**2013 Prius C** DIY: Crux OEM backup camera add on to Factory Screen

[@philippepoulin]

Thanks a lot for the video! Just finished the instalation on my car and it went great!!👌👌👌

[@FlipSideGarage]

Great to hear. Good job!

[@pinthepu]

This is excellent video. I thought installing to my car Prius C 2013, as I am not a mechanic, could you please let me know, the connections to the radio where the crux wires go? That will help me to install myself.

[@FlipSideGarage]

Radio will have a label reverse trigger on the wire needed theb plug the yellow rca

[@kougen1454]

Hi man, at 03:00 where the water proof connect to the trunk, once you take it oit how can you put it back? the seal is very hard to get back

[@FlipSideGarage]

I used a small flathead screwdriver to work it in.

[@soultosqueeze7]

Awesome video! Im hoping i can find a crux for my 2016 prius C. Do you know if factory stereo for 2016 prius c would work with any crux backup camera like this one? Everything is stock, and im not sure if the touch stereo supports video or not. Thanks!

[@eliz3206]

Just spray with WD40

[@papafern]

How does it know you are in reverse? Did I miss something?

[@FlipSideGarage]

Reverse trigger wire. Yes missed it.

[@davitkhakhiauri2315]

Hey could you tell me how do i plug yellow one to the gps (multimedia) ? In your video you have another yellow plug ready but mine doest have any

[@FlipSideGarage]

Must have it.

[@davitkhakhiauri2315]

It is 2012 prius c

[@keyminlee5573]

that's awesome. I already ordered for my 2012 le camry and found your video. exactly the one I ordered. Crux. anyway. so the harness it self give a power to the camera right? I do not need to connect the wire to rear light wire or so?

[@FlipSideGarage]

Yup u can manually power it so you dont have to have it in reverse.

[@keyminlee5573]

@@FlipSideGarage Thanks!

[@chrisrgutierrez]

How did you feed the cable from the outside to the inside?

[@FlipSideGarage]

6:30 mark

[@halseytech]

do you need to solder the camera power to the reverse light or do you need to solder it on the radio?

[@FlipSideGarage]

Reverse light

[@FlipSideGarage]

Can be done either or. As long as its a reverse signal

[@cristianmendoza617]

Hello, greetings, do you have the Amazon link to purchase this camera?

[@FlipSideGarage]

Sadly i do not. I do have the model numbers in the video as well. Hope that helps.

[@cristianmendoza617]

I have a 2012 Toyota prius c if this camera reference helps me

[@FlipSideGarage]

@@cristianmendoza617 shpuld be if its all the same

[@AndrewDasilvaPLT]

Did this attach to your reverse lights at all?

[@FlipSideGarage]

I mean it gets a reverse signal yes

[@rithyseang7308]

Can Pruis-C 2012 install this backup camera?

[@FlipSideGarage]

I dont see why bot,but if it has the same plugs as the 2013 then yes it will work. I cant say for sure,without checking.