2013-2017 Focus ST Velossa Tech Gen 3 Ram Air BIG MOUTH Intake Snorkel Install and Review

2013-2017 Focus ST Velossa Tech Gen 3 Ram Air BIG MOUTH (w/flare) Intake Snorkel - VT-BM-001 - www.stage3moto...
____________________________________
SUBSCRIBE AND FOLLOW
YT Subscribe : / @stage3motorsports
FB: / stage3motorsportscom
IG: / stage3motorsports
Webiste: www.stage3moto...
Enter Stage 3’s latest giveaway: www.stage3moto...
Never miss a thing when you join the Stage 3 Newsletter: www.stage3moto...
Grab a Tee Shirt or Sticker - www.stage3moto...
Music licensed from www.soundstrip...

[@dham99]

One of the only upgrades I have yet to do to my 2016 RR ST. If someone's watching this wanting to upgrade other things that make big a difference (under the hood)...I'd HIGHLY recommend the Redline Tuning hood struts that replace the stupid factory prop-rod to hold your hood up. ZERO drilling, bolts in. Only modifications are to trim the plastic where the strut lies when its shut. Worth every penny. I also did the FSWerks front stability bar, simply bolts on to the control arms. There are a few little things that go a long way, things that Ford should have done from the factory lol. * a note to keep in mind when upgrading intake components...if driving in rain/large puddles, keep off the throttle as much as possible. Any chance water can get directly into the intake, you're gonna have a bad day. There's a reason there are baffles and channels protecting the engine from air entering directly..though it robs us of some power.

[@matiasgalarza1985]

Hi Friend, Great video, I thank you infinitely. I also bought the same piece and I was wondering if there really was another way to place it without having to take apart the entire front... Anyway, I wanted to ask you, can you tell me the size of the screws you used to make it firm? I would really appreciate it if you could help me and thank you for your video! Matias from Argentina!

[@CrazyUnicorn48]

Love how he balances the skid plate on his head to lower it😂

[@jessebudelman]

You can install it also by removing the grill and radiator/engine shroud on top of the bumper. 2015+ models only

[@bdambrowski]

If you have to take the bumper off, I would do the FMIC at the same time (since you have to take it all apart for that one as well). I think that is my next project for my 2017 FOST

[@lukescholey5872]

I have a 2017 Focus ST. The front bumper removal is not required correct? How long would the install time be in that case since you can just install by removing the front grill?

[@cccraigslist]

Great video guys! Very easy to follow along :)

[@matiasgalarza1985]

Hi friend, how are you? I appreciate your video. I bought my intake but I don't have the screws. I wanted to ask you if you know the measurements of the ones that came with the kit and the measurements of the rubber spacer so I can make them. I would really appreciate your help!!

[@bigstylecreations]

I'm thinking about fitting this as well as the hella horn supertones to the left of the snorkel. You think I would have to do the grill shave?

[@stage3motorsports]

It would be a tight fit, not too sure.

[@MHZookario]

What did you end up doing?

[@6z0]

IF you have a facelift st (15-17) then you DONT need to remove the bumper for this install.

[@amdsixtyfour]

what headlights are those? they look great and its been a pain to find good looking aftermarket options

[@TheDirtyGoatee]

amd_64 those are stock ST3 lenses. They’re not cheap from Ford.

[@diljithayre9379]

Alright guys putting his big mouth thing in easy you just take the grill out take the Shroud off and everything can be put straight through the front it can be done in less than 35 minutes I know I've just done one the weekend do not take that bloody bumper off if you can get the grill out it's a simple matter take the Shroud out take the little bit of plastic out feed the big mouth through and then bolt it through the back sometimes the number plate will get in the way just detach it and then we stick it back on simple do not take that bloody bumper off

[@CrazyUnicorn48]

I don’t trust the plastic on the grille😂with my luck I’ll snap that hoe in half lmao

[@garyeales1116]

Totally agree, certainly not necessary to remove bumper

[@CrazyUnicorn48]

@@garyeales1116 Oh well🤷‍♂️taking the bumper off on these cars is super easy. Gave me tons of room plus i cleaned up my mishimoto intercooler while i was in there.

[@jeffreyhunter7451]

I've really wanted to get one of these but I'm worried about when it's raining. Is there a higher probability of water entering through it

[@stage3motorsports]

We don't get a lot of rain here in Phoenix so we don't have a ton of experience in the rain but we don't think you'll have any issue with water.

[@theoriginalcttheoriginalct6938]

I'm no automotive engineer, but it seems like poor man's water injection to have cool rain mist lowering boost temperatures, yes, no?

[@commenter1513]

Theoriginalct Theoriginalct water/methonal injection happens after the intercooler, getting water on the air filter will just make it harder to get air

[@TheDutchGuy110]

Water spray won't magically go up a 45⁰ slope it'll drip down instead. the air on the other hand will be forced up and into the airbox. In the next couple weeks i will install the COBB Redline scoop on my ST i have a little carbon theme going just some little bits and bobs spruced around the interior and a logo replacement on the back from carbonfiber since the stock logo's chrome is known to peel on the Focus Wagon variant of the ST.

[@tyranus1111]

No link to the part?

[@stage3motorsports]

Check out this part in the link! www.stage3motorsports.com/VT-BM-001-2013-2017-Focus-ST-Velossa-Tech-Ram-Air-Big-Mouth-W-Flare-Intake-Snorkel.html

[@diocristo34]

any problem with rain or strange objects?