2005 Mazda 3 - 2.3L CAR WON'T START!! Code P0340 Problem Fixed!!!

[@benazirsalinas9959]

You help me a Lot, thank you so much 😂 !!!!!!

[@miguelaguas8699]

wasn't my problem but your description of the diagnostic gave me some great ideas of things to check

[@gqautodiagnostics]

Thank you for the comment. Please keep me posted and God bless you

[@gastonkamba3760]

I had a similar problem I ended up changing the entire camshaft, though it took me weeks to discover.thanks

[@kaskahea1274]

mahalo for sharing this 👌🏽 helpful to rule out if it’s fuse, or relay ‘cause my battery I installed new.

[@lawrencesanchez8904]

Thanks! Great video.

[@akaitv6606]

Excellent work mate , I wonder how many deg of tolerance there is .

[@EdwinGarcia-bx3ip]

Bro thanks for the tip it work in mazda 3 i can thank u enough thanks a lot

[@gqautodiagnostics]

I am glad to hear that the video helped you!

[@dwej9080]

You could have drilled hole between that ring into the cam end and put in a basic spring pin to keep it from rotating again.

[@gqautodiagnostics]

Hello. Thank you for posting your comment. Yes, you are correct. How ever it would be very difficult to get the exact timing so I ended up replacing the camshaft. Have a great day and God bless you 🙏

[@lovemoremasere7355]

So helpful

[@OmarGarciaElDeLa_O]

Wow, very interesting. Thanks...

[@loaikhaleel3849]

Thanks bro the car worked 🔥

[@gqautodiagnostics]

Awesome 👌. Thank you for posting your comment. Job well done!

[@loaikhaleel3849]

Really cuz of your video i found my probem exactly cuz we were assuming its a bad pcm /ecu i have a 2.3 turbo mazda cx7 you saved me alot am really happy thumbs up 👍🏻 😊😊

[@corvandonge3815]

Thanks for sharing the solution. Does it also occur on the Mazda 3 2007 with a z6 1.6 engine ? My car just stops after 20 min with code P0340

[@joshuarock2778]

Good brother

[@joshuagruwell7147]

Could that problem ultimately cause motor to throw a rod if you're say stuck in the snow revving high revs

[@yiwei9001]

thx bro is work👍

[@qrs3655]

Niceeeee. I love how you say thank you lord. We always must give thanks to Jesus or Lord

[@akaitv6606]

Mazda 2.3 can be a problem when you swap non drive by wire and cable throttle , they use different crankshaft pulley and cam shaft trigger .

[@nedcramdon1306]

So I guess it can't be driven like that. Didn't that fix it? Thanks!

[@gqautodiagnostics]

Hello. That is a good question. Actually, yes you can drive it like that. However, it would be best to replace the camshaft for anew one or a known good part.

[@michellearose192]

I have a Mazda 3 2005 and my car won’t start what should I do?

[@gqautodiagnostics]

You must check all the basics such as fuel pressure, spark and injector light, lastly compression to begin with. keep me posted.

[@joserodz1949]

You can welding?

[@gqautodiagnostics]

Hello, thank you for posting your question. No, you cannot. It would be best to replace it. Keep me posted and God bless you 🙏

[@dougeitze4150]

how does that fix it? you made it run untill it doesnt again

[@gqautodiagnostics]

Good question! The point of the video is to show you what the problem is and what you will need to do to fix the problem. Let me e know if you have any other questions. Have a great day and God bless you 🙏

[@johan-df7pm]

Código p0800 Mazda 3 2.3cc 2004

[@gqautodiagnostics]

Hello. Thank you for posting your question. I do not see any definition for a P0800 code. What is the symptoms?

[@user-vz4ht2ep6t]

Svp je veux en français