LaheyJimm]

@@1Wayfix do you mind listening it in order for me please I had someone take it off but I’m struggling with putting it on

[@1Wayfix]

@@LaheyJimm what i can do is. Get you the video in reverse order. So you can watch. That way. Let me know.

[@LaheyJimm]

Will a 05 v6 tranny fit an 08 v6?

[@1Wayfix]

Should be the same Just check the Identification number on you transmission. To Match them. 5r55s. Should. Be the number.

[@MariaRivera-ck2tj]

Hey I swap my transmission but torque converter wont spin look like it stuck trying to re install the nut

[@1Wayfix]

You have to be careful. Because you have to alignment. The torque converter. Stud. With the flywheel holes.

[@1Wayfix]

Back it up. A little bit. Then. Put. One of the holes. Of the flywheel. At 6 a clock. And do the same. With the stud of the torque converter. Both at 6 a clock. Then bring it both together.

[@MariaRivera-ck2tj]

Ok thank I’m try so …other problem I got is that drive shaft is to short now does that mean I got to get a new drive shaft

[@MariaRivera-ck2tj]

@@1Wayfixother problem I have the drive shaft is to short now

[@1Wayfix]

@@MariaRivera-ck2tj did you get the same transmission

[@user-fu4fo5ro1l]

Is this the same process for a 4.6?

[@1Wayfix]

Should be all most the same .you can follow. This video to guide you. If you have any question i will do my best to help. 😃

[@user-fu4fo5ro1l]

Thanks

[@leoFive789]

Seeing this video because I don’t know if I should get my transmission worked on, or just replace it completely :/. I got the diagnosis and the mechanic said I needed new solenoid blocks, and service, he was charging me 900$ my transmission would slip going into 2nd, or start at second. The car ran fine when I took it to the mechanic, but I used it to get to work, and when I got home I could hear a whining noise, sounds like if I have a supercharger so I don’t know if the transmission is now beyond saving, or if I should take it to the mechanic, thanks! What would you recommended?

[@1Wayfix]

Can you record a video. Of the noise and send it to me. Find me on Facebook. …Colas solorzano ….

[@1Wayfix]

Can you send me the codes. List. Too

[@leoFive789]

@@1Wayfix damn, forgot to memorize the codes, probably nothing much you can help with without them huh? Just stuck on fixing it, or completely replacing the trans

[@1Wayfix]

@@leoFive789 where you located ?

[@leoFive789]

@@1Wayfix Ventura cali, but I have one more question, I got it scanned and the guy who did it is a mechanic and said the second solenoid was fcked along w other things, he said he has to get a full solenoid pack for all gears, bc mustangs only have that option, for that he’s charging 350+ labor, and then he said to “service” the transmission is gonna be like another 500, so in total he said 900, is he charging me right? Or too much? Or what do you think bro

[@CocinandoFinanzas]

Do I have to drain the oil if I'm just trying to lower so I can get to the back of the engine?

[@1Wayfix]

You trying to remove the transmission ?

[@CocinandoFinanzas]

@@1Wayfix I need to replace the timing belt chain cassette but I dont want to mess with taking out the engine so doing some research I found out that if I take out the transmission I can get to the back engine bolt to release the broken cassette

[@1Wayfix]

@@CocinandoFinanzas i got. You. Well You can. Drop the transmission. And just drain the fluid And. Save. It. To. Get it back. In to it. Because. It will drop fluid from the tail. When you get it out. But. If you drain what is in the pan. I dont think. It will drain.

[@RobertYayo]

Do I have to make any markings?

[@1Wayfix]

What do you mean markings? Can you explain please. 😅

[@RobertYayo]

@@1Wayfix someone said to mark the torque converter and flywheel

[@1Wayfix]

@@RobertYayo no you dont need to do that Just make sure when you. Putting everything back. Align you torque converter with the flywheel holes. So you can slide. De torque converter. Right on Each hole. If you dont so that. The studs. On the torque converter will push the flywheel. And it can brake it. I hope i is explained the way you can understand me. Any question leave here. I will do my best to help. 😀😀

[@RobertYayo]

@@1Wayfix i understand thank you

[@theogoosby7035]

2006 4.6 Automatic transmission problems no codes not going in drive or reverse

[@1Wayfix]

Im thinking. The transmission is damaged already

[@1Wayfix]

Check for transmission leaks. If no leaks. Lift the car. Put some stands. Under. Start the car. But. Make look level front and back. Remove de volt Under the transmission pan. Then should. Start dripping. Fluid. Out. If not. The transmission is bad. Because the pump. Has no pressure. To move the fluid

[@theogoosby7035]

@1Wayfix ok thanks

[@1Wayfix]

@@theogoosby7035 any question. Leave here. I will do my best. To help. 😀💪💪

[@GrumpySteve]

Hi great video, this is a 4l 6cyl, easier than GT, right? How high did you lift the front? I have 1 2 3 gears but no drive or reverse, what do you think? Mine is a 2010 but looks the same.

[@amin0358]

I put the mustang on neutral and the drive shaft would not move at all

[@1Wayfix]

E brake on ?

[@1Wayfix]

You going to remove the transmission?

[@amin0358]

@@1Wayfix e brake is not on and im removing the trans

[@1Wayfix]

@@amin0358 probable the band. Broke. And is stuck in there. And wont let the shaft to move. Make sure is not in gear. Try to spin the tires.

[@amin0358]

@@1Wayfixi got it off now, i dropped a socket in the fly wheel and i now cannot spin it down but i can spin it upwards