2013 VW JETTA NEC CLUSTER ON BENCH KEY ADD (ALL KEYS LOST)

2013 VW JETTA NEC CLUSTER ON BENCH KEY ADD (ALL KEYS LOST)

[@petecassidy4181]

Hi Richard, nice video appreciate your time and efforts. Thanks again for some great content🙏👍😀

[@trtl2311]

Fantastic step by step instructions!!

[@jaroslavbrodskij499]

Thank you for the video! Very useful!

[@kostelectronics]

Hi Richard, I have trouble to read a 2013 Dash with NEC+24C64 (colour TFT Display). I have a working key, the instrument goes black and hangs there for hours. I need to make a power cycle and the instrument comes back. I use VVDI2 with the latest SW Version. Autel IM508 fails too on this instrument. Any idea? BR Matthias

[@MrHodaddy]

Thanks for sharing! Have you tried pogo pin with keytool plus?

[@WonderheidVieira]

GOODNIGHT I SEE THAT YOU ARE IN THE USA, I'M IN EUROPE, HERE I AM A FOLLOWER AND I ADMIRED YOUR WORK, YOU HAVE ALREADY DONE SOME VW TRANSPORTER AE, 2014...

[@adolfpipetkin]

If I understand correctly, when you have car, you can on service mode by obd, you only need to read 24c64 from cluster

[@davidcespedes2871]

Does the same process work for Micronas cluster? Great video , thank you so much

[@yiannakosautomotivekeys2380]

*Thumps Up Richard. I like your Cluster connector. Any link to that would be much appreciated as your video. Thanks for sharing.*

[@carloscamargo9679]

Awesome video. 👍👍

[@jackgates6949]

It would be interesting to see if he could do this all on bench with prox instead of a keyed ignition? I use the same tools but must learn the prox type via OBD in car. Also I use the "make key with immo data" instead of "make dealer key"...not sure the difference?

[@AutoLockSector]

@jackgates6949 Unfortunately for prox systems, the key needs to be learned through the OBD because the kessy needs to see the new key To program the keyless go access.

[@AutoLockSector]

@@jackgates6949 kzbin.info/www/bejne/l4icgourhqmboMUsi=-mm9cLqPiXhk_THj

[@jonyovanno4145]

How much do you get for a job like this versus what a dealer gets for a key???

[@stevematzke1428]

Excellent video. Question, is it possible to delete keys or re-write to a used slot if all are used? I realize all available keys need to be reintroduced when adding so can the truly lost/stolen key slot be reused?

[@AutoLockSector]

@@stevematzke1428 a used position cannot be used again unless all keys are deleted and re-introduced

[@stevematzke1428]

@@AutoLockSector where is the delete key button? VVDI2 and Abrites NEC cable.

[@AutoLockSector]

@@stevematzke1428 You have to learn the keys, the traditional way with pin code login and introducing each key individually on the coil. not by VVDI2 Direct method

[@stevematzke1428]

@@AutoLockSector customer has 2011 Jetta AKL, 7 slots used. Wants 2 new. Make last remaining slot directly and use CS and PIN through OBD to delete all and re-introduce this new and one add? Not Kessy.

[@stevematzke1428]

@@AutoLockSector with vvdi2, on bench, was able to create dealer key with super chip (in this case for testing) and when adding chose option 3 and program with saved immo file. All keys deleted (all FFFFFFFF) but the one I introduced. Used Abrites NEC coil and switch. Thank you for the video. But yes, you can delete all and program new directly.

[@AutoMasterKey]

Has anyone gotten this boot mode method to work with the key tool+? Once the cluster is in boot mode, reading EEPROM or immobilizer data won’t work. The service mode method works on the key tool, but it’s extremely annoying.

[@israelkamangira1675]

Hie sir thank u for this video I have a question how do I identify the pin for reboot that pin to press for 10 seconds

[@jesusblanco7514]

I need help how can we get in contact . I went to do add key 2012 vw jetta tds proximity but vvdi2 will not automatically recognize the cluster and the ignition is on ask me to try to manually select one try all off them but nothing any tips

[@mrgringo6859]

Richard can you perform the same process with the keytool +

[@mrgringo6859]

Great video, where did you get the cable with the pogo pin

[@OvidiuMarin]

What happens if you overwrite or lose the original eeprom dump ?

[@jonyovanno4145]

I’m trying this and it tells me that it’s not connected to vehicle??? It won’t backup abs either???

[@DFWAuto_Hack]

You must backup abs by obd

[@a1keysolutions155]

May I ask why my vvdi2 has different screen ?

[@eddiemiekop4006]

Hey Richard which software are using there?

[@LooNeYMaiN]

What adapters are you using to connect to the cluster?

[@Dike2011]

Arrites Nec cluster set

[@maumak3498]

ABRITES AVDI VW NEC Cluster Set

[@najemm19]

Hi my friend where can I have this tool you use with vvdi2 please and name?

[@razdahan2390]

Can you do Q3 2016 The same?

[@nightcoreeg5669]

where can i get the port it dose not come with the cable

[@seh97]

What power supply do I need?

[@julioalay7004]

I tried same procedure with key tool plus and guess what! KTP could read immo data

[@tjrufu01]

Hi which cluster cable did you use

[@julioalay7004]

@@tjrufu01 arbitres cable

[@tjrufu01]

Ok thanks

[@КлючаНет]

На массу через резистор или без?

[@jimrokfish]

Which adapter are you using? I want one....

[@SweatyMan80085]

Yes! Inquiring minds want to know. I've been searching the web and I'm not finding anything.

[@jimrokfish]

@@SweatyMan80085 Abrites has this cable…took me a little bit to find it…with the Nec connector

[@SweatyMan80085]

@@jimrokfish Thank you! I just got a cluster from the salvage yard to learn on. I can't be relying on servers and online calculations.

[@rick.galvez.youtube]

@@jimrokfishhi there can you provide number #s of Abrites cables and NEC Connectors. Pls and thx

[@jimrokfish]

@@rick.galvez.youtube VW NEC Cluster Set (Abrites) This is the cable your looking for….not sure which suppliers have it at the moment….most will drop ship…

[@МаксимСоловьев-ш3ю]

Hello, does the needle close the boot pin to the ground or + ? what is the nominal value of the resistor used ?

[@lsimson]

does this require any vag old helper? or can be done without all that? just not sure on that due to the server shut down etc. i have vvdi2 and autel. i dont want to go OEM dealer key and ODIS as the customer is far out etc. thanks

[@julioalay7004]

Tried to do same procedure with key tool plus, and yes I do have adapter and pogo pin but guess what Key tool plus fail to get immo data Key tool plus piece of sht

[@nightcoreeg5669]

it works for me

[@diasuyouri8695]

keep up the energy in a year or so you will be doing these jobs for peanuts because you and a few others decide to teach everyone how to do it for likes, comments and subscribe

[@Dike2011]

Knowledge is becoming almost free & more free. That's the reality. That is the world we live in. You can keep hiding yours.

[@premierlocksmith4716]

Good point brother. But nothing we can do about it. If not him some other person going to upload video. If not this other person, then another person going to do it just to get those views.

[@natalierforever]

@@Dike2011there’s are many ppl who can’t do this even watching like me I wouldn’t dare do any of it myself .

[@carfashion2]

why is your miles flashing chief ? were you able to back ?

[@AutoLockSector]

It's an ebay cluster for demonstration only. It came that way. All I showed were the steps on how to program the key.

[@carfashion2]

@@AutoLockSector ok

[@evcoolgene]

I just tried this procedure, Im using the exact same software and hardware as you were here. The issue Im having is the option to ‘read eeprom/flash’ on VVDI 2 is grayed out, no option to click it. In working on a 2012 Jetta cluster. Maybe I have to manually select the instrument type first… but I have tried several of them and none are connecting and reading the immo. Please help

[@AutoLockSector]

Pre select the Instrument Cluster, Put Cluster into service mode by holding the point for 10 secs than release, than click read eeprom and wait (be patient)

[@evcoolgene]

@@AutoLockSector how do I pre-select the instrument cluster? There are a lot of options under ‘4th Immo system’… do i just try each one until it connects?

[@locksmithcharlie]

@@AutoLockSector what power supply adapter is that?

[@AutoLockSector]

@@locksmithcharlie GME36A-120300FDS 12V 3A

[@locksmithcharlie]

@@AutoLockSector awesome thanks, I do about 10 VWs a month and this will be a game changer for sure,would have a link this?