Nice breakdown off the truck. Gotta like those steel workbenches too.
@YourAwesomePhoto5 жыл бұрын
Great video on this teardown there are so many terrible videos of people that don't know what they're doing.
@StephenWhiting-WI Жыл бұрын
A great video! most important point is you need the proper long reach snap ring tool, if you don't have it don't do it, you will have a bad day. Knipex makes a good one.
@bitabur Жыл бұрын
Knipex 4611A3 works great!
@isaacgraham72614 жыл бұрын
Nice video. Obviously knows what he's doing. Thanks for a useful video!
@cecogeko192 жыл бұрын
good finformation here. lead tech here. havent had enough experience with acle seals and bearings on the dana 60 front. alldata states its nonserviceable. in translation is it is my job to service., & i am own my own. -jesse
@travissk50363 жыл бұрын
Great Content.
@randycordes4643 жыл бұрын
Great video
@mickle700 Жыл бұрын
Thanks mate
@brodycrcs4 жыл бұрын
what is the part name of what comes next if you keep going farther? would love a full breakdown
@Dwolfson224 жыл бұрын
Awesome video. I need to replace ball joints... thus the knuckle needs to come off. do I need to replace the axle seals if I do that? They work fine and we’re replaced recently.
@VenturesTruckParts Жыл бұрын
Here is our video for earlier trucks. but the concept is the same. kzbin.info/www/bejne/nGKleGpmi7CFhsk
@RL694204 жыл бұрын
On my 2010 F250 the left side c clip that you have to remove after taking of the locking hub is broken. Do you have any suggestions on how to remove it? I’ve tried using screwdrivers but that thing has a lot of tension on it. Any idea is helpful.
@rickparry91512 жыл бұрын
What snap ring pliers are those?
@THRASHER19904 жыл бұрын
Couldn’t you leave the hub on the axle shaft and remove them both at the same time?
@chrisnolt2963 Жыл бұрын
Hi loved your video... Can you take the axle housing apart?
@environmentlandscapeexcavation3 жыл бұрын
amazing video brotha!!!!
@AquaticLogic4 жыл бұрын
Thanks so much for this. Super helpful!
@robertphillips46164 жыл бұрын
How do you get the radius arm bushings out of the axle?
@СолнечныйЧеловек-ъ4ц5 жыл бұрын
Hello, wonderful man. Please tell me the weight of this bridge. Can not find. Thank good luck
@VenturesTruckParts5 жыл бұрын
I do not know what you mean by bridge....
@CodyDoesIt4 жыл бұрын
@@VenturesTruckParts? I am lost
@MountainPF3 жыл бұрын
In Russian, axle is translated to bridge.
@VenturesTruckParts Жыл бұрын
I am sorry i do not know the exact weight. ball park i would guess is between 500 and 600 pounds
@rolandbenko4 жыл бұрын
Would you have the part numbers for those seals ?
@VenturesTruckParts Жыл бұрын
Please see the video description for a link to all of the seals in this video.
@scottb.innovations43864 жыл бұрын
it would be easier to use a center punch on the hub bolts
@rsguitar212 жыл бұрын
The only thing I could see wrong was the last 3 items left on the table u didn’t show on the axel itself where it would sit
@VenturesTruckParts Жыл бұрын
Please see the video link in this comment for that information.kzbin.info/www/bejne/q4fQhICdfrmfq8U