2011 Dodge Durango brake booster replacement

[@DoubleBogeyGolf_]

Man my 2011 dodge Durango some trash finally good to see someone doing videos on them

[@curtisnstacey]

oh yea for sure my man!!! i had to put a cam and lifters in mine few months ago. big big job but i got it done. old durango are good rides. just gotta keep up with them like other things i guess

[@JaydenLarson-x2i]

I just got done doing one of these in about 30 minutes without taking the lines off the master cylinder First I put the new booster in, don’t bolt any of the four nuts on cause you’ll want the booster to be able to move so you can slip it onto the master cylinder. Once you are able to fight it on there and get the two master cylinder nuts on, you can then line the whole assembly into the four stud holes and push it through the firewall. I’d recommend a helper to push it while you get under the dash and start a nut or two.

[@curtisnstacey]

@@JaydenLarson-x2i I so wish I could have done it like that. I don't have any friends that'll help. I thought about loosening the 4 nuts back up and doing it like that but I'm a big guy and getting underneath again fighting with that wasn't worth it to me. Next time I won't tighten the nuts up on the booster if there's a next time. Lol

[@JaydenLarson-x2i]

@@curtisnstacey I don’t blame you, those top two bolts down there were a pain! I actually ended up wedging a pry bar to hold the booster/master cylinder close enough so I could get a nut started. I also hope there isn’t a next time what a pain lol

[@shirleymedling8503]

So we replaced the brake booster and the master cylinder. When I say we I mean my husband lol, however we still don’t have brakes. I did watch the video about the brake lights and fixed that one myself. I was pretty proud lol. Can you give me any ideas for the no brakes?

[@curtisnstacey]

@@shirleymedling8503 if he disconnected the master cylinder from the brake lines then you'll have to bleed the brakes. It takes a while to bleed all the air out, more than you'd imagine, took me several times. So you have no brakes at all even when it's pressed all the way down, they don't bite at all?

[@shirleymedling8503]

@@curtisnstacey he bled the brakes twice before it got to dark on us. He also did the bench bleed on the master cylinder first. No he has absolutely no brakes but the emergency brake works.

[@edgardorosario424]

Gracias

[@curtisnstacey]

no problem at all

[@andycuevas95]

Omg😂

[@mikebernard1252]

We need a video of you actually installing the part not talking about it

[@curtisnstacey]

take what i said in the video and the things i showed you and use some brain power and get the job done.