2013-2022 Ram 1500 Mopar Front Tow Hooks Install

[@Delmiester]

Love it when I search for something, watch the first video in the results, and have no need to watch anymore. AND there is a parts list in the description, could not ask for more, top-notch work.

[@alejolar90]

Great video. Not currently doing this to my truck but it helped to see what's behind the bumper... Thanks

[@TheWiscoGuyz]

Thanks for watching!

[@forthefunofit5487]

Glad I found this! Great video and I thank you.

[@TheWiscoGuyz]

Thanks for watching!

[@sherireed7545]

Shouldn’t the opening on tow hooks go towards the outside?

[@TheWiscoGuyz]

yes i messed up lol

[@luisaguiarsr.4266]

Great video thanks you just helped me out. Thanks again

[@TheRealSweny]

I just got a steal of a deal 75$ for an oem set on eBay. Great Vid.

[@TheWiscoGuyz]

Nice!

[@jebx99]

Just adding, looked up torque on alldata: Front Tow Hook BOLT 85NM 63ft/lb Front bumper support nuts - 1500 Light Duty 95NM 70ft/lb

[@grb6326]

What size are the bottom bolts that thread directly into the frame? The big bolts.

[@abdullahal-shimri3091]

Looking good! If seen some red ones on eBay.

[@polarisxc5549]

Great video, very clear - thanks!

[@TheWiscoGuyz]

Thanks for watching

[@jelendrez3729]

good video. what is the bolt size that goes to the frame.

[@BilliamNye1]

Didn’t add the parts list. If you could please. Thanks!

[@TheWiscoGuyz]

In the description

[@grb6326]

Do you have PN for the upper brackets?

[@RogerMiles-o9m]

Need the tork lbs

[@jeffdavis9738]

Wouldn’t you want the open end of the hooks to the outside of the truck?!!

[@TheWiscoGuyz]

Possibly 😂

[@TheProblemAtHand]

@@TheWiscoGuyz The factory installed ones have the open end towards the sides of the truck

[@gregdeguerre8804]

If you have to pull on that much of an angle that you are worried about a strap slipping off use the hook on the other side then. No big deal.

[@jeffdavis9738]

@@gregdeguerre8804 I’m not worried at all, they open to the outside because you should actually yoke them to pull using both hooks, which is what I usually do

[@rchokelal]

Great Video. My 2022 SLT is the same.

[@TheWiscoGuyz]

Thanks for watching

[@daviddenman7479]

I’m looking for the parts list! I just bought a 21 1500 classic and I need to do this. I’m from Wisconsin also. SE corner. I subscribed

[@TheWiscoGuyz]

In the description

[@cliosp]

Can this be installed on a ram sport 2016? Modifing the black plastic stuff in the bumper?

[@TheWiscoGuyz]

Yeah it will work. You just need to cut the plastic piece to get it to work.

[@forthefunofit5487]

quick question....I just did the install as per your video. Now..........all said and done except one hook sits lower that the other. The right one just sits lower. I dunno how that could happen. Any Ideas on some adjustment I could do or maybe something I did to cause it????

[@TheWiscoGuyz]

Maybe your frame is twisted???

[@MikeMaldonado]

Thanks for the vid.

[@TheWiscoGuyz]

Thanks for watching!

[@willpenner6235]

will the part numbers listed work on a 2018 Ram 1500 ?

[@TheWiscoGuyz]

Yes it should

[@brintos9141]

Awesome! How about the parts list?

[@TheWiscoGuyz]

In the description

[@michaelharris9675]

Thanks for the information

[@maxmedhurst9371]

Buddie you said in the video you'd put the torque specs in the description and in the description it says it's in the video the torque specs is all I need what gives

[@TheWiscoGuyz]

90ft lbs for the big ones to the frame

[@sandhu1922]

I have 2023 1500 classic express crew cab it will work?

[@TheWiscoGuyz]

Do you have a the plastic bumper or steel?

[@yorkrojas1452]

Great Job!!

[@TheWiscoGuyz]

Thanks for watching!

[@z32plus2]

What are torque spec for those 18mm bolt?

[@TheWiscoGuyz]

63 FT LBS

[@thunderheads4103]

Are there rear yow hooks too?

[@TheWiscoGuyz]

There may be, but I never looked into it

[@dbriggs1689]

Great video thanks for making it. Were those genuine mopar parts or ebay? I recently purchased the ebay specials and thought the bezel looked kinda plain compared to the factory take outs. I thought I caught a glimpse of a mopar box you had but my bezel looks just like yours.

[@TheWiscoGuyz]

Yeah everything was genuine Mopar. I work for a Chrysler dealership.

[@eddiekross2130]

great video, but man.... maybe jack stands when you use those ramps. I wouldn't trust my life to a coupla plastic pieces.

[@gregdeguerre8804]

Looks pretty easy. I bought a ‘21 warlock that doesn’t have hooks (quick order package). Trying to decide on the actual warlock closed loop hooks or just some Amazon chineseium open hook ones for a 1/3 the price. I only need them for the odd time you have to park somewhere “stuckish” when we go ice fishing to get moving.

[@TheWiscoGuyz]

Chineseium would be ok for that I'm sure. Thanks for watching

[@raymondremillard7627]

The price for the tow hook are outrageous 250 each hear in Canada Ontario

[@TheWiscoGuyz]

Yes, very high priced. Mopar did sell them as a kit for way less money but as since been discontinued

[@jamessackett7431]

Tell me to get the parts twice. Definitely tell me to get the parts twice