2013-2018 Toyota RAV4 Wireless Apple CarPlay Radio Installation Guide

[@wavvy6654]

one of my tabs on the right air vent is melted down. what do i do to unclip it?

[@johnmathewson985]

it has been a few months, are you still happy with your unit?

[@wavvy6654]

do you still need the 10mm bolts when you put everything back in place or is it held in by the vents?

[@AnthonyFerriera-p8k]

I put the same unit in my moms rav 4.while running Sirius radio through aux input the music stays on when making a phone call.Any ideas on how to get unit to mute when phone call is active?

[@orgiluuntv]

how to connect my Steering wheel cable ? becuse it is not working? do yu have any Photos ?

[@viabecsexpert5681]

Step 1: Please unplug and plug the canbus box and 8PIN canbus plug. Sometimes the canbus wiring is not connected tightly. Please check whether the SWC PIN is bent. Note: Please turn off the car before unplugging and plugging the canbus box. otherwise, the canbus box may burn out. Step 2: please rechoose the canbus option. S1: connect the head unit with your Phone hotspot first. Click Settings APP -- Factory -- password is 123456 -- Select Models. S3: Canbus option: 03：Simple Soft --30：Toyota-- Models: 14：All New Highlander -- Config: Public Finally, press ok to save the settings. Then the head unit will update it automatically. Video: Set up the canbus option. kzbin.info/www/bejne/pYPGc6FpeJuopNU photo: How to wire KEY1 and KEY2 lines. photos.google.com/u/1/search/_tra_/photo/AF1QipOS8ueCjBQgLgnCyCEefNWl0R_WU8IdLwRq0Zc8 photos.google.com/u/1/search/_tra_/photo/AF1QipMyObiZik4GKqIGXqIT2J0HMAB-GOjCwumTDim-

[@jjsoto9506]

Does your steering wheel controls still work?

[@viabecsexpert5681]

yes

[@aviateur1618]

My unit won’t turn off with the key. Turns on with key when pull the plug and plug back in, but won’t turn off

[@BacHo6969]

I have a hissing noise after installing a radio. It goes away temporarily when I pause the music, but comes back when i play. What could be the issue?

[@viabecsexpert5681]

This may be current interference noise. 1. You can wire a GND line to a metal part of the vehicle's chassis. It can improve the stability of sound. Note: 1) In addition, the ground wire should be as short as possible. Long ground wires can pick up noise that can be heard in the audio system. If you have extended the ground wire, make sure the splice is firmly connected and you may need to use a larger gauge (thicker) ground wire. 2) Scrape off the rust on the joints 2. Or you can connect the GND to the AUX line. and then fix it with tape.