2013-2018 BMW X5 Rear Suspension Conversion Tutorial

[@Mahcmahc20]

any video on how to install the module to get rid of the light????

[@colineggen3187]

Awesome video. well done. Wondering if anyone can help with air suspension issue I have. Vehicle was sagging so I replaced the air bags. This fixed the issue for about 5 days. Then sagged again, this time air compressor would run for 10--15 seconds then shut off and no air would go into air bags. I replaced the entire air compressor unit, so this rules out the compressor, the solenoid valve, decadent beads, etc. The new compressor runs for 1 second and shut offs, no air going into airbags. I checked air lines and they are all good. Wondering if the system needs to be re-calibrated with the ITSA software? Not sure what to do...

[@RODRIGUEZMAKAVELI]

I think switching from air to coil spring might be ur best option

[@colineggen3187]

@@RODRIGUEZMAKAVELI Brought it into euro mechanic. He just cleared the error code on the ECU and replaced the ai suspension fuse..even though the fuse tested fine, he replaced it anyway. This solved the problem. BMW would have charged me approx 3-4k for all of this work. I did the airbags and compressor myself for $450.. just had an extra week of frustation because I did not have the software to clear the error code myself. I think buying the ITSA software would be a good move for any future DIY.

[@tatiannaannunaki2027]

I replaced the airbags also. Lasted about a year. Going coils now.

[@mannyg4581]

@@tatiannaannunaki2027did you get error codes

[@mannyg4581]

Does the air compressor stay on?

[@danielandresmachucakl6528]

✍️👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼

[@marcolopes9426]

You don't need to turn off the compressor or took out the diffuser? Also can you do anything for the error message in the dash? I contacted a bmw coder and he told me that he would have to turn off EDC because of the adaptive suspension, and I also noticed you have the same.

[@giobonilla576]

I just ordered these for my 2013 x5 50i They sell these with the fault delete so that the leveling light doesnt go on. Pretty sure it shuts the compressor off. Or you can just pull the fuse from it (prior to starting the job) so it doesnt stay running while doing this. Tape off the old airbag lines incase you ever want to go BACK to air suspension.

[@marcolopes9426]

@@giobonilla576 how is the fault delete? Do you have EDC suspension?

[@giobonilla576]

@@marcolopes9426 i do. I just ordered my kit it should be here within a few days.

[@marcolopes9426]

@@giobonilla576 Awesome! if you could keep me updated after you're done with the whole process it would be very nice, because I still have the dashboard error message every time :D

[@giobonilla576]

@@marcolopes9426 they sell 2 versions on the site… one with the light delete, one without. Im guessing you bought the one without?