2010 Chrysler Town & Country WIN Module Replacement and Programming Keys too

2010 Chrysler T&C WIN Module Replacement

[@Gerald-sc8yy]

Getting ready to do mine 2010 T&C Limited 4.0

[@michaelaronowitz3761]

Mine did not make the recall either, I got the win module and installed it, but the mobile key guy gets an error message when he tried to get the pin code, the local dealer wants 50 dollars to give it to me! So right now I am stuck, the locksmith thinks the ECU is bad. If you can put play by play of the procedure for programing the win module to the car, that would be great. thanks maa

[@BMort852]

Sorry for the slow reply. I had to use a scanning tool. I bought the XTOLL IP616. You have to have the old WIN still installed to read the PIN, Then install the new WIN and when it asks for a PIN type the old PIN in and give it a minute to communicate. Check the video at 5min 50 seconds in to see the programming. If you are in San Diego, you could use my scan tool.

[@BMort852]

kzbin.info/www/bejne/qoXbeX-DocZ3d6s

[@DavidGomez-cf2fj]

Can you let me know what can I do please

[@BMort852]

@@DavidGomez-cf2fj Dave, it sounds like you need to replace the WIN module.

[@BMort852]

Mike, Sorry I'm just now reading this. You need to get the PIN from the old module before installing the new module.

[@DavidGomez-cf2fj]

Win module is bloked no more chances to reset it

[@DavidGomez-cf2fj]

Win nore chances to reset