2006 Silverado 5.3 Dyno Pull (BTR Stage 4 Cam)

Quick 1st gear pull while tuning my 2006 Silverado W/T.
Btr Stage 4 Truck Cam
Holley Sniper 92mm Intake and Fuel Rail
Stock DBW Throttle Body
Flat top pistons
799 Heads
LS7 Lifters
Accel 36# injectors
Aeromotive 304 Fuel Pump
Pace Setter long tube headers
Xpipe and dual Dynomax race bullets
3200 stall
Mostly stock 4l60e
Stock rearend
Stock Coils

[@repurposedperformance5762]

1st gear pull? who TF does that? O wait, I know who.. The same guy that failed to properly strap that truck down let alone center it on the rollers. I am not ragging on you and your truck is beautiful but if it were my truck I would have lost my shit and demanded it be removed from the dyno immediately for that careless act that did not provided any useful information but instead risked severe damage to the truck and put everybody around at risk for injury or even death. As a shop/dyno owner & operator I would fire any tuner immediately who displayed blatant ignorance as seen here. With that being said I love your truck, it is gorgeous & I hope you have found a shop that treats your truck with the respect it deserves. Happy Hotrodding!

[@rmmm6725]

I see it is strapped in the back, can’t see the front. Please explain

[@isaacquesadaquesada8482]

@@rmmm6725 when u dyno like that the straps in the back have to be crossed so it won’t slide I’ve seen sum not do it like this guys and they completely drove off

[@That_Rowdy_G8]

Whoever strapped this truck to the Dyno should be punched in the face and fired smh

[@badkarma684]

That roll pan is so clean tho

[@boomjeep99]

Im in noooo way calling it out but damn the throttle response and it got up on it FAST

[@peterl2817]

I’m about to put a truck Norris cam in my truck and I’m excited bro what transmission did you have at the time? Post more videos lol!!!

[@ixxloose]

Their wasnt any issuse with 243 heads and flat tops? What size gasket did you use

[@waynewatkins1359]

Do you have Rims with four-inch backspace

[@joshuamay1513]

Ur supposed to cross the straps in the rear to keep it from sliding like that and supposed to cross the front end down on front wheel drives. They should of known better. It was nice pull but dangerous to do that way

[@Cultofpersonality09129]

They’re not even tight. That would be a good start.

[@quintongeist210]

Prolly lost hp numbers from spinning too

[@jerrybowers2119]

Tires smokin walking on rollers not anchored correctly safely dangerous but hellacious throttle response.

[@levibarnhart7262]

That's why you cross the straps on rear

[@nathanverhulst8228]

Bad fuckin ass congrats

[@boomjeep99]

That straight engine no power adder? Bc thats fkn badass

[@DoubleJ419]

Yessir

[@boomjeep99]

@@DoubleJ419 ive been out of racing few yrs my last was 406sbc.but nows days ya buy a 4.8-5.3 for what i gave for my heads and make more hp just few mods

[@ericperry4934]

Max rpm? Timing degrees table? Rear gears? Exhaust size? Bore?

[@DoubleJ419]

@ericperry4934 I do not know the max rpm or timing tables. I did not tune it personally and not info I'm savvy on. Everything else is stock. The exhaust is just longtube headers dumped into turbo bullet mufflers. The truck was originally a 4.3 w/t, so the gearing is something goofy low like 3.08? I don't recall exactly. Stock bore.

[@ericperry4934]

Type of trans and stall?

[@excelsior2433]

Rip 4l60e

[@DoubleJ419]

Don't you put that bad juju on me... lol so far so good 4yrs later

[@LeftLanePerformance]

What muffler do you have ?

[@DoubleJ419]

Dual dynomax race bullets

[@floydharrington5672]

@@DoubleJ419 do you have cats ? I’ve got the same cam on a 4 door and great idle but raspy as hell when on the gas

[@DoubleJ419]

​@floydharrington5672 no cats, but do have long tube headers on it. Sorry I just noticed your reply.

[@eduardovaldez900]

What injectors you using

[@DoubleJ419]

@eduardovaldez900 just accel 36lb. Nothing too fancy.

[@scottsmolik5221]

Looks like it was a little fat on the bottle. That's a nitrous pull if I ever heard one

[@DoubleJ419]

@scott smolik I wish it had nitrous lol its a turd man... only dynod like 335whp. Wasn't nothing crazy.

[@scottsmolik5221]

@@DoubleJ419 oh, well it sure sounded impressive, maybe it was the downshift upshift and just tapping the rev limiter a bit. good looking truck man!

[@ThrottleHavoc]

That’s a massive safety hazard, whoever strapped that truck down should never be allowed to touch a set of ratchet straps again 😂

[@jeremygilliam6756]

What did it make?

[@DoubleJ419]

Very low. Only 334whp before it blew the upper radiator hose and we stopped. This was almost 4yrs ago. Gonna have it re-tuned again at On3 Performance this year by the guy that did my turbo truck.

[@JKZ103]

People just don't forget their dyno numbers with all the money spent on it... if your gonna post a video put the numbers up bro! Nice truck though

[@DoubleJ419]

Thanks! Was only 335whp, thought I'd said that somewhere.

[@htx_davi5227]

@@DoubleJ419 all that just for 335 whp you got a shiity tuner bro

[@christophermix6845]

@@htx_davi5227 that's pretty solid numbers for a 5.3.

[@htx_davi5227]

@@christophermix6845 yea looking back at my comment seem pretty dumb i did my research and dats the average number for a 5.3 i was pussing 338 in my cammed 5.3

[@christophermix6845]

@@htx_davi5227 yah if you can get that much to wheels NA, that pretty good. My stock 5.3 only made 227rwhp and 246rwtq stock just exhaust and k&n drop in filter, but I've got a 4inch lift and 33s.

[@victorboyd4052]

What did it make

[@DoubleJ419]

@Victor Boyd not much... only like 335 whp. But... it is a mustang brand dyno and they typically read a little lower than others. But not a ton lower. I'd guess it's still under 400whp. Having it re-tuned at On3 Performance sometime this year.

[@victorboyd4052]

What’s the cam specs 🤔

[@jackbrown1025]

All that money invested in a 5.3 just for a stock 6.0 to walk away from it lol

[@DoubleJ419]

@jackbrown1025 it's a show truck... lol nothing more, nothing less. If you look through videos, I also have a 500+ hp RCSB with a 6.0... 🤙

[@NuckleHead714]

How much hp did it make

[@DoubleJ419]

On this particular dyno, 335whp. The guy that owns the dyno said this type typically reads lower than normal ones. I didnt even know there were different kinds. But the guy doing the tuning said with the numbers he was seeing on hp, hed say around 360-370whp, and around 400 to the crank.

[@davidcunningham00]

How much torque was it making and at what RPM that is what I would like to know

[@DoubleJ419]

@@davidcunningham00 I dont recall, but will ask if the guy remembers.

[@DoubleJ419]

@@davidcunningham00 he said the only one he recalls was the 1st gear pull @ around 3100rpm was 280ish... I have video somewhere of another pull I think I videod the dyno screen... have to look for it.

[@bigsean2473]

@@DoubleJ419 400hp to the crank?? your not getting 360-370 to the ground. at best your getting 15% lost of power but probably in the 20-25% lost so 320whp if your lucky

[@richielopez2016]

What gears are in the rear

[@DoubleJ419]

Still the v6 rearend gears... 3.23s I think?

[@DoubleJ419]

Truck came with the 4.3v6 when I bought it new in 2006.

[@richielopez2016]

DoubleJ419Fon trying to do the same build and was wondering what gears to use..??

[@ls4.8frank]

@@richielopez2016 go with a 3.90 and you can thank me later. Lol

[@richielopez2016]

@@ls4.8frank what converter did you use

[@Squirrelnutts]

I need the build sheet and numbers

[@ls4.8frank]

I'm sure he will shoot that right to you guy. Lmfao

[@michaelmorrison4201]

Why a 1st gear pull? You have to run that shit out. Mustang dyno?

[@DoubleJ419]

That was the only one we got on video. The next one it blew the upper radiator hose and the guy doing the tuning didnt have time for us to clean everything up and get coolant back in it.

[@DoubleJ419]

As for it being a mustang dyno, I have no clue... the guy that owns said dyno that it typically reads lower. I dont know shit about dynos to even begin to explain it lol

[@Henryb869]

Dawg, if youre gonna spend that kind of money at least spend it on a short bed not a work truck

[@DoubleJ419]

@Henry_braun01 lol I get that alot. O bought this truck brand new in 2006 with zero intentions of it ever escalating into what it is haha. I also have a RCSB though. It's on my channel if ya look 🤙. This one here is just for show and driving.

[@terryspaulding2000]

Well that was sketchy as fuck....

[@DoubleJ419]

Indeed.

[@TXLS_RAM]

What a joke lol no power.

[@DoubleJ419]

You're not wrong. Was just built for show and to be a driver as I drive cross country to shows and don't trailer it 🤙 thing can't get out of its own way... but 100x better than the 4.3 that was in it. Nothing in the description claims it makes big power.

[@DoubleJ419]

My other one is built for power... maybe I'll upload a video of that one to appease you 🙄 lol