2007 Tahoe All keys lost with Xhorse key tool Max pro.

Using the Xhorse key took Max pro to program a 2007 Tahoe key

[@BorisitoTores]

Thanks for the video 👍 Generally it says that 2 keys are required, but only one key just works as well, Sometimes it takes a few 1 or 2 minutes before working (I’ve done this on GM trucks only. Tried on ford but didn’t work) Also with the km100 even when you go to the add key process, it still erases the other keys, just as all keys lost.

[@Autodoc91]

You don't even need scanner You just leave it on for 30 minutes

[@Lock-Pick-Louie]

@@Autodoc91 That’s for vehicles with coded ignition cylinders. Not id46 immobilizers…. And for the coded cylinder procedure you don’t just leave it on for 30 minutes. You turn the ignition forward for 10 minutes, after 10 minutes you turn it back for five seconds and turn it forward for 10 minutes a total of three times for a total of 30 minutes. If you’re going to criticize someone, he should at least be right when you do it. 👌

[@555666jyd]

Lock pick where you at man no video's 😢😢😢

[@Lock-Pick-Louie]

Don’t worry, my man, about to drop a teaser video right now

[@8power0]

COULD YOU NOT HAVE USED A PIECE OF FOIL PAPER ON THE KEY WITH THE TRANSPONDER TO SHIELD THE TRANSPONDER IN THE KEY FROM THE ANTENNA COIL UNIT AND DONE THIS PROCESS ?????? I WOULD LIKE TO TRY THIS METHOD WITH A HYUNDAI ACCENT WITH THE OLD CUT KEY RAP IN FOIL AND A BRAND NEW DEALER KEY AND SEE IF I CAN GET IT TO TAKE THE PROGRAM . YOUR VIDEOS ARE VERY SHARP AND I APPRECIATE THAT THANK YOU FOR YOUR TIME AND EFFORT 🙏👍👍👍

[@Lock-Pick-Louie]

What fun is there in that?

[@8power0]

THANKS FOR THE REPLY , I NEVER TRY IT BEFORE THAT IS WHY I ASKED THANK YOU AGAIN .@@Lock-Pick-Louie

[@mohammadorabi2642]

Could you please use it to do toyota smart keys lost? I have it and it can generate simulator key with xm38 key! Could you try and tell us shoe us the feedback!! Thank you