2014 can am commander will not start. #2

[@Rokonroller]

Always remember thT 95% of all electronic issues are due to poor ground. Remove & clean battery cables & posts. #1 source of problems

[@NVGUY4732]

My 2015 Can am Commander 1000XT would start and then go into "Limp Mode" or die. It turned out to be a loose ground. Jump underneath and make sure your battery post and ground are tight. Mine rattled loose over time.

[@MrLuna-vr7yk]

I bought a 2022 commander having issue had battery checked battery fine going to see and do a few of the comments hopefully it works

[@stacyreid5077]

I had that exact same problem on my 2012 Commander and mine was due to a bad battery

[@brockhall4436]

Ended up taking The battery in to get tested. It tested out to be fine. Then I put it back in there and never had a problem again. Strange.

[@staceyhampton1595]

Something happen to my dad's can-am commander side by side today it happen when riding like some one unplug the battery when riding everything whent dead so i check all the fuse and relays then I took the main relay out and change it with the light relay then everything came on so I think it might be a bad relay so far it never happened after

[@monkeybear6201]

hey man you ever figure it out i have a can am maverick with the same issues..

[@we306]

I'm having the cam problem

[@kenziemurdock3539]

Try battery or fuse