2006 Silverado Crew Cab 4/8 Drop

[@eduardosaucedo7834]

Truck came out bad ass all u need is a loud exhaust🔥

[@lukeo9459]

Eduardo Saucedo taquache

[@Bushspaperplanes]

50/40 series is plenty

[@drizzylsd5885]

I want those rims but everyone in Texas be having them and I don’t wanna copy no one but daaaaamn they look so nice 😭

[@elcompatavo9365]

If you like them get them dont worry about anybody

[@moe4962]

What’s the name of those rims?

[@drizzylsd5885]

@@moe4962 texas editions, it’s funny cuz I look at my comment yet I have the same rims 💀 but they’re replicas 😔

[@fusion82]

If you want rims that most people don't have you have to pick out some ugly rims. I been having 24 inch texas edition rims on my 02 silverado since 2011 and still never changed them

[@jessemarquez5332]

Come to Texas you see this set up all day...Them rims tho! Nice

[@_rubenocampo_]

Are those 24s Texas Editions

[@mafosa8519]

It does look nice. And clean.. Any rubbing over speed bumps? Thanks for sharing. Larry

[@briandelacruz7985]

I looked up Silverado’s on my school computer and I found this and it’s my wall paper

[@jesustrujillotileinstaller6133]

I really love it. 👍. I do have a Chevy Silverado same year , but mine is extended cab, but I wish I had the crew cab instead.

[@ricodragon4337]

I had to tub mine.... She would rub the top of my inner fender when I went across certain dips and bumps.... I almost went to 22’s but I found a guy to tub mine for $400 and he did a phenomenal job.... That was three years ago.... Best decision I made to keep the 24’s.... I also run 275/30/24 tires.... She looks damn good!!!!👍🏾💯

[@Jasson77xx]

how come the passenger side looks like it need to drop more still looks like theres a gap?? 3:33

[@Kevin_Yagoonie]

Called chevy lean. It happens

[@ddvm5482]

Yup Chevy lean I’ve lowered alot of trucks in the past 15 years and I can’t say I haven’t had one that doesn’t lean to one side or another to some degree..the front is pretty easy to correct the high side the rear is a bit more difficult..but they all need a little finessing when you install a drop kit most people just bang the kit in on a weekend and drive off into the sunset living with discrepancies

[@rudyespinosa7119]

Dam bro I was going for a 4/6 drop I change my mind 4/8 it is

[@Brayan19949]

Where you get your lowering kit from?

[@salg1907]

So you didn't change anything in the front except for the lower control arms? You have stock upper control arms?

[@3dgar.12]

Have the same truck thinking about doing the same drop I already have the shackles on and have the flip kit just wondering how you dropped the front

[@209GARAGE]

@@3dgar.12 djmsuspension.com/product/1999-2006-2007-classic-silverado-sierra-4-inch-lowering-control-arms/

[@Bravo0701]

Ahh I’m not sure what I wanna do now 😖 either 4/8 or 5/8

[@giotrz5234]

do you have the link to the kit?

[@lowboostedaccord4933]

I need to do it to my crew cab 4/6 drop

[@elcesarblogs1699]

where did you got the control arms bro

[@kennethkapka8911]

inside of both front tires are worn. you having alignment issues?

[@Bushspaperplanes]

What’s your driveline like? Vibrations?

[@melapelas6972]

Would you recommend getting a underbed notch on a 4/8 drop? And you are sitting on a baby notch correct?

[@xainetyy8966]

I wanna drop my truck you got a link for all the parts you bought?

[@kevykev6481]

That truck is 🔥🔥🔥

[@tommiebrown8573]

Looks great

[@209GARAGE]

@@tommiebrown8573 thanks brotha 💯

[@dfishhlife8442]

Beautiful truck and the stance is really nice.

[@mustangmunoz8]

I wondered what happened to the single cab, I approve the Michoacán plates! Too bad we can do that in Texas.. nice drop!

[@arnulfogonzalez7852]

Did the back rub cause I was told an 8 in the back would rub or do you have really thin low profile tires one

[@Crewcab_stilow]

Who lowered your truck ?, im from stockton and would like the same drop on mine . Please and thank you bro.

[@johnnytristan241]

Looks really good

[@michaelcollins6024]

What wheels were these? Silverado? Tahoe?

[@Z28Blake]

As long as you like who cares what everyone else thinks.. With that said it does look great! Nice job.

[@leroyhall953]

Does it align properly

[@ramonguerrero9359]

Where can I get the drop kit at ? I’m lookin and I can’t find it

[@matadaniel]

any camber with just the lower control arms ?

[@oscaraviles4193]

Do u need 2 piece driveshaft for this drop

[@BigBoi-hf8uv]

I know that this is a older video but whenever you lowered the truck was the passenger side higher then the driver side...i just want to make sure that alot have have that problem before

[@JuanRamos_314]

Truck came out looking nice

[@mackeralkingjr9601]

I have a 2000 silverado 1500 extended cab, would you recommend 4/8 or 5/8 drop i will be on 24s with 255/30/24.

[@209GARAGE]

4/8 with 24s 275/30/24 you’ll like it 👌🏽

[@JayyMoney-vr7nv]

What makes it a 8 inch drop? Someone told me I need a under bed notch for 8 instead of a c notch

[@209GARAGE]

@@JayyMoney-vr7nv flip kit is 6” + 2” lowering shackles but yea this was a bolt on notch and it was basically maxed out would bottom out while driving

[@JayyMoney-vr7nv]

@ ohh okay thanks

[@JayyMoney-vr7nv]

@ so underbed notch is probably better? For 8 anyway

[@209GARAGE]

@ yup all day 👌🏽

[@s197_Luiz]

truck is badass where u get them wheels from?

[@MiguelSanchez-rb3tw]

I want my 99 Silverado at that stance. I have same rims but 26s. Should i do a 6” drop? Or 7”. My height is probably the same as your stock one maybe higher 😣

[@UNBOUNDED_Films]

I’ve been wondering if you can still put some weight in the back of a dropped truck

[@jerrytoro9122]

Oscar Flores suspension gets stiff so yes you can unless it’s a super heavy load then you might get rubbing depending what your set up is

[@JoseRomero-xc7ks]

APPROVED 😍

[@killamike6403]

looks just like mine just I got 22s not 24s but want to get 4s tho does make a difference mine are also texas replicas

[@JunniorrrB]

You got both top and bottom control arms?

[@Ggeessee2603]

Did you need to update to a two pice drive shaft or is it the stock drive shaft

[@209GARAGE]

Jesus Sauceda this was with stock driveshaft I just made sure it was lined up at the right angle with the rear end

[@eduardosaucedo7834]

Truck came out bad ass all u need is a loud exhaust

[@5.7_chelo]

Damn bro it turned out sick af 🔥🔥🔥🔥

[@angelalvarez1289]

Your brother does drops ?

[@brandondennison7397]

Please for the love of god can tell me the color code on this truck. I’ve seen multiple video of these trucks with the same color and no one ever replies. It takes 5 seconds to look In the glove box for the color code

[@209GARAGE]

Graystone metallic

[@1lowextcab196]

Why is the passenger side front wheel not dropped like the other side

[@arnulfogonzalez7852]

Like the back side ??

[@denegocioz3359]

What kind of sound system could I set on a truck like that without having the subwoofer box on top of the seats?

[@matlock253]

Clean homie

[@Heimtreats]

Clean man

[@svbrrrr]

Yo did you get any rubbing and what tire size are you running?

[@freeshavacado3959]

Looks really good. I'd go with a slightly thicker tire. I've had a car for way too long. I need to get a truck. I like this year and body style too.

[@froilanfranco8617]

Did you use aftermarket front or rear shocks

[@angelz98]

What rims and tires are those? Looks clean.

[@209GARAGE]

Angel Zavala 24” Texas Editions 275/30/24

[@TheUnknown-qn8bb]

Love it! Slap some flowmasters on the exhaust

[@ericsandoval3016]

Do you still have the stock driveshaft, if you do does it rub?

[@BodegaCivic]

I’ve been looking for the same answer

[@ryancraker7456]

Dual drive shaft???

[@209GARAGE]

@@ryancraker7456 was rocking the stock one piece & then sold the truck and then new owner upgraded to a 2 piece after some time

[@javierzuniga492]

Would u have a part number on cnotch or site purchased from ?

[@DreamHachi]

djms website. You can get a 4/6 drop complete kit with the lowering arms and c notch. Then if you wanna go lower go to individual parts for your truck. You can get drop springs and shackles up to 2 inches for a total of 6/8 drop

[@flawlesswheelsllc]

Bro what did it cost to do that drop

[@suelo_abuelo8066]

Look sik bro, what did you do about the stock drive line from hitting the back of the cab?

[@209GARAGE]

Suelo_ Abuelo thank you 🤟🏽 & I notched the crossmember that holds the gas tank

[@suelo_abuelo8066]

209 Garage cool 😎 it doesn’t hit the back of the cab? Cuz I’m gunna go with the 2 piece drive shaft from Reklez on my 06 CrewCab so it doesn’t hit either one cross member or cab.

[@Veterangarage]

Looks great man

[@roswellautosales8018]

where did you get the lower control arms bro?

[@freddyhyslope5415]

Did you have to do anything for drive shaft clearance?

[@ElCuhAlex_01]

Did you ever get an answer?

[@209GARAGE]

I didn’t make any clearance but it’s definitely needed to be on the safe side when having passengers or a load on the bed. I’d recommend a 2 piece drive shaft that’s the best way to go

[@mob6754]

Just curious are you from Stockton?

[@officialsamuel23]

Did you have to get a 2 piece drive shaft? I lowered mine to an 8 in the back but I’m hitting my bolt on notch

[@christopherguerrero192]

Where did you get the badge in ur grill?

[@ivanvalencia3796]

Where do you get the round michoacan Thing thats on the front grill

[@mauriciohernandez6881]

are those IROC rims

[@tayk6815]

What’s the sticker called on the grill bro??

[@209GARAGE]

I bought it off eBay it’s called a “grill badge” mine was specifically “Michoacán grill badge”

[@ramiromartinez3588]

Did u cut off the muffler?

[@angelz98]

Do you have problems going over speed bumps because of the wheelbase?

[@209GARAGE]

Angel Zavala nope, truck was my daily for a while never had any issues

[@Jesus-yd9km]

Will a 5/8 drop work on 24s?

[@dwaingeoghegan8150]

is your truck 4xheel drive? if so has it affected the ride quality in 4wheel mode

[@209GARAGE]

Dwain Geoghegan it was a 2wd

[@luxurnathan4353]

What did you use in the front?

[@LuisFernandez-cf1nl]

You from modesto bro ?

[@mauriciomercado6130]

How much was it to drop it

[@Toninaiguanas]

What size are the tires?

[@swingdasierra4036]

Is this the 4” drop control arm from summit racing

[@pedroruiz8190]

Azael Camacho I’m sure summit has them but they look like the control arms made by DJM. I got the same ones on my 06. Keep stock spindles and springs, lower control arms do the dropping

[@JunniorrrB]

is it just one lower control arm or 2 bro? On one side

[@JunniorrrB]

Bottom and top one

[@209GARAGE]

Just the bottom one

[@ssvortec8384]

How much do they charge to lower it?

[@JunniorrrB]

does it have a c notch bro?

[@209GARAGE]

Yessir underbed notch

[@JunniorrrB]

@@209GARAGE can yu send me 4/8 drop kit link broo?

[@JunniorrrB]

can u send the links to kits broo😍?

[@akaspookz2497]

Bro it looks like its leaning more to the right more??

[@BigBoi-hf8uv]

What size rims & tires are those cause I want to get a drop kit for my truck that sits on 24's

[@froilanfranco8617]

Did you use the stock shocks? or installed 4/6 drop shocks

[@Genarodinero13]

What truck those rims came off of

[@lowboostedaccord4933]

Looking nice bro 💯

[@suavesosmooth6768]

Where would I be able to get those rims

[@CarlosLopez-zt6th]

Does it rub on the back like on bumps or potholes?

[@Titoo.1]

Obviously

[@CarlosLopez-zt6th]

Gay..my dont

[@nikoreynosa4547]

Looks good 313 detroit showing love

[@juanpereyda6323]

What’s wheels are they

[@209GARAGE]

BUFFALOWINGS FORTNITE H 24” Texas Editions

[@Miguel-vd1mn]

Never liked slammed trucks but this one is nice fr 🔥

[@originalg6918]

This isn’t technically “slammed” but it’s low asf, he’s not body dropped or anything lol. I actually don’t like when they’re that low, can’t even drive them around with out a bag system

[@rcash3625]

I wanna do it to mine but I want more pop on the wheels... Cut the fenders throw on flares and spacers would be dope

[@joshuabelaski4710]

What size tires? & did you need to redo the drive shaft for the 8 inch? I’ve been told I have to on my 05 crew cab because the frame, Looks sick bro!

[@Error343434]

When i turn my tires rub on my torsion bar does the lower control arm fix that?

[@ddvm5482]

Kaspar40oz don’t think it will, drop control arm or not the torsion bar stays in the same place..I’d suggest a different offset rim or skinnier tire..if neither one of those suit you then maybe no sharp turns

[@BodegaCivic]

Delylah & Devan for a 4/6 drop on a crew cab 06 do I need to do anything with the drive shaft ?

[@Error343434]

Cesar Fernandez you need a two piece drive shaft or you need to notch the crossmember. The driveshaft will rub

[@floresrich2144]

Beautiful truck

[@ervs08]

Came out SOLID bro ! Question is 🤔 quema oh no quema ?

[@marzbarcarter7924]

Clean

[@209GARAGE]

Thanks bro 🦾💯