2014 Fusion No Start - Bad PCM ?!? -- FIXED--

Рет қаралды 13,035

Stewart Motoring

Жыл бұрын

Troubleshooting and fixing a not starting 2014 Fusion 2.0 Titanium.

Пікірлер: 40

@cortez_was_not_here5675 2 ай бұрын

Bro this video was amazing this is literally the issues and what I was thinking of doing

@garybennett2240 4 ай бұрын

I am having the same problems with a 2013 ford escape. Thanks for the video!

@kemar_f2410 Ай бұрын

thank you man ive been trying to find this for a while now

@ronaldbowles5947 5 ай бұрын

Great video I’m glad you was able to inform us I’m having the same problem.

@StewartMotoring 2 ай бұрын

Did it work?

@sharinmythoughts2510 8 ай бұрын

Thank you so much for this video ❤❤🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸

@jesusbecerra789 11 ай бұрын

Did you also have a battery light on including the other lights as well im having the same problem.

@pandaboy240 9 ай бұрын

How do check for spark on a 2014 ford fusion ecobost

@frankmontez6853 Жыл бұрын

2015 SE and it’s not ( sometimes doesn’t) cranking got give it many tries to start. Auto Zone can scan it but not ORellys and sometimes dies when I do start it

@eanras16 Жыл бұрын

I have a similar problem mines do start but codes coming up change parts n nothing besides keyfob is not opening the car. I have to do it manually. I think I'm going 2 buy the pcm and take it to ford so they install it and avoid the extra problem. Also it saying mine park assistant needs checked ✔️. I changed the sensors and no change

@douglasgallagher5707 Жыл бұрын

2015 fusion 2.0 doing the exact same thing but intermittently. When it mirrors your symptoms perfectly I can unhook the battery for 5 minutes and it will regain communication. I'm assuming it is a heat related connection issue that temporarily corrects itself after a cool down. Bad solder joint on board is my assumption. Point being its not a one off issue and thank-you for the video to confirm my suspicions about the pcm

@StewartMotoring Жыл бұрын

Good luck, hope it fixes your issue

@filipemendon 11 ай бұрын

Did you changed the pcm and did a parameter reset? Just got a ford fusion 2013 and I'm able to start and drive but after some time the car just goes to limp, brakes gets stiff as fuck, steering wheel and shuts down. I almost shat my pants on first time that happened in the middle of the day in an avenue. I believe the car overheats and I'm able to make it run after cool down.

@StewartMotoring 11 ай бұрын

@filipemendon you need to scan the car for check engine light codes. My car wouldn’t scan to tell me the codes, further telling me the pcm was bad.

@filipemendon 11 ай бұрын

That's the thing. My car starts but all those symptoms appears after sometime, looks like something is overheating and throwing a limp mode

@StewartMotoring 11 ай бұрын

And you don’t have a check engine light? Even if you don’t though, you’ll have stored CEL codes you should scan to get an idea what’s going wrong.

@timnowlin1 Жыл бұрын

Have 2014 doing the same bad throttle body bad everything poping up turn the key on and off couple time its goes off its getting wroser tho

@cortez_was_not_here5675 2 ай бұрын

With the ecu being from flagship 1 did you have any problems so far?

@StewartMotoring 2 ай бұрын

Nope no problems. Drive the car all the time just like I was before this issue.

@nancydees6720 8 ай бұрын

i’m having a similar issue with an 07 ford fusion. dead battery and no start every so often. Replaced my starter and battery, worked fine for a week or two. not the battery has been dying every couple of nights. The battery light came in while sitting in park or if i idle too long, Alternator is good, our next step was going to be looking at the pcm or bcm? What do you think?

@joeandgod1 6 ай бұрын

Still having the same problem?

@AJsFFS 10 ай бұрын

Tried to flash back to stock tune and now my 2017 Fusion is acting like this… after the reset from ford were you able to flash tune it again?????

@StewartMotoring 2 ай бұрын

I have never tuned the car

@ericflowers2146 Жыл бұрын

Had the same happened on a lady's car I know. Wouldn't start at all. Disconnected the battery for 5 minutes then it works for now.

@hugogonzalez4730 Жыл бұрын

Where did you get the pcm from? And how much did it cost you? I am having the same problem 😔😔 I replaced all the relays and fuses but it’s giving me the same errors.

@StewartMotoring Жыл бұрын

www.fs1inc.com I am not affiliated with this company at all. They just had what I needed for a good price. Worked out good. Customer service pretty good too.