Going to try this on my own , 65 years old and still doing my own work , what doesn’t kill ya will only make ya stronger, great video,
@boganindustries2 жыл бұрын
I just did this today. Thanks to this video there was no hidden issues. Very straightforward thank you!
@Zixzi1043 жыл бұрын
Very impressive how you do this job on the driveway!
@WMCS3 жыл бұрын
✨🍻🍻
@simonfleming8862 жыл бұрын
There is so much I'd like to say about the quality and detail of this vid but really .....FANTASTIC sums it up nicely. Your abilities are truly under rated. Just about to start on the wifes car over here in NZ. Cheers Kevin
@WMCS2 жыл бұрын
Hey Andy , it’ll be a toss between the mini R50 supercharged and Citroen C5 I’m thinking of phasing them both out of the equation soon. Yep I’ve had three new impact. 3/8 low torque. 1/2 drive mid range torque. . 1/2 drive super torque that can apparently flip a mini on its’ roof The new jack is wider and sits very low. Which is great for stability and it has a slow release hydraulic. So the car won’t just come down too fast. I’d say you’re in your early 60’s is that correct
@williambautista49124 жыл бұрын
i like your video no talking , plain works. watching from Philippines
@WMCS4 жыл бұрын
Thanks for the support all the way from the Philippines 🇵🇭...
@drexxore4 жыл бұрын
Another top video as always Kevin! Good to see your still keeping busy!
@WMCS4 жыл бұрын
Hi Dread .., still going strong pal ..,, hope you’re keeping well yourself. Just got another camera .., they keep braking ✨✨.., I need one designed by NASA😁
@leebridge918710 ай бұрын
This video was a God send. Thank you. I had to replace a rusted out subframe too and this gave even better access.
@sudinebabz86514 жыл бұрын
👍🏽 the clutches warrior 👏
@dirkschutte51863 жыл бұрын
Eine super Anleitung für meinen Swift 1.3 AMT, nun habe ich den Mut es selber zu reparieren. Werkzeug und Hebebühne ist vorhanden. Mach weiter so, das gefällt mit gut👍
@WMCS3 жыл бұрын
Great to hear from you Dirk🍺 🍻
@blueanglelooksbyjophy98484 жыл бұрын
The work you do is super and it shows sincerity
@WMCS4 жыл бұрын
Thanks for the review.,, much appreciated.,
@marlonmiller77143 жыл бұрын
Love how he's just doing it 💯💯💯 taking mines out tomorrow
@WMCS3 жыл бұрын
Hope it all goes ok. You’re doing it yourself. 🍻
@marlonmiller77143 жыл бұрын
@@WMCS yeah it's the 2010 suzuki swift sport RS416
@lysongrzes272 жыл бұрын
This is what I was looking for ... Thanks .. Greetings from Poland👍💪💪💪🇵🇱
@ulysse42964 жыл бұрын
Bonjour Kevin,je me suis abonné à ta chaine ,et que dire !! tu es vraiment au top ,le travail que tu fait est vraiment impressionnant et tu gères (sur le bord de la route si on peut dire)+++++++++++++++++++++
@WMCS4 жыл бұрын
Bonjour pascal..,, j’espere que vous allez bient..,, Merci pour la revue... c'est du travail mais ça paie bien...
@holdenjohnson82392 жыл бұрын
So much work involved I was gonna try do my niece's clutch never done one before. But after watching this I might send it to a pro I'd be able to strip it down no problems but put it back together is another story
@todayintheshopbanksy59042 жыл бұрын
I've got to do my daughters swift soon, all looks straight forward. Thanks for posting.
@WMCS2 жыл бұрын
No probs hope it all goes well.
@arthamilton23794 ай бұрын
A TRULY excellent video presentation. Could not be better. Thank you.
@mikeberry3044 жыл бұрын
For a small car , they are a pain in the arse the Suzuki Swift , have done a few of these Kevin , a ridiculous amount of bolts for such a tiny car , not nice to do , saw that leg kicking up there Bud , great video and great camera work as usual , keep up the good work and stay safe 👍😎
@WMCS4 жыл бұрын
Thanks for taking time to leave us a review mike .., really appreciate it. You’re absolutely right there.,, if I can point out., that’s one thing I find a bit annoying with Far East cars .., the amount of small brackets and fixings that are fitted to hold just a small piece of wiring ..,, and to top it all .., the gearbox mount design 😏..,, But it’s all good tho. We love it really us mechanic 😁😁
@mikeberry3044 жыл бұрын
@@WMCS of course we do Kevin 😎😎😎😉😂🤣👍
@drober0271 Жыл бұрын
I finally got round to doing the clutch swap last week and got into some positions I never thought possible at my tender age😂. Thank you Kevin for this detailed video, without it I'd have been lost. Anyone else thinking of taking it on there's a lot to do before the clutch housing comes off but follow this step by step video and you too will achieve your goal 😊. Now where did that last bolt go 🔧
@gregdelasavoie21054 жыл бұрын
Ahhhh my Friends....the n'est mechanics of the Europe.... thanks you for this clip
@WMCS4 жыл бұрын
Salut mon Amis.... Merci bient pour votre compliment..,, j’espere que vous aller bient et en bonne sante....
@gregdelasavoie21054 жыл бұрын
@@WMCS oui tout va bien pour moi...et toi???
@AdenJay.2 жыл бұрын
Thank you for this guide. I did my 05 swift today without any problems thanks to this
@WMCS2 жыл бұрын
Excellent.. glad to know the video came in handy
@AdenJay.2 жыл бұрын
@@WMCS very much so, clutch broke a spring on the drive home Friday, got parts Saturday, fixed Sunday. No need to miss work on Monday
@F-Khan4913 жыл бұрын
whoaa!! Bravo my friend...BRAVO !! even watching the whole video made me tired... i can't imagine the amount of effort and consistency it takes for guys like you to replace the damn clutch : ( BTW, i own a same Swift...and it needs clutch set replacement now : ( ....
@WMCS3 жыл бұрын
You’ll be tackling your one now you’ve seen how it’s done ✅
@doctorbastard2912 Жыл бұрын
Fantastic video no need for commentary,you let your work do the talking First class
@messaoudaboudissa49353 жыл бұрын
اتمنى لك التوفيق والنجاح في كل ما تريد، كل الفديوهات رائعة ولها تصوير دقيق لكل المعطيات... شكرا جزيلا على كل المعلومات المفيدة عبدالرحمان من الجزائر
@marcozrx1100 Жыл бұрын
even with this amazing video, i still wont attempt this,, great job !!
@shalakakumarage5038 Жыл бұрын
Your video is really helpful and made the job easier. Thanks Kevin
@sony930z6 ай бұрын
De los mejores videos que he visto en en toda mi vida en KZbin, Gracias! Saludos desde Perú
@josevieiraferreira29114 жыл бұрын
Ate q enfim saiu video !!!
@DemRadulescuNae4 жыл бұрын
Top man! Thank you for your work!
@WMCS4 жыл бұрын
Thanks for the feedback...✨.., hope you notice the difference now.
@DemRadulescuNae4 жыл бұрын
@@WMCS yes, definitely a big improvement! 👍 I said some times ago that I will do it myself but, after I've discovered your KZbin channel, I realised that will be a mistake 😂.
@srpatnaik45483 жыл бұрын
Excellent DIY Video...Greetings from India..
@WMCS3 жыл бұрын
Greetings to you too. And thanks for Tuning in✨🍻🍻
@adamcrowley8387 Жыл бұрын
Thanks for the informative step by step vid, just finished one of the same.
@adamcrowley8387 Жыл бұрын
also needed flywheel machining
@foolsgold394 жыл бұрын
Really interesting watching you do that👍 surprised to see that the original clutch was a exedy clutch.
@WMCS4 жыл бұрын
Steven Exedy is normally the original clutch for the Far East cars as far as I’ve noticed .., you did really good spotting that ...
@danmuss816 ай бұрын
Thanks. Much appreciated. All went well. Well detailed video. Thank you
@WMCS6 ай бұрын
Thank you very much for the kind gesture. It’s been well received and very much appreciated. Kind Rgds. Kez.
@dylanthomas760 Жыл бұрын
Great video. Half way through ours so far. My old shoulders arent up to he-man lifting the gearbox back in like you have, but i cant get it to work on the jack either.
@daco542 жыл бұрын
So impressed , what a first rate video.!
@WMCS2 жыл бұрын
Thank you
@mathiasnewton.m1865 Жыл бұрын
Le mec est bon il fait ça en presque 1heures les yeux ferm. en tout cas merci cette video m'aide beaucoup pour réaliser la meme operation
@WMCS Жыл бұрын
Merci beaucoup..
@106662 жыл бұрын
Excellent video,top technician!
@satansoft Жыл бұрын
Excellent video for DIY mechanics :D
@flyjayUK2 жыл бұрын
Made it look easy. The kind of job I think I'll do in no time, then it ends up taking 12 hours over two days...
@finnice2 жыл бұрын
Thanks for the detailed video! Got to do this on my girlfriends Suzuki this weekend on the “driveway”. Good to know I don’t have to move the subframe or anything! How many Nm was the torque on the pressure plate? Three ugga dugga’s and a sinch with a 1/2 inch? Perfect! 👌
@finnice2 жыл бұрын
Shit I hope it’s that easy cause her clutch is fucked up! Hope I don’t need a new release fork!
@finnice2 жыл бұрын
Turns out the release fork was seized in its bushings so it was t releasing the clutch properly. Took it out, cleaned it and greased it. Put a new clutch in anyway. Wasn’t bad for on axle stands in the rain.
@dogsbody3473 жыл бұрын
Hi, I've not done a fwd clutch before but feeling pretty confident after watching this, thanks! I'm replacing the clutch in a 1.3 Ignis, have you done one? Do you know if there are any differences, aside from the battery tray and a cable clutch?
@Zenn.m2 ай бұрын
great video, very helpful!
@petemechanic82494 жыл бұрын
Hope youre well kev, not been able to watch as many vids as id like too as super busy at work. Keep it up👍
@WMCS4 жыл бұрын
Hi Pete .., always great to hear from you .,, hope you’re keeping well your end.
@foldonkivuli47435 ай бұрын
Respect Bro Üdvözöllek Magyarországról 🇭🇺😉🙋🏻♂️
@fernandopacheco24983 жыл бұрын
Gracias! Master.pura calidad Grande maestro. Desde chile , Chileno de corazón, 8_2021
@brad619celtic2 жыл бұрын
Hi Kevin! Very good straight to the point video. I was wondering if you remember where you bought the angle attachment for your impact gun and also the clutch plate holder you use?
@WMCS2 жыл бұрын
Clutch alignment tool off eBay. The 3/8 and 1/2 drive increase and reducer are from Sealey.
@drober0271 Жыл бұрын
Great video and looks straight forward to follow. I have to do our swift next week and just wondered how much gear oil did you top up with @51:40 Thanks in advance and keep up the great work 🙂
@drober0271 Жыл бұрын
Kevin thanks for your reply one question i wanted an answer on what was the fluid you drained from below and what quantity did you put back in. Thank you
@stnucynuffАй бұрын
Thanks for the video! It’s exactly what I needed to change the clutch in my wife’s car. I’m assuming a wheel alignment is required after this right?
@WMCSАй бұрын
Not required
@lisaberryman633 жыл бұрын
Awesome work mate! Thanks for sharing, I’m replacing the clutch in my M16a, first time doing it so see how we go. What was the tool you used when putting the new clutch in, Cheers from New Zealand 🇳🇿
@peterlattimore60133 жыл бұрын
Was a clutch alignment tool ...
@WizzRacing2 жыл бұрын
It's called a Laser Universal Alignment tool... Model 2646. About $30.00 US...It works on many models. No need for a Spline tool. That fits only one make or model...
@puntolibertad45874 жыл бұрын
Muy bueno tú vídeo abrazo grande desde Tucumán Argentina.
@raymondpinder36923 жыл бұрын
Thanks for sharing such a useful video
@raulsanchez2354 жыл бұрын
Excelent my friend very good video thanks
@WMCS4 жыл бұрын
Raul thanks for visiting the channel. Much appreciated
@mamen99 Жыл бұрын
Good video. Concise
@crni58073 жыл бұрын
Good job!!!!!Bravo
@WMCS3 жыл бұрын
🍺🍻✨✨
@gegegege78234 жыл бұрын
bon travail bravo comme toujours
@WMCS4 жыл бұрын
Merci beaucoup..., salut a toi aussi.
@csulokdog79923 жыл бұрын
Üdv! Nagyon profi vagy!
@tommyshelby40025 ай бұрын
Thanks for the video.
@titoracing6213 жыл бұрын
Sin duda un fenómeno,podrías decir referencias del embrague,gracias por tus videos me an servido para hacer embragues,un saludo
@shivkantsoni30162 жыл бұрын
Very nice and detailed video. Thank you bro
@howtofix10893 жыл бұрын
Fantastic!! 🙏
@WMCS3 жыл бұрын
Glad you appreciated the video. Thanks for the review
@LCRenardo4 жыл бұрын
Cool, il faut continuer comme ça 👌😉 J'ai pris pour habitude de remplacer les joints SPY à chaque fois. Qu'en pensez-vous ?
@WMCS4 жыл бұрын
je pense que c'est une bonne idée de le remplacer
@attlas759 ай бұрын
The best
@josebaldiviezo34103 ай бұрын
Gracias maestro
@flaviokonti55223 жыл бұрын
Too bad you havent checked the rear main seal behind flywheel. Btw also how did you block the engine from spinning when you were torquing the bolts on clutch pressure plate?
@crossercuss13 жыл бұрын
i need a new clutch in my swift... whats the cost not including the clutch and where are you based? thanks
@DB.Schraubergott8 ай бұрын
Geiles Video 👍 muss ich diese Woche auch machen gute Anleitung😂👍
@bristolratshooters99611 ай бұрын
Excellent video, helped me lots. Are the exedy clutches any good?
@manishpatel43564 жыл бұрын
Thanks good information 👍👍👍👌👌👌🇮🇳🇮🇳
@WMCS4 жыл бұрын
Thanks for visiting the channel Manish ...
@ayasarikol89094 жыл бұрын
Hello what kind of grease fat you use the red oke you did use is on the Volkswagen transporter t5 2.5 tdi nice work you do always
@philippebesnard36774 жыл бұрын
Hello Kevin, Nice video as usual. Is there a chance you do a Peugeot 208 in the near future ? Thanks.
@WMCS4 жыл бұрын
What year is it.? So I can have an idea of what the chances are to catch one.
@philippebesnard36774 жыл бұрын
@@WMCS 2013, 1,2 L, Gasoline. Thanks a lot.
@WMCS4 жыл бұрын
PHILIPPE BESNARD No probs. Give me a couple of weeks I’ll get one up.., in the meantime I have a few Peugeot’s on the channel. Have a little browse
@philippebesnard36774 жыл бұрын
@@WMCS Thanks Kevin, There is no urgency at all. Just a forecast 👍. Cheers from South of France.
@rabbithatethefox2 жыл бұрын
Hi Kevin,thinking of doing our Suzuki Liana hatch back.Just wondering about how long did it take you to do the job?.So I have an idea of how much a mechanic would take.And also if i did it im sure it would take 4times longer.Cheers.
@mateuszmateusz24913 жыл бұрын
Nice. Is there lot of rust underfloor of thats years Swifts?
@hurtrelsteeve25884 жыл бұрын
Bonjour tu utilise quelle produit pour le nettoyage de tes pièce continue comme ça pour tes vidéo
@WMCS4 жыл бұрын
merci pour le retour .. ,, il est nettoyant pour freins. ou tout autre solvant similaire fonctionne aussi bien
@axenz14 жыл бұрын
Wow, nice work...but I still afraid to it, especially reattached gearbox to the engine...looks very hard to align to fit in.
@WMCS4 жыл бұрын
It’s not too bad.., but I would get an extra pair of hand if I was you. Just to be safe.
@sofianeboukh4492 жыл бұрын
top video
@WMCS2 жыл бұрын
Thanks.
@sofianeboukh4492 жыл бұрын
@@WMCS i have one .
@criscuololello94Ай бұрын
During this operation will you also touch the air conditioning compressor??? After the mechanic redid the clutch on this Swift model, I noticed the noisy air conditioning compressor during loading, audible especially in low gears. As soon as I turn off the A/C everything disappears.
@SE35524 күн бұрын
Ac compresor is on the other side, no need to touch it for this job. Maybe what you hear is the ac belt tensioner bearing. I change it with every belt change they don't last more.
@lukelu9016 Жыл бұрын
For this car, can leaking oil from gearbox cause clutch not to release fully or not engage into first gear?
@WMCS Жыл бұрын
Most likely a worn pressure plate or clutch cable
@thegoldendon11 ай бұрын
Thank you so much 🙏 great video.
@greenmen20093 күн бұрын
Going to do same on 1.3, hope this is the same.
@stoiancostel51474 жыл бұрын
Hola amigos me gusta tu video un saludo de madrid ,
@WMCS4 жыл бұрын
Hola stoian..,, saludos amigos.
@302esky Жыл бұрын
Awesome video ...... Hi just a question I got my daughters clutch replaced and the clutch pedal is still the same as it was before the replacement clutch kit went in, The pedal takes up about 3/4 of the travel up from the firewall and it starts to grab, and to me that doesn't feel right as it should take up about 2 inches off the ground ..Is the thrust bearing not adjusted properly or something else as the workshop said its correct the way it is ..Well i don't think so cause it another year it would be slipping again as there isn't enough free play to travel on the kit for adjustment ..Thank you
@chrishard76162 жыл бұрын
It's great how you do this and video it all. Only question from me is what about using a torque wrench to correctly torque all the fixings. I don't see you doing this anywhere so how are you managing this?
@WMCS2 жыл бұрын
Same reason we don’t sea a grown man still being potty trained or crawling. At some point he has to stand up.
@mostezvan4 жыл бұрын
Fantastic, grt!
@taka9995554 жыл бұрын
It's amazing
@WMCS4 жыл бұрын
Thanks for the support and the review.
@hurricanhai3 жыл бұрын
Good work
@milanmilosavljevic69204 жыл бұрын
Nice work 👌👍👍💪💪💪
@westawesta90634 жыл бұрын
Hello my friend .good job
@estartermanual3 жыл бұрын
which degrease you use to clean? it's so good! Thnks
@WMCS3 жыл бұрын
It’s brake cleaner.
@-bollox8 ай бұрын
Why didn't you out grease on the input shaft/release bearing sleeve ?
@WMCS7 ай бұрын
.
@cocosloan37482 жыл бұрын
Great job !
@talat034 жыл бұрын
Bravo Kevin
@anant00893 жыл бұрын
which is best clutch for swift LUK vs Exedy vs sachs ? if price not issue? just need strong reliable clutch and best quality !
@WMCS3 жыл бұрын
I’d definitely go for EXEDY for those engines.. it cost slightly more but will last much longer.
@anant00893 жыл бұрын
@@WMCS ty
@maximsafonovooogorod5927 Жыл бұрын
Лучшее видео в мире
@WizzRacing2 жыл бұрын
Do you have to pay a core charge up front on them clutches first? Then return the old ones for credit back on them. Or do they even want the old ones back..Just wondering as I noticed you set up your work schedule for the week. In advance...
@zsoltboronyak50252 жыл бұрын
Super. Thank you.
@cestlavie7587 ай бұрын
Hey Kevin what were some systems that made you realize the clutch needed changing ?
@WMCS7 ай бұрын
Check my website for clutch symptoms www.williamsmobileclutch.co.uk
@Philunited Жыл бұрын
Hi I put a new clutch my Suzuki swift it’s hard to get gears only when I pull pedal a few times it goes into gear external slave cylinder give both?
@stuartbuchanan82033 жыл бұрын
Hi mate very helpful, did you remove the starter motor, having trouble separating gearbox from engine, any advice cheers
@WMCS3 жыл бұрын
The dowel sometimes gets jammed. Pry the gearbox with a lever bar.
@stuartbuchanan82033 жыл бұрын
Cheers kevin
@WMCS3 жыл бұрын
It will come out. I’ve had to sometimes get a flat blade thick screwdriver and hammer it in between to start separating
@stuartbuchanan82033 жыл бұрын
Cheers Kevin will give it a bang tomorrow lol
@maxautouk4 жыл бұрын
Wow, that's a lot of gearbox bolts close together, guess they couldn't fit in anymore huh? xD
@WMCS4 жыл бұрын
Tell me about it ..,, bolts holding bolts 😂😄
@gavey1004 жыл бұрын
Nice one mate
@WMCS4 жыл бұрын
Hi Gaviacon..,, always great to hear your feedback.., really appreciate it.
@scairoletsgetit52512 жыл бұрын
Hey Kevin what fluid did you pump into the bell housing. Am new to clutch replacements.