Рет қаралды 440
This is a 6 part series I will replaced the passenger side wheel bearing. As the video explains be careful not to damage the wheel ABS sensor when removing the bearing and be careful not to damage the drive shaft rubber covering the joints. To tighten the pinch bolts on the strut, you have to put the suspension under load. Place a jack under the knuckle and lift the van off the jack stands and then torque the bolts.
Disclaimer:
I am not a certified ASE mechanic nor do I play one on TV but I have slept at a Holiday Inn once or twice in my life time. I do research on the internet and read the service manuals when possible. I highly recommend anyone working on their own vehicle to do the same. If you do not have the tools or cannot perform the job safely please hire a mechanic/tech. If you plan on getting under the vehicle, make sure you place jack stands in the proper locations. Do not rely on the jack alone.