2008 Nissan Altima 2.5 Step Motor Replacement Weak Acceleration

[@budgetdrift6403]

Let me know if you found this video helpful and don’t forget to like and subscribe! :)

[@herbduclos5599]

I appreciate you homie and i will

[@buckfam-jl2ks]

I can’t get my valve body back on... there is a pin it won’t line up with. We have taken it apart 5 times

[@budgetdrift6403]

buckfam 91616 ever figure it out? I’ve taken this valve body out a few times and never had an issue

[@papichulohoy]

Great info and picture quality, you just have to fire your camera guy cause he wasn't focusing on the items you were describing;)

[@budgetdrift6403]

@@papichulohoy camera guy was my dad lol I think he forgot he was filming

[@ccorrelllv]

Buddy, I'm a mechanic for 25+ years, you made this video and I am amazed how you explained everything so simply and on point! Props bro!

[@JohnDoe-ez7kl]

I own a mobile mechanic business and have one of these to do tomorrow and was werry about it, but this kid gave me positive thoughts on it now.. These cvts are pretty wild..

[@Reeeeeee12345]

@@JohnDoe-ez7kl How much you charge?

[@JohnDoe-ez7kl]

@@Reeeeeee12345 I charged $350 plus parts and fluid, part was $85 I beleive, and fluid from Nissan was $70+. Around $500 for complete job,

[@Reeeeeee12345]

@@JohnDoe-ez7kl ok I see. I'm gonna do mine soon. Car won't accelerate at all at times, it won't move. Other times it moves very slowly, and only starts working normal after it hits 20mph. Got codes stating solenoid is bad, stepper motor is failing, and speed sensors on transmission giving bad reading. Hopefully it goes well.

[@JohnDoe-ez7kl]

You got it, pretty simple job.. I've done many since..

[@GreyBBeard]

Excellent video. A trick I learned from a friend regarding the bolts. Get a piece of cardboard and draw a rough sketch of the valve body with holes punched in the proper places. As you remove each bolt, stick it in its spot in the cardboard diagram.

[@MrDarknight28]

Nice..

[@OLIVER949OC2]

Awesome idea bro

[@maniacslap1623]

Bet lol

[@007Evalyn]

I'm going to try this. Was wondering how to keep track of the bolts

[@30deand]

Any idea on what to do if you think you may have inserted the wrong bolts into the wrong slots? Is there a fix for this?

[@darrelloneal3489]

Sir, you are a blessing in the highest order. Your use of the small allen to retain the shift lever is simple and should be intuitive but intuitive in this case comes with a tall learning curve. While some may not understand or appreciate the value of your video but for those undertaking replacement of the stepper motor, it is simply enormous. Your commitment and willingness to help others are admirable. THANK YOU!!!

[@chonrubio7277]

From an older guy to a much younger man that rolled up his sleeves to do the job himself.. my respect to you Sir.. good job! Thanks for the video. I will have to do this to my sisters 07 Altima. Has the same malfunction as you explained in your earlier video. Thank you for the tutorial.. i think i can do it now.

[@JRene-my7ff]

Great video!!! After following instructions the car wouldn't go anywhere or shift into any gears. Afterwards, we realized the rod that's being held by the lever fell into the oil pan after unscrewing the lever without us noticing it. So, we found the rod in the bottom of the oil pan, redone the job and now the Car drives great. Thank you.

[@michaelparker6819]

Man you made what seems like a daunting task appear easy. You ROCK for sharing your mistakes and knowledge!

[@CnCEmpire]

This video saved me SOOOO much money! Replaced the whole valve body for around 300, every garage was around 4k with labour. Thanks for this awesome video man!

[@jasonrodriguez9926]

Thank you for providing this helpful video! It enabled me to successfully repair my 2008 Nissan Rogue. The tutorial's instructions on removing the bolts from the valve body were accurate. I took the extra step of labeling all the screws from the valve. I strongly advise wearing protective goggles, as it can be quite a messy job. Based on my experience, I also recommend labeling the transmission pan bolts to avoid any mix-ups, which I encountered. Additionally, I applied silicone to the pan and allowed it to cure for 24 hours before adding the CVT oil. I measured the amount of oil drained and added the same quantity. After starting the engine, I shifted between gears to ensure the CVT fluid circulated through the transmission. Initially, I noticed a bit of sluggishness in acceleration for the first few minutes, but after about five minutes, the vehicle ran smoothly without any issues. Many thanks and God bless you for sharing this invaluable video!

[@michaelboggs9378]

Hello Budget Drift! I just followed your direction on my daughter’s Altima and had complete success! And yes, a dealership wanted to replace the transmission due to the code. So thank you for your “straight to the point” video! Folks, this works!

[@michaelboggs9378]

I guess I spoke a little too soon. It worked for about a couple 100 miles or so and back to the same problem……geez! Thank you for the help though and well, I tried…….

[@michaelboggs9378]

I guess the valve body will be my next attempt…..

[@mattnick6970]

@@michaelboggs9378 I replaced the stepper motor also and it only worked for a few days. Did you replace the valve body?

[@michaelboggs9378]

Well unfortunately, Matt Nick, today was not a good day either. I now have replaced the valve body and I also could not get the car to accelerate to 2nd gear. Ran like a bat out of ---- in 1st gear and reverse but that was all……so disappointing as I have wasted money on a stepper motor and now a valve body that I had ordered both from eBay. Glad to those of you who’ve had success with this maintenance procedure. Nice video Budget Drift and well, I tried. Looks like CVT replacement for me…….

[@ridemfast7625]

@@michaelboggs9378 Maybe the stepper motor went bad? I always worry about using eBay parts instead of oem...

[@JoeTheWriter]

Hey there, just wanted thank you sincerely. The info you provided really helped us out in replacing the step motor, and we appreciate your thorough walkthrough. There were vital details you provided that other videos with more "seasoned" mechanics completely skipped over, so we really appreciate your professionalism. Kudos to you!

[@karamee78]

I tried to have mine replaced my a “seasoned” mechanic and he said it didn’t change gear at all after he changed it. Now he’s telling me the part needs to be programmed. I need help! Big help! Please. In Louisiana

[@gibson7654]

@@karamee78 there is an actuator that is probably unhooked on the valve body. It needs to go a certain way. He talks about it at 7:40.

[@oscarfigueroa1436]

Bro you are amazing. You taught me alot and save me thousands of dollars. Thank you for all that you do.

[@budgetdrift6403]

Any day my guy glad it saved you some money 👌

[@pakoobregon2880]

Bro where i find the model of my step motor on the transmisión?

[@firdavskhamidov6837]

@@budgetdrift6403 how many quarts of transmission fluid you put back in? Thank you

[@firdavskhamidov6837]

@Oscar Figueroa how many quarts of transmission fluid you put back in? And what type?

[@michaelmorris9007]

2010 Nissan Rouge. Code P1778. At first I was upset because my first crack at changing the step motor was unsuccessful. Car would only shift into Drive,No Reverse. Watched your video again and disassembled the valve body for a second time. Possible problem, I left a washer off of a metal cylinder tube that was center top of transmission, it fell off and I didn’t know where it belonged. I also think my Allen wrench was to short to keep the mechanism on the valve body in position to get full gear functioning. Second time around I used a really thin and long flat head screw driver. Thanks Again For your very descriptive video and much needed and appreciated pointers.

[@biswababu1]

Have the sane problem. Do you have pictures of the washer you are talking about? Thanks

[@carljenkins5092]

I received a post card in the mail that due to the lawsuit Nissan extended the warranty to 7 years or 84 k. Better than nothing I guess. I have a 14 Altima and a 18 rogue Great video. Thanks for posting it.

[@CeezTheBeast24]

Wow the most important part at 7:40 wasn’t caught in camera smh but still very helpful thank you

[@budgetdrift6403]

Sorry about that my dad was filming lol

[@TheMiloks45]

I have zero mechanic experience, but I followed this video step by step and my car runs like new after almost 2 years. You are my savior 👍

[@guiomartinez3470]

I go try to do myself to ...!!

[@sergiomunoz928]

Did you have to reprogram it after or no?

[@TheMiloks45]

@@sergiomunoz928 no

[@keiunneal915]

Did u have to buy the gasket piece

[@ajmcrae3716]

Solid video my man! Best one on here for changing out this part (really the ONLY one I could find). Simply wouldn't have done this without it. Thanks for sharing your knowledge after bumping your head so we wouldn't have to lol!

[@jeremiahjeromehenryphillip2079]

You did a great job bud, very clear and straight forward. I have a manual transmission though but same vehicle and I am happy to say I learned something new about automatic transmission.

[@ksr622002]

Manual trannys are best. I wish I could find one.

[@jeremiahjeromehenryphillip2079]

@Kaylene pretty hard to find. Can't tell you how much people wanting to buy it from me.

[@presleyrose-brinks9696]

Dude the tips and tricks you explained saved me from having to buy a new transmission, valve body, whole damn car, etc. You should be a teacher. I don't understand cars easily but I love to learn. You've explained this exactly how I needed to learn. Seriously, thank you so much for making me feel like I could do it myself without fear. You're amazing man!

[@josecolon9588]

Just paid over 3k to replace with 100k Miles and that's all it was. Nissan will not replace stepper motor. Thank you for opening my eyes.

[@geckocarpas]

They want to I pay 5500 for my and only have 110 k form 2013 rouge

[@jonahhall7452]

Hey guys, one incredibly vital part that he forgot to mention is to torque down the valve body bolts to the correct spec. DO NOT TIGHTEN THEM DOWN BY FEEL. YOU WILL OVER/UNDER TIGHTEN THE BOLTS AND THE VALVE BODY WONT WORK PROPERLY.

[@joevince6039]

How do you determine the correct spec to torque down the bolts? Appreciate any feedback!

[@jayhoody121]

Well whats the torque

[@edwardjames1369]

I may attempt this on a 2011 Altima 2.5S It has a code for the step motor problem. Thanks for the video

[@jakeevans8903]

This video guided me right through the process saved a ton of money!!

[@firdavskhamidov6837]

Hey, how many quarts you put back in?

[@valleryvillefranche7132]

Great video 09 rogue had to take down the valve body couldn’t have done without this video thanks bro 👍🏾👍🏾👍🏾

[@joserivera-vs7kw]

This kid is the best one i have seeing for the longest giving n details and how to do it . goes to the point how to do it . great job. God bless you..

[@ginamina28]

Hi, thank you so much. I've sent it to my mechanic, as you're the first person actually showing what I was experiencing!

[@electricrose5518]

Nice Job.... Great info.... Others say - "Just Replace Trans" .... You didn't. Great video

[@ridemfast7625]

Nice work!! The best are those who share their mistakes so others can learn.

[@kekeistheone32]

You are absolutely amazing.. I been going crazy trying to find out what's wrong with my car.. I thought maybe a tune up was needed... But I see now it's the step motor.. Thank you so much for this video!!!! Have A Blessed Day!!

[@macwilly9487]

Right, am having the same issue with my Nissan Altima

[@Reeeeeee12345]

Roastee

[@randomxfix334]

Thanks a ton, the video is really helpful and detailed. It would be a nightmare to do something like this without instructions. You have just save time and headaches to all of us trying to fix this transmission problem. Again thank you.

[@denisronchini2258]

Great video! I think the majority of the mechanics will just junk the transmission for a $30.00 part.

[@RobbieP2Vlogs]

Thanks for commenting on my stuff. Can you please refrain from putting nasty comments on my videos from now on? Please and thank you.

[@mikehubbard007]

Hey hey. Thanks for the video. After 2 years is it still fixed? Curious how it's holding up now that it's been a while. Cheers!

[@budgetdrift6403]

Hey mike ended up having to replace the whole valve body about 30,000 miles after this video. Sold the car right after so not sure how it’s holding up. Will never buy another CVT again lol

[@mikehubbard007]

Thanks for the reply! That's what I was worried about so I really appreciate the response.

[@Axel5sons]

Very informative and after i do this project i will let you know how well you taught me ❤

[@miasoculpa8490]

Wow great informative video. You can pull fluid out of the pan thru the dipstick. Typical Japanese cars ALWAYS have way more frame rust.

[@somegoatmeat6660]

Thank you for the diagram…I needed to know what bolts come out thank you sooo much

[@asemosley1]

Hey bro, I was really looking forward to seeing you do an after video of you driving, so we can see the RPMs on the dash, thanks for the video great work!🤙🏾💯%

[@budgetdrift6403]

I didn’t take a video afterwards but it was fixed and revved up like normal, I might upload a video showing it fixed if your interested

[@asemosley1]

Budget Drift Absolutely bro,It’ll be greatly appreciate it!😁

[@headake1981]

@@budgetdrift6403 hi my altima is doing the same but on top of the sluggish start its stuck in 2nd gear. Is this also a symptom

[@saintsunday9360]

@@budgetdrift6403 please do THIS BRO !!

[@stephenchampagne5763]

I have a 2010 maxima and the description at the beginning of the video where your flooring it and going no where similar problem but my code is p0746 pressure control solenoid “A” stuck off so I’ll be replacing the whole valve body that comes with all new solenoids. I searched for DAYS for solenoids it was way faster just getting the valve body and not to expensive $150 so it’s coming in Wednesday so I hope it works my buddy who worked at Nissan dealership told me to start pricing out new/used transmissions well I’ll spend 150 to see if it works because I’ve watched 4/5 videos with all my problems and it fixed it so fingers crossed

[@jessekautz138]

I did this but my car still broke and even worse lol now it don’t drive at all. Everything’s right besides I have this medal circle thing that I don’t know it where goes and i haven’t seen it in any other videos

[@richardspaulding5035]

Opened my first shop in 1977 (not trying to give away my age LOL) Wonderful no nonsense presentation. Great explanations & helpful tips. ChrisFix has nothing on you.

[@mylovecj07]

Once you fixed the step motor did it instantly start working or did it have to run a while before it acted normal?

[@ryanb6741]

do you know where are the fluid pressure switch a located and can they be service if a code is showed p0840

[@max1mys]

Dude, you are the best! Have the same issue with my 16 altima. 8 years have passed, they do the same shit

[@occckid123]

I have 363k miles on my 16 altima and haven't run into this issue yet

[@joseanmendez9719]

My Nissan Altima 2009 I'm driving the highway like 60 MI like regular . Ok y se cambio a Neutro by yourself . No River no , nothing like is stay N

[@charleswilson9480]

Thank you .. come and fix mine . I’ll pay you .. it’s very helpful.

[@lorriecarrel9962]

Your damn right I'll like and subscribe...I've been a mechanic for as long as I can remember and you sir was gifted a good brain

[@nycboyzindawoodz3159]

Hey just wanted to thank you for this video it helped me out a lot 👍🏽👍🏽

[@NoFaceNoCase]

My ratio control valve gets stuck doesn’t go in and out smoothly, the part that goes on to the stepped motor. The part that looks like a “T” could you give me some advice on how to fix that? Pls

[@macmotanooo]

I just finished and followed all instructions in this video and now looks like it has only 1st gear. Scanner it shows P1778 and P0868 low fluid pressure (2012 altima only took 6qts, not 11qts as shows in the video) What’s wrong?

[@macmotanooo]

Bump

[@rudypolanco2414]

Hi really like your video excellent I have 1 question which I need your assistance. I have a Nissan Altima 2.5 2004 starts good put in gear runs good all gears shift but the minute you stop on a speed bump or a complete stop it will not shift again will only runs in first gear. In order for it to shift I have to shut the vehicle down and start again then it will shift, but have to do it every time I stop. What can you recommend I can do. Thanks will appreciate your help.

[@redneck_3383]

I have a similar problem hopefully some one can help @ me

[@andrewgosainez6574]

I did not put the Allen key on the last step and I didn’t know what was going on but this videos a life saver

[@smallzgaming179]

What was happening after u didn’t put the Allen key in?

[@maniacslap1623]

Prolly wouldn’t shift lol

[@todslkdkd2127]

Hi, many thanks for this video! I need your help, would really appreciate. I have a different car, but same transmission. If you don't put the Allen wrench to prevent the linkage from the stepper motor from moving, what happens? Does it prevent it from shifting or the car doesn't move at all? I had the shop do solenoids replacement (one was stuck, the car wouldn't move), now it moves, but they say it doesn't shift. And there are no codes so far, as they say. So I've watched your video and realized that they might not know this. Thank you!

[@budgetdrift6403]

It won’t shift at all, basically like the car is stuck in park

[@ivanpatino9714]

Help, please! I followed the steps in the video, but now the car will not move fwd or back when I shift to reverse or drive. I did notice that on the video the rod was all the way in out next to the little lever with the 14mm bolt but on my car is wa all the way in.

[@mlk1216]

Mine too! Same symptoms, any remedy?

[@alexquezada510]

I have a 2010 nissan rogue cvt level is good but 80% of the time when shifting from P to R or D it shifts pretty hard, any idea if a bad valve body could be the culprit? (Mounts are good)

[@torredrakeford7825]

Just another piece of advice for you all. I replaced my stepper motor but it didn’t work. I realized I needed to change the valve body BECAUSE I noticed the ratio control valve/rod was jamming therefore not allowing the ratio to change. This also causes a 1778 code because the stepper motor is connected to it. So make sure the rod slides in and out without difficulty.

[@USUCKER1990]

What if it does

[@sidog]

Did u have to take it into reprogram afterwards?

[@torredrakeford7825]

@@sidog if you replace the valve body keep the same ROM (small black square box it’s the computer basically) from your original valve body. Switch out the little black box mounted on to the side and you will not have to reprogram it.

[@sidog]

@@torredrakeford7825 wow, thx for the quick response. I fwded ur reply to my mechanic in case he was unaware. Just like u I replaced the stepper motor first. Now I'm replacing the valve body. Thanks again for the response 👍

[@torredrakeford7825]

@@sidog No problem! Good luck!

[@jorgeperez-hy9vi]

Best video I've seen o this cvt I was looking for input on holding that swivel fork that is held with that access hole doesn't body know if that round pin that sits inside of transmission and wraps around by that swivel fork is that piece supposed to move freely or not

[@OLIVER949OC2]

This guy needs a donation from everyone taking this info it saved everyone thousands of dollars

[@tangoboy4jc]

You sure got the extra like from me thumbs up 👍. Please what do I do if there's no acceleration at all ?

[@RodriguezSteve]

Unplug your throttle body

[@angelsfororphans]

Excellent video. Very informative with lots of small details. One of the best KZbin videos. Enjoyed watching! Bravo!

[@deonfinch469]

Hey do you know if the process will be the same on a 2012 altima 2.5s

[@budgetdrift6403]

Same transmission so yes exact same process

[@gisellecedillo5047]

i have the same problem and same car did you try this ? if so is working good now ?

[@andrewwest5667]

Thx. Valuable info. Did you have to reprogram anything?

[@ericmartell816]

I swapped out the stepper motor and fluid along with cooler and it seems like it’s stuck in low gear only.car will speed up but the engine will rev to the moon if you let it, not slipping just stuck in low gear

[@budgetdrift6403]

Try replacing the valve body it’s a jf011E you can find new ones on eBay. If that doesn’t work you’ll need a whole new transmission

[@mjohnson0626]

Thank you!! I’m having the same issue in going to try this

[@budgetdrift6403]

Good luck! Let me know how it works out for you

[@alihussein1544]

Hi there I have same issues and did the same but nothing changed and I have same code any advice.?

[@budgetdrift6403]

@@alihussein1544 replace the valve body next, if that doesn’t work scrap it or replace the trans

[@brookebossey1956]

I'm curious about how long it took you overall]??

[@brookebossey1956]

@@budgetdrift6403 about how long does or did it take? I already ordered the parts and am ready to do the job I'm just wondering about how long I should plan for the video seriously

[@davidsizemore1452]

You know more about cvts than most mechanics!

[@johnbouchard4103]

Fantastic video. Procedure was spot on. My only issue is it stays stuck in basically 1st gear. Before it felt like it was stuck in the highest gear. Any thoughts as to what the issue is? Or what I did wrong?

[@seangyimah]

Fixed it?

[@davidsigmon3860]

Amazing video. You explain terrifically. Very intelligent. How did you burn your arms so bad man?

[@yonapops8062]

Who would thumbs down this!? I mean I got lost after the different size bolts but I admire ur tenacity

[@mohamedsalam7895]

Nissan and the dealership who will giv👎

[@yonapops8062]

@@mohamedsalam7895 facts 😂

[@A_Badara]

Hi, I followed this video which was very helpful in helping me replace the stepper motor. Mine worked after replacing the motor. However, after 6 days of working fine, the problem came back again. I'm getting P1778 code again and the Nissan rogue won't go faster that 55mph. Any advise on what could be causing the problem to resurface? I did notice that the variator which the motor is connected to wasn't moving smoothly but wasn't sure if that's normal.

[@mikered3242]

Thanks young.....gracias joven you help many people with you information....

[@felipevalles8041]

One year and you have all that Clutch dust and shaving metals at the Pan ,no wonder Nissan is going down the Toilet, Thanks for sharing your Knowledge 👍🏻👍🏻👍🏻😬

[@diyitall2023]

I had similar issues...being mechanically inclined I thought transmission right away...but in fact Nissan sentra 2015 have issues with the throttle body...clean your throttle body on your engine and it could be the solution...after 30k miles of this issue it went away when I cleaned mine

[@johnf.6942]

Good video! cvt fluid wasn’t Nissan cvt fluid . So as long as it’s cvt fluid it’s ok?

[@bjmuhammed4154]

Great Video, saved Thousands of Dollars... Thank You

[@budgetdrift6403]

Glad I could help! :)

[@Renegar87]

Great video!

[@billyyoder8171]

Very good job. Very well spoken. Have a blessed and safe week to you and your family.

[@budgetdrift6403]

Thank you :)

[@eliudkimaile]

thank you. what causes the step motor malfunction. I have replaced 2 in a span of 4 months.

[@dcrican762]

GREAT Job for a young kid. Next time use a large Tarp to Save your driveway.

[@slimslowhammertoes3222]

AWESOME VIDEO!!! Incredibly helpful!!! I have to replace the step motor in my 2014 Nissan Murano. Thank you also for the Class Action lawsuit information! I will have to follow up on that!

[@diavolow9]

Lonnie i have a murano 2014 also I changed the stepmotor but my car still stalls at acceleration were you able to fix your problem??

[@nikkilovesrocks]

🏁🔴🟠🟢🏁 Thank God I found this video!!! Yay! Yay! Yay!

[@blueobject]

Awesome video! My son's car similar issue and codes. Another time I would have tried this. Need to bring it in...

[@fistteam]

Spent $550.00 to have this stepper motor replaced in my daughters 2012 Nissan Altima with 158,000 miles on it…Essentially flushed that $550 🦌’s down the 🚽 as the repair didnt fix her POS CVT transmission!! Intermittently comes & goes, specially when on a hill! Any body have any other ideas besides replacing the transmission ($5-$6k) ?!? 😡

[@USUCKER1990]

Nice!!! mines is out along wt the pressure and temp sensor so imma swamp valve body

[@josevillalobos3325]

My 2009 Altima is doing the same thing but no codes. Was your car throwing codes, check engine light on?

[@aaronleon9417]

It's REALLY NOT that difficult. Most important tips, keep your hands clean, keep track of all the varying size bolts and where they go, TORQUE EVERYTHING back to spec, and obviously anticipate the costs to refill with fresh fluid. Christ sake don't use guess work on tightening 50 cent bolts on a 4500.00 CVT transmission. OH and don't be the idiot who uses their DeWalt drill to install the bolts, save the DeWalt for another day 😂

[@SOBXPogueLife]

Having these same issues with 2007 altima 2.5 s 277k miles, but it's not showing any codes. I've replaced both speed sensors on the transmission and the problem persists. Without the codes present, should I still try to replace the stepper motor and see if that helps or would you assume it is something else causing this issue?

[@v_jaek]

i did everything step by step and all gears were drive. i got back in and realigned the little lever thing and now all gears are neutral. i got back in AGAIN and swapped to the old step motor and i still have no gears. its throwing p1777 after changing it out and it was p1778 before changing. i dont know what to do

[@nevver]

I have codes for pressure control solenoid & torque converter clutch solenoid.. this will pretty much be the same job right? Will I need to worry about the Allen wrench thing replacing those? Any tips much appreciated

[@Clarencechapman]

Did not help my car. It helped a little bit but the transmission still slipped whenever put pressure on tranny. Ended up replacing it

[@RickEspana-b7l]

followed the steps, easy enought. car changes gear but it will not shift at all. did i miss something or i might have a bad step motor. will need to go back down to recheck everything. any suggestions will help.

[@damoncrowfeather4655]

Nissan has a problem.. I've owned two in the last 5 yrs.. First one, shame on Nissan.. Second one, shame on me. I don't recommend Nissan to anyone, because the CVT will fail. My first one failed at or around 80 thousand miles.. The second one failed just a few days ago, at 87K. It'll cost you around $3 grand to replace, and once the trans starts to slip, you'll get a P17F0 code.. which won't clear unless you can drive a cycle without the belt slipping.

[@budgetdrift6403]

Nissan CVT’s are absolute trash will never own one again

[@Martinnn_]

Question. I did everything here literally everything from numbering the bolts to the small L Ranch in the hole except after changing the stepper motor a couple of times I went with changing out the whole valve body but it still after the step motors and new valve body it isn’t catching gears. Any advice?

[@HamzaKhan-kj9wy]

you have to reprogram the valve body

[@budgetdrift6403]

@@HamzaKhan-kj9wy no you don’t

[@billmytko8398]

Hello, Have you replaced the sump filter as well as the pick up filter/screen?

[@paulkhazzaka6262]

Hi i changed the step motor, now i have the code p0868 low pressure fluid, and the trasmission is not shifting, it goes high RPM. At 20mile per hour iam at 6000rpm. Please help

[@sidvicious2323]

So when you take the pan off, is going to leak the 11 quarts cvt fluid you put in at the end? just making sure so i start to order the fluid.

[@joelshaw5604]

I have the issue with my 2010 Nissan Altima not responding to the throttle but it only happens after I've been driving for a while on the highway. Once I pullover and restart, it seems to reset (but it will happen again sometimes after getting up to speed). I haven't seen that code come up though. Is it possible the step motor is the issue even if no code pops up? For reference I currently have a catalytic converter code showing, but I don't think that would keep other codes from appearing. If it's not possible, do you know what else could cause the car to not accelerate? Thanks! Awesome video!

[@karlabanda27]

Hello my 2012 nissan altima is doing same thing did you found out what is the problem?

[@Kilinngthemkings]

I'm just amazed at how well you did this. Great job. Question 🙋... Could I change the whole valve body instead of just the step motor? I have a junk yard who has 2012 altima? Mine is 2010.

[@budgetdrift6403]

I ended up replacing the whole valve body about a year after this video, so not a bad idea to just do the whole valve body while your down there

[@susandailey7741]

How do u know if the value body is good from the junkyard ​@@budgetdrift6403

[@bryceostler1876]

Because of you and this video p1777 code is now gone!!! Thank you!!!!

[@primomorales3937]

Can anybody help me pls....got the same symptoms...car wont pass first gear......but no code...do you guys recommend me change this step motor on my transmission?

[@eventsnthings8536]

Look like same instructions as far as internal bolt removal applies to Rouge 2008

[@duranhumberto6322]

Wow just saw 11 qrt waaa I know this procedure works but Nissan recommended 5 to 6 is max guess it's a typo

[@avmaxmus6381]

I got the code p17f1 cvt judderr, but all my car has is a whining noise while idle that goes away when my car goes above 5mph.