2007 Mercedes Benz ML63 AMG Tailgate (Trunk) Pump Replacement ( Resolving Issues )

This is a ML63 AMG . not a GL lol . Sorry for that mistake .

[@welsh-sub-zero6658]

There’s a tailgate height limiter in settings on dashboard

[@theshoptopauto]

Haven't seen that before. I replaced the tailgate struts and it fixed the issue

[@rsjyss]

Thanks for the detail video. What size bango bolts and washers? And where did you get them? Home Depot or the dealership? Thanks

[@evanhale4845]

You should be able to set it's stop height by holding down the red button I'm pretty sure

[@theshoptopauto]

No the struts were weak . I replaced them and it went all the way up. I appreciate the info though 💪💪

[@randolphrod9679]

that's right, not everybody knows everything, I'm pretty sure that was the issue. kzbin.info/www/bejne/hXbHi5yQqd-nhqs&pp=ygU3c2V0dGluZyB1byB0YWlsIGRvb3IgaW4gbWVyY2VkZXMgYmVueiBieSBob2xkaW5nIGJ1dHRvbQ%3D%3D

[@targa6sp993]

Im have same problems Replace new one go hafl way i try . Turn air out work and open one time and stuck hafl way again

[@user-lt2vh1yi3f]

Looking for signal relay

[@zorikkhaimov7349]

where can i buy fluid for the tailgate pump? I would appreciate it. and what is the name of the that fluid

[@ChrisLifts710]

Regular hydraulic lift gate fluid will work

[@BlackhawkPilot]

So much rust on the pump. Indicates a water leak that also needs to be addressed. I would also use dielectric grease on the connectors after cleaning to prevent further corrosion.

[@theshoptopauto]

Water leak was fixed, reason it's not wet. The stuff I used is good enough. 👍🏻

[@johnbautista219]

Can you give a website where you got the pump and where u got the computer

[@theshoptopauto]

I ordered the pump directly from Mercedes benz dealership. Cost about $450-$500 . If your looking to fix the issue temporarily you can order a cheap Chinese pump from eBay or check on Google. Might last forever with a China pump who knows . If your talking about the module, it's the same one that was in the suv. All I did was clean the terminal pins and connector . I used a liquid called Deoxit . It's a cleaner and protector for electrics .

[@johnbautista219]

I will buy the module from eBay but I want to know if I can still use the same module, I had my cooler on the back and it had a leak and I was wondering if I buy the new China pump and use the same module would it work 👀

[@hingtong5110]

Not enough light, the parts you're working on were all in the dark and black background.