2006 Scion Xb fuel pump

I've searched all of youtube and did not find a repair video for a 2006 Scion Xb. I've decided to start an official 1st video fuel pump replacement for our 1st generation box. My box has 190,000 miles with the original pump. The pump still runs well with no performance issues. I'm going to replace the pump due to its service age and not risking being stranded on the road. I hope this video helps our fellow 1st generation box lovers.
Enjoy the video!
Fuel gauge troubleshoot drive.google.com/file/d/1KnA6...
drive.google.com/file/d/11XmI...
Injector Test
drive.google.com/file/d/1un35...

[@carlman2842]

One of the best instructional video I have ever seen. Thank you.

[@Deville429]

Thank you Carl Man! Best of luck to your toaster. It's my intent to help our toaster owners the savings from over priced repair facilities and the satisfaction of doing the repair job right. Thanks again for watching and your comment.

[@louarmstrong6128]

@@Deville429 do you know if this is the same for the Scion XA

[@jeffslegacy]

Such a great video! Thank you for taking the time to share with others how to do this. I went out to my car the other day and it would not start and we believe this is the culprit. My Scion has 210k miles so maybe it's time.

[@Deville429]

Wow! Jeffslegacy, you really gambled with your fuel pump. I hope your repair is a success. Also don't forget the pressure regulator. Happy motoring! Thanks for watching my video.

[@jeepjedi3894]

This has to be one of the most cleanest, thorough and professional DYI videos I've ever seen! I own a 2006 5 speed xB, first owner. Just turned 106K miles. Bought it with 18 miles and it's awesome! Been having some acceleration issues and think this is the culprit. Seen other videos but after yours, I'm now considering DYI'ing it. I hope you create more DYI vids for your Scion. Will you be creating a video regarding the fuel injectors? Thank you.

[@Deville429]

Jeepjedi, I appreciate your compliment. Most likely in the near future I'll do the injectors replacement. Read also my other replies. I've always maintained my air filter súper clean using k&n and now the generic spectre on Amazon. Clean filtered air along with clean engine oil and using a steady gasoline diet like shell will result clean well performing injectors. Just did mine last year at 215,000 miles. No injector issues just decided to replace them so that my toaster engine keep running with no hiccups. Good luck with your pump repair! Also make sure your negative ground cable is clean and acid rust free. God bless.

[@robertmorcate846]

Hey DeVille I thank you for your video is very helpful as far as I see a bird view of what you have to deal with changing a fuel pump. As a bread truck owner Scion, I really appreciate all the illustration and time you did. Huge help for all the bread truck owners. I have a 2006 white Scion xB automatic.

[@Deville429]

You are welcome Robert! Thanks for watching and good luck on your reliable toaster! Check out my automatic trans flush with the added cooler that I installed! Happy motoring!

[@stronghumantraining]

Thank you for this! I hope you make a lot more videos! You are a wealth of information. I appreciate your attention to detail and methodical approach.

[@Deville429]

You're welcome. When it comes to repairs and maintenance, I like to tackle it within my capabilities knowing that the repair was done correctly to my satisfaction. There will be more videos to come in the future. Especially one maintenance task of overhauling removal cleaning of GE Profile gas dryer. Thanks for watching my repair video and God bless.

[@nunezboy97]

I love how you specified why specific tools are needed

[@Deville429]

Good day Nunez, thanks for your humble comment. God bless.

[@oldtimefarmboy617]

I have found that if you use a paint pencil to draw a line across all the different parts before taking it apart that it makes it simple to make certain that parts are lined up. In this case, draw a line from about an inch across the fuel pump housing, the retainer ring, and an inch onto the fuel tank housing. No doubt whatsoever where everything goes when put back together.

[@Deville429]

Thanks for the advice, Old Time Farm Boy👍 Me and the rest of our youtube DIY's appreciates your input. Thanks for watching, God bless.

[@mauriciocardona6957]

Thanks for doing such a thorough and professional video I have 199065 miles on my 2005 which I’ve had since brand new and am thinking of doing this since my car is hesitating slightly when I take off from a dead stop I’ve done all other maintenance possible thanks again man

[@Deville429]

You're welcome! Just some tips for you. If you have not upgraded to K&N air filter, do it. It's well worth the performance breath for our Box engine! Also read my reply for Bill Smith. Good luck on your attempt to replace the pump, and thanks for watching. Long live our first generation Boxes!

[@mauriciocardona6957]

Yeah first thing I bought was a k&n cold air intake. I’m actually thinking Of putting stock air cleaner box back in with aftermarket k&n air filter I’m tired of the sucking sound lol

[@seanmmeyer]

Really well done, very detailed and explained everything...Thank you very much...please keep it up!!!

[@Deville429]

Thanks Seanmmeyer! Appreciate your comment. Good luck with your vehicle maintenance/repair and many years of driving pleasure 👍

[@HomesofDaytonaBeach]

Used this video to fix my beloved little scion. Thank you!

[@Deville429]

You're most welcome! Glad the repair was a success!👍

[@LiilTyweezy]

How many miles you got

[@Deville429]

@@LiilTyweezy Hi Tyrell, sorry for the late reply. My Toaster is going close to 200 K!! Almost put already 10K on the new pump. Still humming nice. Thanks for watching .

[@lamontcossey2504]

Thank you for the excellent instructional video.

[@Deville429]

You're most welcome. Thanks for watching and I hope this repair helps you and your loved ones.

[@SnipesXxX]

I may have to change the pump in my Scion xb soon and am thankful(like my old corolla) toyota designed it so one can get to it from the back seat. No reason all manufacturers can't do a access panel from the top somewhere, whether it be the trunk or backseat.

[@stevedyer2767]

Just a fantastic video...just what I was looking for

[@Deville429]

Thanks Steve, I'm glad this DIY video helped you! Good luck on your repair👍 Thanks for watching.

[@williamarzola3243]

Nice job Good teacher. Wow 👍

[@ras8678]

just a small tip but the 03-06 scion xb, the fuel pump doesnt prime when the key is on ACC, it only turns on/pumps and builds pressure once you start cranking the engine over.

[@FrydriceT4R]

Really most helpful Deville429. It is folks such as you that gives others the confidence to take on these types of projects. I'm only at the disconnection stage on my 05 toaster, but heading towards replacement of the fuel pressure regulator and the filter, probably the sock also. Just wanted to mention my '05 xB has 2 electrical connections and is oriented a bit differently than your '06, my white fuel connection has a bracket over it and approaches the tank from rear of the vehicle. I have a black colored connector for a vapor sensor, minor subtleties that pose no real issue, thanks to the confidence you have provided. Another video somewhat helpful to the process, specifically a little more detail on the bench seat bottom removal is : kzbin.info/www/bejne/n4i4hJqYi7h9b5Y (Daily Driver Down, by Jester's Garage) Mad props to both of you for all the helpful details necessary to take this on.

[@Deville429]

Good day Ronhelmuth81, Thanks for watching my 1st official repair video and for your kind, humble comment. I'm glad everything is working so far for you. Take your time and analyze your task. Keep the faith, and best of luck with your repair. Best wishes for your toaster, and long live these 1st generation Xbs! God bless.

[@hugovarela8421]

Very very nice sr. Tks so much from san diego

[@Deville429]

De nada! Thanks for watching Hugo, good luck on your repair and your toaster. Chao

[@seanthegod4585]

Great job. 👍

[@Deville429]

Thanks for your comment Sean and for watching my repair video. 👍

[@VSLComputers]

Very good video!

[@Deville429]

Thanks VSLComputers for watching. I'm glad you liked it. God bless.

[@dannyferguson9415]

Great job!

[@Deville429]

Thanks Danny, happy motoring and God bless.

[@dcampbell3349]

Great video bro. God bless

[@Deville429]

Thanks Campbell for liking my repair video. Happy travels and God bless you and your loved ones!

[@richardweyland116]

Great job! Thank you so much!

[@davesea4630]

Very very helpful thank you!!!

[@Deville429]

You're welcome Dave Sea, thanks for watching my DIY video. Good luck!

[@marianofc1874]

Than you my friend good video

[@Deville429]

You're welcome Mariano. Thanks for watching. I hope this repair helps.

[@scottiemurdaugh]

this is well explained, thanks

[@Deville429]

Thanks Chevyboy for watching. Hope this repair video helps you and your loved ones. God bless.

[@SuperMRtimmay]

thanks for the good video

[@Deville429]

You're welcome, Tim! Thanks for watching my repair video. Good luck with your vehicle!

[@paulrg67]

Thank you for this video.

[@Deville429]

Your welcome paulrg67👍

[@phillybred8580]

Thanks OG 💪

[@Deville429]

You're welcome 👍

[@ZakBgYt]

Great video. Thanks. I got the '05 breadbox....ha ha. We call it the toaster.

[@Deville429]

Thanks Zak! And good luck happy traveling with your toaster!👍

[@wilnereustache2195]

Good video ever

[@Deville429]

Thanks for watching my video Wilner, and good luck with your toaster.

[@williambrucesanders6878]

My gadge doesn't always work. Is this common? No issues but is this a sign I'll have issues soon?

[@roba6549]

Thanks a mill.

[@Deville429]

You're welcome Rob. Thanks for watching and good luck 👍

[@milk8002]

Such well detail video, and I'm looking to replace mine very soon. Question did you gain any Mpg back after the replacement??? I notice mine is down from 25 to 22,23 miles. Thank you please continue the excellent work.

[@Deville429]

Thanks so much milk8002 for watching and for your great comment. I'm averaging around 24 my self. Not much of a gain with my original clutch.I've just replaced my injectors this summer. Every year on my toaster's birthday, she gets a new k&n air filter and amsoil 0w30 synthetic 25000 oil service. She performs flawless! Good luck on your repair success and your toaster!

[@1aninterpreter1]

Thank you for this excellent video Sir. It was very helpful! I have an xa. I wanted to share my experience: Careful when you buy the replacement fuel pump! My car occasionally stops as I am driving along, I have to go over to the shoulder and restart. I saw your vid and assumed it could be the fuel pump. I bought the fuel pump but noticed the terminal connector was slightly off, a bit shorter. I installed it anyway. Car would crank but not start up. I took it out and put in the old fuel pump back in. The car starts now.. any ideas on what might cause the car to stop as I drive along the road?

[@Deville429]

Hola 1aninterpreter1, thanks for watching my repair video. As for your xa's problem, my educated guess is a fuel delivery issue since you can start the car everytime. While you are driving putting a load on the engine, the engine needs constant fuel pressure. Make sure you do have the correct fuel pump for your XA along with a new pressure regulator to stabilize that fuel for your engine. I don't know your year or mileage of your XA. My Xb is the last year 06 made, which means it's wise to own a vehicle after they updated any issues from the start of the 04 production line. My xb now has 210000 with original injectors and ignition coils. I intend to replace them this summer Lord willing so that I don't get stranded out there. My Xb always had a clean K&N air filter as well. Check your air filter as well. Good luck with your Xa, and I hope she'll run like new again!

[@1aninterpreter1]

@@Deville429 It is a 2006 scion xa. I got the right pump now and I will also replace the other parts you suggest. Thank you for your kind response, God bless you!

[@Matt-vb2jo]

Anyone know how to get the level sensor bar to stay in place? I had to take mine apart to instal pump in the housing now the bar just flips around and comes out of slot.

[@Deville429]

Hi Matrix Adjustment 4.0, sounds like to me you might have snapped the locking tab that secures the fuel level sending unit. At minute marker 15:44 there is that locking tab. I hope that tab is not damaged. Just double check to make sure the fuel sending unit lines up to the 2 holes, push in and slide toward locking tab. Best of luck

[@khodayehrangekaman315]

Hello friend ❤ awesome work & thank you for your time & effort to make this video 🫡🫶🙏🙌 where or how to get that guide for how to R&R the fuel pump , my car is 2006 scion Xa . Thank you for your response 🇺🇸✟

[@Deville429]

Good Day to you my friend. Thanks for watching my 1st official repair video. I've purchased a pdf download repair service manual a long time ago. Here is the link I've found dardoor.com/product/download-2004-2006-toyota-scion-xa-repair-manual/ I'm pretty sure the repair process is the same for our Xa cousin. Hope you'll be able to purchase your service manual or from other search sources. Good luck and may you have many more enjoyable Xa driving years. God bless.

[@billsmith2860]

Trying figure out my xb . Every time I step on the gas it won’t have any power or it will just die it will idle all day long . Thanks good video. I was thinking it was fuel filter

[@Deville429]

It could be a number of factors. Restrictive air filter, partially clogged injectors, fuel pressure regulator. The motor is a giant air pump. As long as the valve(throttle body) is partially closed, the idle circuit is active (running), which means there's no load (demand) from the motor. If you are up there in mileage, my gut feeling opinion based on your driving habits, heavy carbon buildup if you just normally drive your car with no wide open throttle actions. If you do drive with occasional wide open throttle that makes your engine scream to blow out the old, stuck carbon, then replace air filter, along with fuel pump and pressure regulator. I haven't replaced my ignition wires, coils yet. They are still original. Just replaced plugs once back at 90k. Plugs running good now with over 100k! Remember your engine depends on a clean air filter along with clean motor oil for your fuel injectors to work optimally. Just curious, is your toaster an 04? The saying goes never buy first year model of a car. I've waited two years later so that Toyota,Scion work out the kinks. I hope this advice tips work out 4 you. Good Luck!👍

[@Deville429]

Also one more thing Bill, I'm an occasional wide open throttle driver when entering in merging highways. My car still has original fuel injectors. Thanks for watching my repair video and again good luck.👍

[@1aninterpreter1]

I installed the Fuel Pump and Regulator a few weeks ago per your instructions. It runs great, thank you. Now it has a new issue. I use the car once in a while. In the morning it starts on the second try. Once it starts if I turn it off and back on it fires up immediately. If it sits for a few hours I get the same issue, it starts on the second try. Any ideas on what it could be?

[@Deville429]

Hola 1aninterpreter1, I'm glad your Xa is running great. My educated diagnostic opinion is your xa's not maintaining fuel pressure in that whole fuel circuit (pipeline). Based what you tell me that the car starts fine and all. Make sure your electrical(battery) is healthy with full amperage crank. Other than that I would drive your car around till its low in fuel, then double check your fuel pressure regulator install, making sure it's fully seated inside that O ring for a good seal, along with your fuel pump that also have a good tight O ring seal. My best of luck to you and hope your get your little Xa running great. Let me know how it works out. Then I'll check my service manual if there is a residual fuel pressure check specification. Again good luck God bless.

[@Deville429]

I've checked out my service manual. I included the injector test link under description. It looks like your car may benefit a new set of injectors. I just replaced mine, relatively easy. Discharge fuel pressure. You'll need a fuel line disconnect tool. ( Lisle 39210 Main Fuel Line Disconnect) Find your best price on the internet. Once you replaced your injectors, my advice is to stay with one brand gasoline(Shell, Sunoco). Do not mix your car's diet. Certain gas brands don't have the added detergents causing accumulated carbon deposits. Here is the web link for more info. newsroom.aaa.com/2016/07/aaa-not-gasoline-created-equal/ I personally use Shell. I replaced my injectors and they still look just like the new ones I installed. The key is to make sure you have a clean air filter at all times along with clean engine oil. Here is another link to high quality gas. www.toptiergas.com/ Good Luck!

[@1aninterpreter1]

@@Deville429 Thank you so much! God Bless you Sir!

[@JoseMartinez-fi7xv]

Quick question for Mr. Deville429 and much props for your excellent video. You could be an instructor my friend! Question 1: Did you have to rewire the new fuel pump or did you use the original connection from the old fuel pump? Question 2: What is the part number for your Airtex fuel pump you used on your scion xb?

[@Deville429]

Gracias Mr. Martinez, I used the original wire connection and I use airtex part number E8213. Remember can't use the rubber grommet that's included in the fuel pump, won't fit on the housing. The website I ordered from was at rockauto.com Don't forget the fuel pressure regulator. Good luck with your toaster my friend and happy motoring.

[@JoseMartinez-fi7xv]

@@Deville429 Gracias amigo y buen dia.

[@nuviamor]

Where can I find the bolts that secure the pump itself? Mine is missing some of them, no wonder the gas pump doesn’t stop when the tank is full. I may as well also change the fuel pump.

[@Deville429]

Hi Nuviamor, here is the website where I order OEM parts for my toaster. Fuel System Components for 2006 Scion xB | McGeorge Toyota Parts parts.mcgeorgetoyota.com/v-2006-scion-xb--base--1-5l-l4-gas/fuel-system--fuel-system-components Item number 32 is the small bolt that secures the plate pump housing. Good luck with your toaster and thanks for watching. If you have any more questions feel free to ask, and I'll do my best to help.👍

[@nuviamor]

Thank you! Appreciate it.

[@4usall181]

Did the orignal wire plug right into the aftermarket pump? If so do you have a link to the pump u used? Thanks

[@Deville429]

You're welcome 4usAll. I used the original wire connection and I use airtex part number E8213. Remember can't use the rubber grommet that's included in the fuel pump, won't fit on the housing. The website I ordered from was at rockauto.com Don't forget the fuel pressure regulator. Good luck with your toaster my youtuber friend. Thanks for watching and happy motoring. www.rockauto.com/en/moreinfo.php?pk=59959

[@jeffslegacy]

I finished up and put the fuel pump back together and reinstalled the assembly in the tank. Primed and started it and now my fuel shows on E and the gas light is on. But I have 3/4’s of a tank of fuel. Now there is a click click sound that I have never noticed coming from the left side of the engine near the ABS Relay & Fuses

[@jeffslegacy]

Disregard!! I disconnected the battery and waited 10 minutes and then reconnected and it started and the fuel gauge went up and the gas light went off! Super stoked to have this done. You are the man, I couldn’t have done it with out this great video and your calm attitude lol!! Have a good one and thank you so much!!!

[@Deville429]

@@jeffslegacy 😉👍Amazing! You're most welcome! Glad your repair was a success and on top of that the job was done to your satisfaction, not relying on those local shop mechanics that rob your hard earned money. God bless, enjoy your Holidays and long live our 1st generation toasters! Happy motoring!👍

[@brettsenior2805]

Excellent video. How's the Airtex pump holding up?

[@Deville429]

Hi Brett, the Airtex pump still performing new with that nice OEM whine sound. Thanks a bunch for your compliment. No doubt, this pump will last another 200K! Just finished breaking it in. Kept the tank full most of the time, so that it burns in right. Hope this helps out for all our box toasters out there. It's just about this time frame 14yrs to replace the fuel pump. Good luck!👍

[@brettsenior2805]

Just did mine today with 202000 miles. Bought a Denso years ago but never put it in. Was done in an hour and a half thanks to your video!Was so easy.Runs and hums like new.Also noticed in my tank was what looked like metal shavings and some things floating around. Vacuumed them out while I was there.

[@Deville429]

@@brettsenior2805 You're most welcome. Glad the repair worked out for you. Your toaster should last you another 200k!🙂👍 Good luck with your toaster box!👍

[@shmoop2jzge799]

I see the NAPA box in the video but just to confirm , did you purchase the fuel pressure regulator from NAPA?

[@Deville429]

Hey Vicente! Yes I purchased the regulator at napa. rockauto.com at that time did not have the regulator. Instead of waiting, I went to my local napa. Thanks for watching and best of luck on your repair. God bless

[@jeffslegacy]

Man, that evaporation hose is killing me, it will not come off!!!! Try as I might with or with out tools. It’s a crazy little bugger for sure

[@jeffslegacy]

Omg I got, that was probably the hardest part lamp. I used the locking pliers, squeezed the tabs inward and the tapped on a blunt screw driver genteelly until it got up to and little over the rib and then I pulled it off. Now I am sweating up a storm lol

[@Deville429]

@@jeffslegacy patience my toaster buddy, eventually every step will be successful. 😉👍 Remember keep your tank half full to properly break in your new 200k mile pump. Good luck 👍

[@jeffslegacy]

@@Deville429 thank you my friend, I really appreciate the encouragement!! I actually pulled the pump itself super easy with a pair of vice grips

[@tommimarc1]

Sneak a small flat screwdriver between the to parts and it will come right apart.

[@samsonmcclendon1901]

Great video but the fuel pump is housed in the filter that needs to be replaced also that sock is just a screen

[@raelmacintyre974]

Can I ask where to buy the fuel pump assembly?

[@Deville429]

Good day, Rael. Thanks for watching my official repair video. You can buy the actual fuel pump motor at your local parts store if they have it. I use Airtex part number E8213. Remember can't use the rubber grommet that's included in the fuel pump, it won't fit on the housing. The website I ordered from was rockauto.com Don't forget the fuel pressure regulator. Good luck with your toaster my friend and happy motoring.

[@TheLansang]

hello Sir.. do you think it's possible to do this with the fuel tank full? i just filled it up lol

[@Deville429]

Hi TheLansang, If your fuel pump suddenly died, my best safety oriented safety experience opinion would be to siphon the gas into a recommended designated 5 gallon container or two 5 gallon containers. Then you may proceed to replace your fuel pump in a very well ventilated space. Best of luck on your repair👍

[@dennisl4961]

@@Deville429 its not dead yet and i dont think it will die soon.. i juat want to replace it with new OEM Denso because i drive this beast 150 miles per day lol

[@chrraydendeeznuts6978]

Boy! I could kiss ya on the mouth🤠 Knowledge is power!

[@Deville429]

Wow Chrrayden! I'm glad you liked my repair video. I hope this has helped you or your loved ones bring satisfaction of continued Toaster driving for years to come! Thanks again for watching and your comment. Best of luck!

[@jakeshallenberger7413]

Are you still driving this box ?

[@Deville429]

Hi Jake, yes I am still driving my toaster box going on 15 years!👍 1st original owner purchased brand new. Still has all original ignition system except for spark plugs, original struts, original clutch (1st time driver stick shift). Just replaced my rear brakes, shocks, exhaust system. Now going to work on front brakes. Thanks for watching and God bless.

[@mti14]

What about the middle of rear seat, you totally skipped over that!

[@williambrucesanders6878]

My gadge doesn't always work. Is this common? No issues but is this a sign I'll have issues soon?

[@Deville429]

Good day William! Yes, especially if you are up there on mileage. From what I gather from the service manual which I linked now at the end of the description text, hopefully it's the fuel sending unit assembly. Always start the cheapest route first to fix the problem. The order of troubleshoot should be sending unit, wiring (which should be in good shape) and last the whole combination meter assembly. You'll need a standard multimeter for your checks. Good luck in your repair! Thanks for watching my video repair and God bless! Here is the fuel sending assembly unit from rockauto. www.rockauto.com/en/moreinfo.php?pk=4717806&cc=1432818&pt=4436&jsn=326