2009 BMW X5 CAS3++ (ISTAP) All Keys Lost using IM608 Pro2

If this content helped you, you can buy me a coffee or make a donation
You can also become a VIP member on Patreon to access exclusive members-only content, technical information, videos, and procedures
VIP members also unlock access to the VIP Discord chat room where users can get support from myself and a knowledgeable community
www.buymeacoffee.com/joedlock...
/ joedlocksmith
JoeDLocksmith - Automotive Locksmith and Technical Support demonstrating Automotive Key Programming Procedures
These videos are only intended for educational purpose and should not be used for any illegal activities.
UHS Hardware For Locksmith Keys and Supplies
Here's a $15 off coupon for your first order at UHS Hardware. To accept, use my referral link:
i.refs.cc/p6fUJtZs?smile_ref=...

[@jackgates6949]

Excellent vid! Notice that unlike most content providers, Joe lets the camera keep rolling without pausing it. This allows the viewer to get an EXACT feel of the entire procedure. If you're in a hurry you can always fast forward. I can't say enough about how important this is! Keep doing it that way, Joe!

[@terrellrackedup8631]

Totally agree

[@anassa6809]

Advice for everyone: back up eeprom and flash first because there is a chance of being corrupt after update... Happened alot te me

[@enrique89ll]

How can I do this just got this message to update on a 2015 BMW X1

[@anassa6809]

@@enrique89ll remove cas module from the car. It it not that difficult and do the add key process on bench. The module is under steering column

[@constantinnicolaescu5333]

​@anassa6809 when removing the cas... the battery should be disconnected from the car ?

[@anassa6809]

@@constantinnicolaescu5333 no doesn't matter

[@davidmuley164]

Perfect!!!...Joe, Can I do It White IM508????

[@Singh-pu9wr]

Joe you are smart ! Thanks, Singh

[@angkeyobd4395]

Thanks Joe , again .

[@mohamedokasha9116]

Good job

[@bumahmadmatar1197]

thanks you so much ❤

[@mohammadalamin208]

Sir make a video on Volkswagen 4th 5th immobilizer system lost key. Keep up your good work❤

[@abrahammartinez6075]

Good job 👏

[@mandybaker8544]

Thanks the Pro1 bricked my first Cas3++ but I see the Pro2 works better also if you pre process the key it will start faster. Thanks for the ballsy video!

[@constantinnicolaescu5333]

Next tine go for bench. A little less work, but safe.

[@Singh-pu9wr]

@@constantinnicolaescu5333 Agree

[@train4905]

Exellent😊😊

[@farajalhusaini]

well done sir

[@benjaminlevi7792]

Good job ❤ ❤ ❤ ❤ ❤

[@jullihoop]

A+

[@jackgates6949]

Joe, one thing that's slightly confusing? At 10:15 it prompts you for pre processing even though you're going to attempt via ignition switch. Then you tell it NO. Can you explain? What if you accidentally said YES? Why does the tool word it this way?

[@jab_locksmith]

What happens if you go through all 64 and doesn’t start due to another issue like fule or other issues but you can’t tell what attempt should start the car . Do you damage anything if it’s skipped?

[@myroad5469]

Hello plz WE don't must have in code to do akl cas3 + istap ?? Thank you

[@user-us1sf8id6u]

nice

[@Dike2011]

Joe brother, how are you able to key your hands steady videoing without any mistakes?

[@suzharrell6459]

I have a question please. My problem is I purchased a used 2008 5 series off marketplace with no start and the shifter showing stuck in park/neutral position issue. Meanwhile before I could get my scan tool ordered and here my puppy got a hold of my key fob and chewed it. I ordered a replacement key from used bimmerparts online they recommend I have the key flashed as a dealership won't touch it. I'm confused on how to approach this issue because I want to just buy the software/hardware and do it myself. What do you recommend I can do about this? Thank u in advance. Look forward to you answer

[@jorgemat8080]

Call a locksmith. Flash used key equipment is expensive, and then you still need to program the key to the car, which means buying more equipment. Just buy a new aftermarket key ( they are cheap ) and have a locksmith program it will save you a few hundred and a headache.

[@takalinos]

You didn't need power supply 13v to do it?

[@joepalovick1915]

Great video. Can the same operation be accomplished with an IM508? KM100? Thanks!

[@JoeDLocksmith]

not km100, im508+xp400 can

[@fusionfabworkx3538]

Thank you for these great videos, I'm new at this and I am learning so much with you...I'm working on a 2012 328i Cas3, how do I know if to choose semi-smart key or smart key when prompted?? It has comfort access but also a key slot, this is an AKL situation, thanks for your help

[@pouncerminned863]

Joe had a BMW class recently- you would have learned the answer my friend if you took the class

[@constantinnicolaescu5333]

The semi smart are the non keyless keys. Keyless one are smart keys.

[@simonmolina3725]

I have the same scenario.. but mine is CAS3+ i can't read the ISN from DME.. 😢 what can I do?

[@husainamin8377]

Were you using Gbox ? Can you do it without Gbox?

[@jkn2k]

Do you use a battery voltage maintainer? Which one ?

[@jackgates6949]

I bought a pair of HEAVY DUTY (at least 2 gauge) jumper cables and hook it up to my RUNNING service vehicle. For the longest time I used a CHEAP Chinese set of cables and never knew that my high failure rate was due to CHEAP cables.

[@tpedro94]

What if it has ME9 ecu ? U need a working key or a Isn. But only gives you short Isn not long in order to make a key

[@OscarHernandez-rj1dl]

When it says it has to be updated, is this the same thing as reprogramming it?

[@OscarHernandez-rj1dl]

No answer huh?

[@nderimmexhuani50]

Hello i have e70 akl edc16cp35 can i make on this way thanks give me short isn

[@ThatDIYguy862]

Hi, I am having an issue after programming a new used oem key. I can start the car with the key inserted but the buttons on the fob dont do anything. Any ideas why the buttons dont work?

[@constantinnicolaescu5333]

Did you renew it ?

[@ThatDIYguy862]

@@constantinnicolaescu5333 ?

[@KiaNooriComedy]

You in Los Angeles?

[@tomking3942]

Could you read the dme to get the isn ad not do the 64 start tries? Or was it one that was not accessible easy?

[@JoeDLocksmith]

Only if you do it by eeprom

[@samihaboudargham5657]

How can I know the frequency before I program all keys lost

[@JoeDLocksmith]

Look up by VIN

[@PavLockLocksmith]

​@@JoeDLocksmithcan you recommend website for it?

[@rebinrebin8993]

Hi frend wer you buy autel im608 pro 2 . Adresse site

[@lidorelkabets7600]

Where is the cas located at this car ?

[@constantinnicolaescu5333]

Search on KZbin and you will get your answers. Easy peasy

[@JCKDTV]

So it pretty much downgrades cas & says f cas4

[@makimaki4603]

Is it really this easy?

[@constantinnicolaescu5333]

Yes it is, but risky.

[@davidmuley164]

Hi, congratulations!!! Can IM 508 make lost key in a BMW? thanks