2008 Pontiac G8 GT CAMMED IDLE, REVS, WALK-AROUND

Miles: 107k miles
Mod list:
TRANSMISSION:
Camaro Deep pan/filter
3200 Circle D Converter
Trans-cooler
3.27 Camaro Diff
EXHAUST:
-Kooks 1 7/8 Long Tube headers
-Solo Performance catback system
-No cats
ENGINE:
-Stock L76 6.0L V8
-DOD Delete
-Ported stock heads
-Little Lunati RCR dragmaster cam
-Upgraded valve train
-LS7 MAF sensor
-4 inch CAI tube
-RotoFab CAI
-Mighty Mouse catch can
SUSPENSION:
-Lowered on H&R Springs W/ FE3 struts
-BMR sway bar & endlinks
-4 piston brembos
- Braided stainless steel brakelines

[@Omrxiv]

As a g-8 owner I love your ride bro..... Clean.... Glad u kept the Pontiac arrows.... I have them my self.... G-8 life baby....🚗💨💨💨💨

[@boasadventure3127]

i just bought a 09 g8 gt for 2K the previous owner was convinced it was undrivable for thousands of dollars ( I told him it wasn't a serious issue before I bought it and he may want to get a tech to tell him the issues) but he said it had to go i bought a control arm and cleaned the internals ( about 400) in fixes and it runs perfect

[@roshawn1111]

wow thats a damn steal LOL i thought i got a good deal

[@deborahchesser7375]

@@roshawn1111 ain’t no way

[@dedorsett633]

Great car bro love everything you did to it. Bought my G8 GT off the showroom floor now has 125k and still running and looking great. Keep up the good work

[@DansModelBench]

That is the tidiest G8 I have seen on KZbin for a long time. Keep loving your Commodore.

[@mr.rem2609]

I love mine. 09 G8Gt. Black with same wheels and same interior. LQ4 swap. Cam, kooks, pypes. 400rwhp. So fun!

[@DonJames_]

Lol I love how the caption says, “music” while it’s idling 😂

[@Newtonboy23]

I love the g8, i also love how you have the halo head lights

[@princelightskin199]

I just love how aggressive g8 look

[@darvidlsx6.027]

Very clean 🔥

[@Robsgetinlit]

Nice build

[@heavensg8597]

Great car! You did so much right.

[@hallwayz1]

She sounds really good....

[@wodzimierzknapik6741]

Great car!

[@Datmopar757]

I love the G8 man🔥. I’m getting one at the end of this year. Can you possibly do some POV driving or something like that? I wanna hear that V8 scream when you get on the throttle 😂

[@kcbonez]

I’ll get something together very soon

[@harryfp1494]

@@kcbonez I’m also getting one I would like to know what kinda of mpg your seeing just easy daily driving it . I have an envoy with a 5.3 in it and it weighs about the same I only have front seats in it no door panels and it’s decent no cam yet just cai an no cats and straight pipes

[@kcbonez]

@@harryfp1494 I don’t drive it everyday but it’s about 12.5 mpg maybe a bit more city driving

[@angelthegnation4962]

I have a black g8 on ZL1 wheels I love mine it’s a v6 but super clean thinking about doing a swap in a couple of years my my engine give out but I love mine I’m also from Michigan

[@kyletyra6257]

I just got a built 2009 Pontiac G8 GT. It’s called and has long tube headers. Can kit is the RC Drag Master. It has stock brakes. So I need Brembos? They are so damn expensive. It needs so cosmetic repairs but for $14 I ain’t complaining! I won it!

[@jrrogersstang4696]

Music 🔥🔥🔥🔥👍🏿

[@MAD_BST]

did u address the rocker arm issue? if you didnt you might wanna look into it. your car has a similar setup to mine via the previous owner, however they didnt add the torque converter. long story short 30k miles later the trunnion needle bearings from the stock rocker arms came out and have been present in my oil changes since april. finally came up with the money to basically just put a better block in it. and its a nightmare. from one bro to another, if u need the CHE kit, shoot me a message. i opted to replace the entire stock rocker arm set with new rocker arms. but i purchased the che kit when i was first solo solving the entire afm lifter nonsense that basically triggers the trunnions to come alose easier due to how shitty the afm system is. the rocker arm job is doable solo and u dont have to remove the entire engine just the valve covers and torque em back down correctly. oh and look up the dude who makes the carbon fiber splitters on instagram lol. - '16 White SS

[@RemainNameless614]

Have you been to Columbus Ohio? I swear I seen you around here before cause of the license plate.

[@kcbonez]

No thats not me, but i know there is a guy in Ohio with this plate.. I found out he had the same plate right after i posted mine on a G8 page when i got it....but I like it too much to change it. LOL

[@dariusbaraiac]

What mpgs are you getting with the stage 3 cam?

[@JBB_123]

What’s the front and rear tire sizes? Any spacers and did you have to roll the fenders?

[@kcbonez]

255/35/20 F 275/30/20 R No spacers, rear fenders rolled

[@twanospano5293]

IS this red or orange. im blind

[@jacobtillett6284]

Are the wheels staggered? 8” front 9”rear? Or just 9” wide all around with wider tires in the rear?

[@kcbonez]

Staggered 8” Front 9” rear

[@GwallaMofasa]

How would I do something like that with my Pontiac Grand Prix v8?? Or what can I do get back to me.

[@kcbonez]

I would sell it and find a nice G8... G8 is better all around... I had a 2006 Impala SS with the 5.3 v8 (same as grandprix) FWD v8 just doesn't cut it. LOL

[@justinnelson1]

@@kcbonez lol the 4l60 is kinda doggy

[@jeffandras9231]

Do you want to sell it?

[@driver3025]

This is a VE Holden Commodre. There built in Adelaide South Australia. Everyone that works there are total stoner's. Lol. Nice car bro.

[@Eastbaystunna]

How much power are u putting down?

[@kcbonez]

Around 450rwhp

[@plumman53]

Are you using the stock torque converter?

[@kcbonez]

No, there is a 3200 circle D converter in there

[@kevinobrien4155]

do you find it drones bad around 1500-1800 rpm or not too bad?

[@kcbonez]

No not too bad at all for me

[@kevinobrien4155]

@@kcbonez I have the same car but wagon here in Australia with similar cam also but it drones heaps. might try 2.5 exhaust has 3 now

[@kcbonez]

@@kevinobrien4155 this Solo Performance catback comes with these J-Pipes in the back that help alot with drone, Iv drove with out the j-pipes on car and it was very loud drone but went away after j-pipes went on

[@kevinobrien4155]

@@kcbonez yeah i have j pipes on my non cammed 6 litre thats pretty well straight piped now and hardly any drone,

[@bigfacts9071]

How much rwhp?

[@kcbonez]

Close to 450whp

[@lunchboxsG8]

Lansing?

[@kcbonez]

No, not from there

[@davidtobon7892]

Would you sell it?

[@kcbonez]

Everything’s for sell for the right price

[@davidtobon7892]

@@kcbonez how much would you ask for?

[@harrietscott214]

PЯӨMӨƧM