Your a beast bro. You 20 minutes. Me. 3.5 hours and multiple trips to the auto store. Thanks for the video… very helpful
@davidoneill75546 жыл бұрын
those VW electrical connectors are a pain in the ass. Nice video!
@TheMdavila8255 жыл бұрын
anti seize will make the rubber boot swell cause the caliper to stick, you need to use rubber safe lube such as 100% silicone, also try lubing the caliper and piston instead of the brake pad, the excess that isnt touching the caliper will attract dirt and grime
@stevewilson78574 жыл бұрын
Thanks! You’re good at your job👍🏼👍🏼
@chooseyourlife98944 жыл бұрын
Thank you for kind words
@chriscase15626 жыл бұрын
Thank You, may this 100 degree a bit easier.
@nicholashewett9794 жыл бұрын
You said hex and I went to the store and got hex. Come to find out... I’m going back to the store for torx.
@mltmanlz28 Жыл бұрын
Curious... what do you charge someone to do the job you did in the video... labor, not parts.
@syncitycom77724 жыл бұрын
Nice video. Couldn’t have done it without you. Noticed your sensor wire holder was the silver bracket on top. It has a square cut out facing forward. The connector slid into that which you just put behind it. Not criticizing, just FYI. You helped me big time.
@fabiangarnica61933 жыл бұрын
Good video except for the noise air compressor🙂
@VT-pq2sg3 жыл бұрын
Just wondering if you wanna do pads and rotors for my 08 jetta
@ronsinson19893 жыл бұрын
Good job! Why was the rotors not replaced?
@daltonhannah30234 жыл бұрын
I have a 07 Rabbit same thing essentially. Some metal clip looking things came with the pads does anybody know where or what these thing are/go.
@cincokees6313 жыл бұрын
Thank you for sharing
@crownvic4053 жыл бұрын
really helpful thank you!
@125sm36 жыл бұрын
Nice one !
@iamaknightwhosaynee96254 жыл бұрын
what did you use to push that piston in with?
@rbo3505 жыл бұрын
I think your over tightening with the impact, try few seconds less on the impact and you should be able to turn the bolt a few turns with the torque wrench........have a good day
@GregThrasherTechGuy2 жыл бұрын
He's over-tightening with the torque wrench, too so it wouldn't matter.
@z596546 жыл бұрын
Good professional video - thainks
@montgreene2524 жыл бұрын
Where r u located?...
@TheGmanway5 жыл бұрын
On my 2010 Jetta se you can’t compress the caliper it requires twist and compress method
@spaace94143 жыл бұрын
1:22 I understand ur working fast but not the method I would use on my car, u can damage the rotor or piston