In this video I am showing how to fix a common issue with the 2013-2018 Avalon where the driver's side door grip has a tear or the fake leather is worn out. Link to the material I used: www.ebay.com/itm/224247649115
Пікірлер: 42
@NikGarage2 жыл бұрын
Guys, multiple folks asked me what I did with the tabs that were Drilled Out. I forgot to record how I filled the tabs with Hat glue using my wife's Hot Glue gun. It has been holding on perfectly fine, no issues. I am sorry about that.
@Reliable1102Intel7 ай бұрын
Getting ready to perform this process on our 2013. Replacing the chrome bezel on the switch assembly on the drivers side. Of course the switches must be removed from the original and installed on the replacement bezel. But your video provided good info. Will be using pan head screws instead of the hot glue, or might use 2 part epoxy.
@cheriangel491811 ай бұрын
I've never done anything like this before. I was able to do this exact thing by myself, a 50-year-old woman. Thank you so much! This was so helpful and I would not have been able to do this without you because it bothered me so much every single time I got in my car. And now I have the satisfaction of fixing it myself all because of you. Thank you
@NikGarage11 ай бұрын
You are so welcome!
@georgelongoria60414 ай бұрын
Not sure anyone commented on this or not. But you DO NOT need to drill out the two black plastic welds to remove the armrest. You only need to drill out the two WHITE welds. To reattach the welds, I used a plastic welder but have seen people use everything from hot glue to superglue to panel screws. I think the later is the way to go and don’t know why Toyota didn’t design it that way in the first place. Thanks for the video how-to. It definitely kept me from breaking plastic!
@Mike-zl5me Жыл бұрын
Great video. Direct. No extra blabbing about crap. I wish all how to videos were like this un
@joeslovo7384Ай бұрын
Great job in making the video. So helpful. Thanks!
@joegilmore41252 ай бұрын
Thanks for the video……..I used the same seller for the “leather” which was excellent quality and as you stated, definitely thicker than oem. Used 3m glue and 3/8” staples …….like you I felt “looks pretty good”. Removing the door panel was actually easy…….putting it back was another story. Still, after a large volume of profanity I finally got it reinstalled. Wouldn’t have tried this without the benefit of your “tutorial “!
@emiliosanchez56212 жыл бұрын
I have the same problem with my 2014 Avalon. My center console cover is also worn badly to where the vinyl is rubbed off. I, as you, was disappointed with the quality of the material used by Toyota. Thanks for sharing. Now I know I have my work cut out for me.
@BostonianAnas2 жыл бұрын
That was a smooth job 👌 thanks!
@doublebase6509Ай бұрын
Wow nice work!
@jasonzimmer7069Ай бұрын
You're good! Nice job!
@sparsrus2 жыл бұрын
thanks for the video.
@matthewbauchou4683 Жыл бұрын
Great job
@felixanderson83879 ай бұрын
Great presentation and easy to follow. Thanks 9:23
@NikGarage9 ай бұрын
Glad it was helpful!
@japnikki Жыл бұрын
Thank you!!
@NikGarage Жыл бұрын
You're welcome!
@ronarroyo14162 жыл бұрын
What company did you get the real leather covers, I have only been able to find synthetic
@MenInStone23 күн бұрын
But how did you attach the arm rest on after drilling out the plastic welds?
@TheIronman11202 жыл бұрын
Thanks so much for doing this video! I've been looking for this for over a year. Can I ask where you got the replacement armrest cover?
@NikGarage2 жыл бұрын
Got it on eBay
@robertcostello9989 Жыл бұрын
Same issue with my 2013 Avalon Hidden defect
@lerronlittle94792 жыл бұрын
Same Question as Matt Singa: what did you do about the plastic clips that you drilled out?
@NikGarage2 жыл бұрын
I Used Hot glue to fill them in and it has been holding on just fine. no issues so far.
@timphillips44742 жыл бұрын
I have the same problem on a 2013 model. I watched the video and it was quite helpful. However, the replacement cover shown on ebay when the link is accessed looks quite different from the one you used in the video. I ordered one from amazon that looks identical to the ebay link and it is considerably too short...it does not fit. Would you mind verifying that the ebay link is for the one you used in the video? Thanks.
@NikGarage2 жыл бұрын
Yes the link is the same exact one I used.
@Jaxmidway1 Жыл бұрын
Thank you for the video it was awesome can you tell me about how long it took you to do it is it a weekend project the one day or ?..I finally got the material for the armrest in I like to get working on it
@NikGarage Жыл бұрын
Took me about 3 hours with filming.
@Jaxmidway1 Жыл бұрын
Thanks again for the video!,... got it done, looks great
@nof8kn Жыл бұрын
Thanks for the video!!!! Were the Door lock cables easy to remove? Also, did you restaple?
@NikGarage Жыл бұрын
Yes, easy to remove, they pop out. No I did not staple, I used Hot glue.
@garthmcbridesr6440 Жыл бұрын
Yeah, I gotta replace mine. Wish me luck, I am not the handiest chap
@aprilleragsdale43432 жыл бұрын
I have the exact problem in my 2018 Avalon where did you get the replacement material
@NikGarage2 жыл бұрын
eBay
@mattsaniga14562 жыл бұрын
what did you do about the plastic clips that you drilled out?
@NikGarage2 жыл бұрын
I used hot glue gun and filled the hole with hot glue. Not the perfect way to fix it but it works.
@juanitasmith76002 жыл бұрын
Can you buy more clips...is that why you didn't show that part 😆
@davidcohran78552 жыл бұрын
Where did you purchase the cover ?
@NikGarage2 жыл бұрын
eBay, check the description of the video, link should be there.
@juanitasmith76002 жыл бұрын
You didn't show how to put the armrest bk in place...you went straight to putting the door panel bk on 🤔🤔🤔
@NikGarage2 жыл бұрын
I know, unfortunately that footage was messed up and I couldn’t use it. I only found out while editing, so sorry.