2011-2013 Dodge Durango headlight assembly removal

[@MadPlumber-hf7wz]

Explaining the little nuances in "laymans" speak is what makes you an excellent teacher. Thank you

[@bobstarr2010]

This is the most thorough R & R video I have seen to date. Most You Tube mechanic videos don't show how to remove the fasteners and connectors, this one shows it all. Very well done!

[@MotorCityMechanic]

Thanks Bob. I put alot of work into these videos and its great to know that its noticed and appreciated. Again....thanks and make sure to subscribe.

[@kendallreed1711]

Great video. I’ve been a mechanic for 35 years and still check you tube videos for tips and tricks. Thanks for taking the time to make this video

[@javiertorres2247]

Awesome thank you! I just replaced my headlights! Had to watch your video 3-4 times. Was able to replace my new black headlights in less than an hour 👍

[@MotorCityMechanic]

Many thanks Javier! Glad that the video helped. Make sure to subscribe.

[@brianbaker2530]

Thanks so much for this tutorial! Really saved my arse while visiting my son 12 hours from home and my passenger side headlight went out. The only thing different in my experience was that I didn't have to drill out those 2 plastic rivets holding the fender trim in place, I was able to pry it out with a flathead screwdriver and a pair of needle nose pliers. Other than that, exactly as described. Great job!

[@dsim3211]

What a job just to take the headlight out! I tried replacing hid bulb in 2012 rt through the access hole in the fenderwell and broke the bulb. Considering this but cant believe how difficult it is but you did a great job explaining how to!

[@MotorCityMechanic]

Yeah I have skinny arms and wrists and I catch hell so I can see the struggle for sure. Thanks for the comment about the video and for watching. Make sure to subscribe,

[@stephenreed4794]

Excellent video!! I was able to replace the headlight assembly on my wifes 2011 Durango and there’s no way I could have done it without watching this first!!

[@knockidov]

I am so glad I watched this, made it a thousand times easier. Thank you

[@jeffpmeyer]

You're the man. I have this exact vehicle right down to the color and I needed to take the whole front end apart to replace the PS cooler. Without your video I'm sure I would have snapped some fasteners off without knowing they were there. Thanks!

[@MotorCityMechanic]

Your welcome Jeff. Let me take the time to tell you thank you as well for watching and for the great feedback. Glad that the video helped. Make sure to subscribe

[@colddeadhands5167]

Very thorough video. Nicely done, young man

[@mcprodj76]

Thank you for taking the time to show all of us.

[@MotorCityMechanic]

Thank you sir for commenting!

[@davidtierney581]

Awesome video, being arthritic, I guess I'll be taking it to a dealership to have it done. I already bought the two assemblies but there is no way that I could do the replacing. Thanks for letting me know that I am insufficient.

[@adamR1984]

This comment made me laugh out loud as I’m in the same predicament

[@Showandperformance]

Thanks for the great video. Any idea where to get the assembly for the HID headlights? Mopar doesn't have them.

[@MotorCityMechanic]

Thanks for the kind words. Not too sure on that part availability. Typically I get the part number from the parts department at the dealer and then google it to see if there are any other options or placed that might still have on hand. Thanks for the question and make sure to subscribe.

[@EscobarMT]

Calibration process since you remove the headlight assembly? Thanks bud

[@vipergg9159]

Wow , what a pain just to remove or replace a headlamp module. You wonder what they are thinking when they are making these things . On my Envoy you lift 2 levers at the top of the light and the whole assembly comes without removing anything else .

[@89imp03]

This video helped out a ton! Just finished doing some halos in one of these

[@MotorCityMechanic]

Many thanks for watching and for the comment. Glad to see the video still helping people. Dont forget to subscribe.

[@freddemmon6206]

Incredible detail to the procedure…THANK YOU

[@ninorender2246]

Hi, There, just wondering do I need to replace my assembly . The right front passenger blinker is blinking my left off light in my Dodge Durango RT 2013. It’s weird . Thank You

[@swood248]

thanks for the videos....does this apply to the 2015 Durango as well??

[@TheBlackcatfeline]

Really good job dude, probably saved me over $200.pretty much went just like you said to do in the video! Thanks for the help

[@MotorCityMechanic]

Awesome! Always glad to help save money. Make sure to subscribe and check out my other videos.

[@MiltonAtay]

Just watched it for the first time well put sir Thanks

[@emiliogonzales2702]

Thanks for the video, I have question, on my r/t durango, if I wanted to switch from hid to halogen, could change the assembles

[@newwav]

Do u think it's possible to upgrade to the 2014 head lights by simply adding the bottom brackets that come off the 2024+? Thanks

[@andyandy8299]

Do you have a video on how to adjust the headlight? I need to adjust mine up a little.

[@MotorCityMechanic]

Not currently......maybe as a future video. Make sure to subscribe so that you get notified when videos such as that get uploaded.

[@junebugmama1]

Awesome video. I have a question. I have a Dodge Durango 2012 Citadel. I am having a difficult time finding chrome passenger headlight assembly with a module. My mechanic who I would like to install it has been unable to find one either. He said biggest piece of advise is if I find it make sure it has a module. What is a module and how does it look? I did not see you mention a module in your vehicle. Thanks in advance for your help!

[@csanchez5886]

thanks for the video it was great tutorial. i would like to add for 2014 and 2015 durango grill and bumper is 1 unit assembly.

[@MotorCityMechanic]

Thanks Carlos both for the comment and added info. Keep watching and make sure to subscribe

[@GregMills-p9i]

you made this super easy. Thank you.

[@stevemcdonald6440]

Hi David... 2012 dodge durango citadel.. Took my front apart like you showed..no problem.. But the headlight assy that's on this model has a low beam power plate of some sort in original assy and replaced ones ordered from car parts Inc doesn't seem to be same on back bulb type re assembly.. Anyway will maybe send pics on your email.. Thx Steve

[@samlion9702]

thanks a lot for your nice video,I was wondering if i can change durango 2013 headlight assembly by 2014 lead ?? appreciate your advice .

[@MotorCityMechanic]

Sam Lion I haven't tried that swap yet to know if it's possible. So I can't say yes or no unfortunately. Wish I knew so that I could help you. Thanks for watching and make sure to subscribe

[@reconcilingroyalty]

Hello, do you have any information on the acc on a 2011 Citadel? I have had everything replaced at the dealers request, and it's still doesn't engage when I press the set button, it does everything else as far as fwc is concerned, it recognizes what I'm trying to do, but will not set.

[@michaelalambrano-may8101]

Thank you so much for this video it was so easy to replace my headlight...

[@MotorCityMechanic]

Always happy to help Michaela! Thanks for letting me know how things went. Dont forget to subscribe!

[@chriswalton1290]

2012 dodge durango rt Hid lights what would make the driver side headlight turn blue.

[@brandondieter]

Great video, is the 2016 Durango the same? I would guess it's similar to the 2014 that you had commented on already. I purchased a 2016 Durango R/T and the front bumper fascia has something under it from the factory. The is a dimple near the top center of the cover. The dealership said they would fix it but I would have to drop it off at there body shop. No thank you!

[@FreeSmokeEA]

Will the 2014 headlight assembly fit on a 2012?

[@staffordmcfolley2785]

A real technician...thanks

[@MotorCityMechanic]

Your welcome and thanks for the kind words

[@GlennCrinerLA]

Can you put 2014 version headlights on the 2013 model??

[@rmar7081]

Nice job!! Very rare to see.

[@watchandjewelryloft4713]

I looked up your video to see the wiring harness for the low beam. Since it's dark I didn't want to run out there again. But, I have a 2011 with the low beam harness that has melted. I have bent the connector over a few times to get it in contact, but I think it's done for. It's the driver side. And has the 2 part clip that you show in the video at 12:43. Where can I get this part, or is there a better fix? Seems like heat is just going to melt it again. Thanks.

[@MotorCityMechanic]

I have seen the 2 wires connector terminals melt before. We found that its a common connector and used on other brands of vehicles as well. The local auto parts store had one in stock the last time we had that issue. I dont remember the part number at the moment but it worth calling them and ask for the bulb and then see if there is a repair connector for that same bulb. If so then make sure to solder the newer connector wiring in place and use weather proof heat shrink. Hope this helps. Here is a quick search that I did and what I found. See if any match what you have. www.oreillyauto.com/site/c/search/Headlight+Connector/01514/C0189.oap?keyword=connector&year=2011&make=Dodge&model=Durango&vi=1447822

[@watchandjewelryloft4713]

Looks like they have them. $14.99. I'll go pick one up. Thanks so much. I had a 2007 Acadia with the same problem. GM Recalled it though. Not seeing any recalls for the Dodge. Why are these prone to doing this? I can understand heat build up, but are they shorting out to cause this? Seems dangerous as well.

[@MotorCityMechanic]

I have only seen one so far.....but I remember it well enough to know about the connector. Glad to see it will be a cheap fix.

[@DanMWhiteEagle]

Can i do this same process with a Dodge Durango 2014? Is the same?

[@brendagutierrez828]

Do you know if the 2014 headlights will fit a 2011 Dodge Durango?

[@MotorCityMechanic]

What what I can see by part numbers....no. To be certain I would have your local Dodge dealer look up the two year models and see if the same part number using your VIN #. I have limited access to that but from what I can see.....looks like only 2011-2012 and possibly 2013 are interchangeable....just dont quote me on that. Thanks for the question Brenda and make sure to subscribe

[@vipergg9159]

@@MotorCityMechanic The 14's went to projectors so they would be different parts and dont know what things are different .

[@germanbahena2048]

2011 Dodge Durango electrical problems all the warnings lights on dash came on.Wipers on also No code at Autozone when checked What is the fix for this?

[@MotorCityMechanic]

Sounds like a communication issue.....when there is an issue the wipers will come on and headlights so that worse case scenario you can still drive at night and in the rain. Sounds like there code reader doesnt check all the control modules. Most likely a code is set somewhere in one of the modules. It takes a high end scanner to access all the modules and to check for codes. Its not an easy thing to check and the causes could be any of the modules and any of the wiring.

[@WHPCRepair]

your an excellent teacher. thanks for this video.

[@MotorCityMechanic]

Thanks Wiley! Glad that I can help and that people are welling to watch and learn! Make sure to subscribe and check out my other videos.

[@810goodfella8]

You guys rock for this video! ✊😄

[@idigbebop]

Ridiculous poor design to go through that level of removal to replace everyday use bulbs. That should be a deal buster for any future Durango owners. The new 2019s I looked at appear to have the same buried lamp housings. Great video on the disassembly, though. But damn that is irresponsible for Dodge to accept that assembly to continue.

[@MotorCityMechanic]

Evening.....there seems to be some confusion. The video was actually for the headlamp assembly (housing). You don’t have to go thru all these steps for the bulb replacement. Thanks he bulbs are accessed from inside the engine compartment. It’s tight but doable. Thanks for watching and for the comment. Make sure to subscribe

[@YoungWorld89]

My headlight stopped working i changed the bulb and it still doesn’t work. Any ideas anybody or videos on how to fix?

[@arnaldomercado8108]

I made it very easy follow the step bt step video. Thanks.

[@johancharriz8817]

a million thanks awesome video very great tutorial.

[@MotorCityMechanic]

Well a million "your welcomes " to you Johan. The great feedback is always appreciated. Make sure to subscribe if you havent already.

[@johnbarenberg1633]

Very well done, thank you!

[@MotorCityMechanic]

Your welcome and thanks.

[@deltabloo]

Awesome tutorial thank you

[@jesusbaez4427]

I guess the same applies for a 2017 Durango need my front right light assembly replaced but Damn it looks like a pain especially with the lack of time i have but i was a really great detail video

[@pyronmasters]

Had no idea it was such a pain to replace the headlamp.

[@MotorCityMechanic]

The bulb alone isn’t…..but the housing is a different story as you have seen

[@CaptainLeonsBoatingandMore]

Excellent video, horrible engineering by Dodge. Too much work to replace a lens that is filled with moisture. Thanks so much!

[@MrAhkhan89]

These headlights were better than 2014-20 with separate high beam bulbs

[@yofields4569]

When it reads major mis firer, and you done changed spark plug and the cores

[@jruiz0305]

excellent video. Where did you get your push clip removal tool?

[@MotorCityMechanic]

Thanks for the comment and question. Here is a link to my amazon store......check out the body/interior tool section and you will see both the metal and plastic tools.

[@MrGkoa808]

Thanks Great video

[@SuperAaronbennett]

How do you replace the thermostat / temp sensor in 2012 Durango?

[@MotorCityMechanic]

What size engine are you asking about?

[@SuperAaronbennett]

I have the 5.7 Liter V8.

[@christianmoreno2070]

ProphetZer0 I want to know the same

[@MotorCityMechanic]

The thermostat is located where the upper radiator hose attaches to the engine. Its a matter of draining the coolant.....removing the upper hose from the engine and then removing the 2 13mm bolts holding the housing on and then remove the thermostat. The coolant temp sensor threads into the timing cover usually near the top.

[@kristinastuart9990]

Man you are the damn 💣 thank you!!!!

[@wfrankg4081]

Great video.

[@allcountydoorrepair7225]

Thank you

[@MotorCityMechanic]

Your welcome. Subscribe and check out my other videos if you haven’t already and Merry Christmas

[@rubyrivera872]

Thank u

[@MotorCityMechanic]

Your welcome!

[@mikyahl8749]

Good Video

[@christopherbell7159]

hey thanks a million in found a video I have to find that link it's through the fender wall way much easier

[@MotorCityMechanic]

+christopher bell Thanks for the info. I will have to work on making a video at some point. Much appreciated

[@TheHepeete]

Thank you for this!

[@MotorCityMechanic]

Your welcome and thanks for watching. Make sure to subscribe and sorry about the delay in getting back to you.

[@inprogress9655]

Hello i got a 2013 durango i got a code P0730. is it a costly repair?

[@MotorCityMechanic]

The price will vary alot.....it could be simple or require a trans overhaul or replacement. The first step is to check the trans fluid level to make sure thats not the issue. Otherwise the code just says in what gear the issue happened and not what caused it. Its a general code and not very specific.

[@chuckgripp7209]

You already know why im here! Got a set of HIDs and the guy who installed it cut the holes too big and water got inside my unit and my led strip went out!!!!! 😡🤬🤬🤬

[@thedroneosphere1760]

David can I email you still

[@Celexanomnom]

This 2013 Durango is the stupidest design ever. The whole freaking thing

[@yerwrng]

I was going the radiator on my R/T and luckily the grill will go forward just enough to access the radiator support and then allow removal and install of the fan and radiator. I also noticed that all this bs with removing the front clip would be necessary to swap a headlight assembly or grill if you decided change those unlike my old commander which to hear things can gotten off with so much bs...thanks engineers...you suck !

[@yofields4569]

Major mis fire

[@spazzreid204]

Hes doing too much work to change headlights. Thats why hes charging an arm and a leg. Not happening sorry buddy

[@MotorCityMechanic]

The video is about the headlamp assembly.....not the bulb. This is the only way to remove the housing to replace it. The bulb is much easier. How do you know what I charge? Lol

[@MotorCityMechanic]

I need for her to stop that. By the way.....stop drinking my beer when you come by or at least replace it with something better

[@kwamepeters5021]

Is there any difference installation with aftermarket headlights?

[@caremelgurl254]

Hey I have a 2015 durango and my DRL/parking light stopped working they tell me I have to get a whole new assembly for driver and passenger side. I got stuck in the corn field on my way to work and messed up my thermostat I got that fixed co e to find out my DRL don't work now why can't I just get another led bulb for DRL and where exactly is it too change cause the whole assembly runs about $200 and up for one I'm hoping it's just a simple fix to be honest

[@kevinheiter1447]

Is the 2014 any different?