2012 Chrysler 200 headlight replacement

how to replace the headlight on a Chrysler 200 in 3 minutes.

[@Chaveyb]

Great video! Replaced my wife’s passenger side headlight this morning. When rotating the light to get it out, I rotated it down towards the passenger wheel. Pulled it out and unclipped the light. When putting the new light in you’ll feel the groove the light slides into. Once in the groove, have connector at the 6 o’clock position and rotate to the 9 o’clock position to lock. Put the cap back on/washer fluid fastener and you’re good. Thanks again for the video!

[@kristibell1975]

OMG! Just did both passenger and driver's side on my BFF's 2012 Chrysler 200 with no problem whatsoever using this method. Thanks heaps! Having smaller hands made this a breeze!

[@mynamemoney8792]

This should have a million views

[@SLBruno]

👌🏽 Wow, I've watched several other videos removing the bumper. I always said there had to be a better way to do it. Great idea!

[@AngelaDay-bl1qf]

Thank you so much for this informative video. I live in Canada, and I took my 2012 Chrysler 200 to the dealership and they want $800 plus tax to replace the light. Am I missing something here? It's the drivers side light. After seeing this video I think I'm being ripped off to the heavens! I have small hands, so would love to attempt this. Can I go to any automotive place and get a replacement bulb? What should I be looking for? Thanks to all for any comments and suggestions!

[@kristibell1975]

You can get the bulb at any place like Auto-Zone, and you can feel the cap better than you can see it. If you try one and it's the parking light (orange) you just need the next one over for the headlight. For the driver's side, it will be farther to the right than the parking light is. My BFF and I just did hers and it was super easy, took maybe 15 minutes at best. I encourage you to do your own!!!

[@billyhw5492]

You are a hero. \o/

[@cadytebow9507]

My land's! That was a b****. But way easier than any other way I've seen. Thank you so much!❤

[@cadytebow9507]

***don't drop the cap! 😂

[@davidmiller8030]

These damn "car" manufacturers are crap today. I remember having a Saturn SW2, the headlights were very easy to get to. I practically didn't even need to bend over. It would literally take me less than 30 seconds to change a headlight.......now you gotta put your arm near the alternator bend your arm to the left and stretch towards the back to change a damn bulb

[@Ambergris24]

Every video is the passenger side that everyone has ever made. I came to you tube because it’s my passenger side bulbs that went out. They put bulbs in at same time at manufacturer how does one side go out and not the other ? Seems like a defect or something with these mid 2000’s Tourings and 200 models .

[@kevinmaloney3550]

Can that procedure be done on a 2013 Chrysler 200?

[@mattmurdockthemanwithoutfear]

Thank you explained it the best saved me a lot of work

[@bradackermann1613]

How about driver's side headlight? Same process?

[@kristibell1975]

Easier, because there's no reservoir in the way.

[@JohnDoe-il8py]

Same on the bulb. Slightly different process of squeezing your hand in.

[@Isaac505Angel]

Having an issue getting the bulb out lol anyone else have this problem. It gets loose but just won't come out

[@MarkelS92]

Same here