2015-2023 Mustang Wheel Spacer Hub Centric 25mm Billet Aluminum Pair Installation

Bill shows you how to install a Pair of Silver Billet Aluminum 25mm Hub Centric Wheel Spacers on your 2015-2023 V6, EcoBoost or GT Mustang.
Give your 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, or 2023 V6, EcoBoost, or GT Mustang that killer stance with these wheel spacers from CJ's!
These wheel spacers are specifically designed to give your newly acquired Mustang a much wider and more stable stance that will push your factory wheels and tires out to sit perfectly flush with the fenders.
Check out our step-by-step guide here:
www.cjponypart...
Check out more Mustang Wheel Spacers from CJ's here:
www.cjponyparts...
Subscribe to CJ Pony Parts on KZbin here:
www.youtube.com...

[@quantomic1106]

I had some wheel spacers laying around. So I bought a mustang to install on them.

[@s550danny]

quantomic1106 😂😂😂

[@Choc1222]

haahhaa

[@alexjimenez9485]

Hahahaha💀

[@KrishTheBot]

😂😂

[@elguanatos13]

😂😂

[@mikec9636]

I purchased these and it gives the car a very aggressive stance. It rides great and handles amazing. Thanks CJ Pony Parts for a great product!! It took 14 minutes to install.

[@sbiegs3885]

Your channel could not be any clearer! You talk to us like humans and explain everything very well. KEEP IT UP!!! SUBBED!

[@cjponyparts]

Thank you very much!

[@MegaDP24]

Installed mine yesterday and they fit and look great. Made it a little easier on myself and just had my wife hold the brakes while I tightened up the front ones tho.

[@franchisefred4066]

Nice. Now you’re the king on the road

[@whpony96]

One thing you want to keep in mind. If you decide to add these you better add paint protection on the sides or add mudflaps. Stone damage to your paint WILL happen.

[@angelestapuro4547]

Good point, didn’t think about that too much

[@ChuckTay23]

I don’t understand could you explain please?

[@seth8881]

@@ChuckTay23 the tires will be partially pushed out past the wheel wells causing objects thrown up by the tires to scratch the paint

[@johnwick-ps5xk]

Cap

[@HPX584]

they dont stick out past the fender. Its just shy from being flush

[@ohiodronephotography3222]

Be back on the road in no time! Bill's videos are the best!

[@curlyhoward8917]

Installed in 45 mins flat and that's because my floor jack sucks, great video

[@mikeb6902]

if I ever have trouble with not being able to break loose the lug nuts, I have an appropriately sized metal pipe to slip over the ratchet, gives me better leverage to remove stuck fasteners.

[@dayinthelife2136]

To the point and complete!

[@johnnyducosrodriguez7855]

Thank you for the video it was very helpful .do I get all four spacers the same size

[@george4u1960]

Today I just had these install on my 2019 mustang GT performance package one. I love these spacers make sure you get them from CJ pony. They fit good and I don't have any vibration at all and guess what. They only charged me $35 to put them on you see I'm in Dallas Texas. And I'll go to the Mexican service people and they are so nice. I even tip the guy $20 and he was surprised I did. Now I can go back to a place check on the torque of them.

[@budchewning4790]

CC gonna be golphin with steph

[@johnnyducosrodriguez7855]

thank you for your video it was very helpful . my question is do I get the same size spacers on all 4 wheels

[@ajah3247]

Is it safe to drive on track with that ??? And how fast can I drive it ?? Spacers on ! Is it fit on the dampers suspension

[@MustangsofMichigan]

Just ordered me a set of these from your black Friday early bird sale. Can’t wait to get them love the videos!

[@5FaLlEn5]

Thanks for the great video I finally get to see what it looks like with spacers and I Like it.

[@charleynop1214]

Cant you just use treadlock on the spacers so you dont have to retorque?

[@hectorjunior9374]

If I have 2015 year wheel spacer for a mustang will they fit my s197 I tried installing them and the wheel spacer lug nut wasn’t able to tighten up all the way I’m thinking there only for a 2015 gt500 model not a 2014 s197

[@stangtonio5.081]

Mine were extremely tight on the hub, the only way to get them to sit flush with the hub was to use an impact. Will I damage the hubs with them being super tight ?

[@cjponyparts]

As long as they went on straight you should be fine.

[@mr.selfdestruct1677]

Just got wheels spacers from you guys, for my 95 cobra, the instructions say to torque the wheel spacer to only 30lb ft of torque, that seems little low. Doesn't it?

[@stevecranmer2845]

Looks really good I have the exact car just wondering if that one is lowered at all

[@Zerogivengarage]

+Steve Cranmer Yes 1.3 inches on coil overs

[@zach_waltonn]

If your torque the little lugs to 125 the term only as strong as your weakest link is in place if those lugs come loose your tire can still fall off I worked at discount tire a while back those little lugs are stronger than you'd think go 150 no a dime more I presume 150 is the torque spec from what I remember but you should always torque em good just leave em on unless you have to take the rotor off and ALWAYS check torque when the wheels are removed

[@johngarcia2900]

Does this work on ecoboost 2018 with out magneride

[@kingsmen4728]

Can you still reach proper torque specs with an extension on the torque wrench or is it more accurate with just the socket on the torque wrench

[@Knards]

Can you just do the rear wheels and not the front as well? Will that change alignment or anything?

[@Zerogivengarage]

+MrMrwilson11 Yes you can and no it will not

[@Knards]

Bill Tumas Thanks Bill

[@TheChiefJudgeDredd]

Yeah, you're good

[@curlyhoward8917]

Bill, always a fan of your videos. You said to torque the spacers to 120-125. What should I torque the wheels at? I have the same wheel package as shown on the video. Thanks!

[@speaker816ify]

Stang S550 read your manual. mine said 150

[@coryselby7014]

Paul Speaker, your "manual" does not have hub centric wheel spacer torque specs. Look at the instructions that came with your spacers. Odds are your spacers are aluminium and if you over torque you could strip the stud in the wheel spacer.

[@xGR1MxREAPERx]

@@coryselby7014 read the comment moron. The guy said how much do I torque the wheels.. Not the spacers. He states the soacers are 120-125 and asks about the wheel. That is in the manual as stated above.. READ!

[@Starhopper6]

Does anyone have any spacer recommendations for after market wheels?

[@alaahindi5553]

Mr. Bill, Is there any issue with front ones while turning?! And to be honest, in the future I'm planing to install Aitlift. Do you think I'm gonna be able to lower the car all the way down safely with them installed?!

[@wickedcut]

I would of had someone mash on the brakes. Instead of torquing with a pry bar on the studs. Possible to mess up the threads?

[@kerrylogan2978]

Would it not be easier to have someone seated inside the car and holding down the brake pedal while you tighten the spacer's nuts; as opposed to using a pry bar?

[@cjponyparts]

If you have someone to help you then yes that is a good way to do it.

[@Firesource51]

I'm not personally a fan of putting someone into the vehicle once it is up on a floor jack.

[@xodominator]

Are there considerations for the use of spacers with magneride? I ordered a 2022 GT and it will have perf pack with magneride. I like the black rims, but they will be too tucked in for my liking.

[@anthonysoria9127]

did you ever get an answer?

[@xodominator]

@@anthonysoria9127 no

[@samuraistang739]

Is it me or does the rear have a bit of slight negative camber? Only noticed after I installed the spacers on the rear so wondering if this may be an issue? I have stock suspension btw and was just wondering if the rear has negative camber from the factory on the 15-17 GTs? Thx

[@jaydentroy24]

Samurai Stang mine camber the same way but car runs fine. Shouldn’t be a problem unless it’s excessive. I would just watch for tire wear.

[@Spurrr]

Im gonna assume these match the stock hub bore, 70.5. If my aftermarket wheels are 73.1, can I run hubcentric rings on the spacers?

[@cjponyparts]

If needed for your wheels yes you can.

[@Blueesteel_]

only issue with that is now the car will be much more prone to getting paint chips from the tires kicking up road debris.

[@sergeysmelnik]

+Frankie Boots You have to get splash guards.

[@josephr.8622]

Why would these be for only 2015+ & up mustangs? Aren't all gen mustangs the same 5x114.3 lug pattern, i have a s197 running pp1 wheels wonder if they will fit for reinsurance

[@liquidsmokemustang1537]

S197’s do have 5x114.3mm pattern but, have 1/2x20 lug/threads. S550’s have same pattern but, M14x1.5 lugs so, you would need spacers specific for s197. Both have the same 70.5mm hub diameter.

[@hectorjunior9374]

I bought spacers that came off a 2015 mustang and they don’t fit my 2014 s197 sucks tbh i need to kno if they will fit with different lugs or do I need new spacers specifically for an s197 model 2014

[@TheTrailblazer1974]

Do these hurt performance of car? Cause any issues

[@LuisSanchez-vu6uv]

What was the torque spec of the wheel lug nuts??? Is it 150lb/ft?????? Just making sure because it seems too high

[@cjponyparts]

That is the factory spec. To be honest I usually torque my wheels to around 120.

[@jt.124]

did anyone else cringe when he shoved the pry bar on the threads like that lol

[@a.wheeler7731]

Better way is to have someone hold the brake while in the car, requires 2 ppl though. Thats what I did and it worked fine.

[@SlangJeezy]

Maybe a piece of wood would (English is so bizarre, I love it) be better.

[@jeffstampher7184]

@@Hanibul_Lecktor I was thinking the same thing about the rust, when I install these should I sand the hubs first? Or maybe steel wool?

[@EM_AI_Technology]

Hello. is the same size for 2019 mustang??

[@ULIEINTOME]

They are for 15-24

[@h.s1987_]

I need advice For Spacers , i have 1967 mustang , Front-wheel drive is 18 inch And very naer to the ball joint .what are you think about it Thanks

[@chevyhs]

How are is that mustang lowered?

[@manuelrexlat2685]

i just bought this from cj and would i require camber adjustment or alignment?

[@Zerogivengarage]

+Manuel Rex Lat no

[@CharmCityWRX]

Will these work on a 2020 Mustang GT Premium NON PP with the Black Accent Package Wheels?

[@cjponyparts]

Yes they will.

[@that1DUDE620]

I have the rtr lowering springs on my mustang. Any fitment issues with these spacers and a lowered car? Thanks

[@peytonnowak9002]

Hey Bill my 15 gt with the performance pack is lowered on the CJ lowering springs and want to get these spacers for my car. Was just curious if I would encounter any rubbing or any issues at all at that matter with both of them installed. Thanks

[@renster143]

Murdered Stang me as well, I'm about to install them now, I'll let you know what happens , I have eibach lowering springs with koni Yello shocks and struts, my car is quite low now, floor jack won't even fit under it any more, hopefully I don't rub

[@mr_atc6205]

These look like a great upgrade for me, I have the OEM upgraded 20 inch wheels I'm assuming they fit ALL OEM wheels? And When you say safe for street use that's including aggressive accelerating and spirited driving I'm assuming? Just a concern for people that take it to an actual track? Thanks!

[@Zerogivengarage]

+Mr_ATC Yes we test fit with all the OEM wheels we had and they worked. If they are tightened down properly they will be perfectly safe.

[@douglasbaker5949]

So re-torque after 100 miles or so?

[@dylancallahan3404]

Can you run the oem lugs?

[@ReassuringSmile]

How often do you have to get the spacers retorqued?

[@elvishernandez2734]

My boss says 150 tourque is to much.. we usually torque cars at 100 and dually trucks we torque 130 is the lug is a 13/16 and if its a 7/8 we go 140 pounds .. never had any problems but dam 150 seems high for me

[@cjponyparts]

That is Ford's spec straight from the manual.

[@stevecranmer2845]

In your opinion what would have the biggest impact visually the spacers or lowering springs, I want to do one or the other soon. I work in a shop so installing springs is no problem it would great to get your opinion on this Bill

[@Zerogivengarage]

+Steve Cranmer I would lower it first

[@VesselFitterguy]

I'M ASKING FOR BASICALLY EVERYBODY WITH A 2018 AND UP. WILL SPACERS VOID THE WARRANTY?

[@Kyle-he8en]

No, unless an issue within the car occurs that the dealership can prove is DIRECTLY linked to the spacers you installed.

[@dostres23]

Hey Bill, I will be purchasing the CJ Pony Parts lowering spring set for my 2016 GT. I would like to also get these spacers. Should I be concerned about the wheel clearance or anything? Also what is the recommended time to allow for the springs to settle before installing the spacers?

[@cjponyparts]

+Alex Garcia We have customers running that setup without issue

[@dostres23]

Roger that. Thanks!

[@ltdbks]

Which is the torque in Nm for the spacer´s nut? Same wheels nut?

[@ScottSchubel]

Ive had these spacers on for 6k miles. I can't get them to loosen off the factory wheel studs to remove for race application. Is there any technique to get them loose? Spray with WD40? What are you opinions on taking these to autocross? No hard launches

[@EliteGeeks]

use ANTI-SEIZE when you installed them? per directions?

[@petergalanopoulos8868]

Apply heat

[@dailodai9586]

iam so torn, scotty kilmer said its not good, and you say its safe. i don't know who to follow , i listen to both of you

[@jamesl921]

Hey Bill, if I combine these wheel spacers with the progressive lowering springs by Steeda, would i need to roll out the fenders for the tires to clear? (Same tires and wheels as those shown in this video - thanks mate)

[@Straw65]

So I'm just double checking because it isn't brought up at all really but spacers on the front end of a S550 is OK? (Safe?) It doesn't mess with your front end?, Thanks.

[@cjponyparts]

We used them on a car here for years without issue.

[@Straw65]

@@cjponyparts Thank You!!

[@98.infinity]

Will these work with the Eibach sportlines ?

[@cjponyparts]

Yes the springs don't matter unless you have wider wheels.

[@MrDahkilla]

What does torquing actually mean ? Just squeezing it tight ? Also will 2" spacers be safe ?

[@JCTiggs1]

Hi Bill! Are there any handling issues with these 25mm spacers on the fronts? Another Mustang site doesn't recommend putting them up front, although it seems everyone does it anyway lol.

[@a.wheeler7731]

Car handles better with 1 inch spacers, wider front track helps. I made a video about my experience with spacers you can check it out if you want.

[@edr853]

Any chance the spacers could have anything to do with my 15 gt rear hub bearings to burn up and throw the advanced trac and abs service light? Ford dealer tried to tell me the spacers are cause of issue and I'm fighting with them now to have covered under warranty only 23k miles on it. Thanks for any info..

[@jvnasol5754]

is there no rubbing issues if i drop the car using h&r lowering springs?

[@2miles4dacut81]

Ima try that did it work

[@marksill8020]

Do you have to do an alignment afterwards?

[@EliteGeeks]

It is suggested, you wont feel pull but might wear tires faster

[@kryptkeeper457]

These would be good if my lugs actually fit on the studs…. In tiny fine print on the listing it said “metric thread pitch” Y’all need to be more clear with the figment of these on your website. This is my second pair that doesn’t fit. 1/5 stars.

[@hectorjunior9374]

I have wheel spacers that came off a 2015 mustang I thought they would fit on my 2014 s197 the lug nuts don’t tighten up correctly

[@MustafaGT]

Hi Bill, I just bought these spacers from CJ Pony. After installation, I noticed that the passenger rear tire sits out of the fender a bit more than the driver side. The driver side rear tire seems to almost line up perfect with the upper lip of the fender. Is this normal? If so, is there anything I can do to get it to center better? Please let me know. Thanks

[@Zerogivengarage]

Make sure everything is seated and torqued down properly. As long as the car was true before the spacers will not change anything.

[@TheeAmateur]

make sure the bolts are not sticking out beyond tge spacer surface. if so you will need to grind back

[@MustafaGT]

Bill Tumas I think the issue that I have is that the subframe is not centered. I believe the Steeda IRS Subframe Alignment Kit should fix the issue. What do you think Bill?

[@Zerogivengarage]

If the subframe is out of alignment that would do it.

[@XCVi_MAC]

I have Eibach sport lines 1'5, 1,3 inch drop. Would this would out for me ?

[@Zerogivengarage]

+Alex Mac This car has coil overs with a similar drop and no issues

[@XCVi_MAC]

+Bill Tumas alright making sure lol.

[@CharmCityWRX]

Hi Bill I have a 2016 Mustang GT non PP, and i just bought BMR springs and i was wondering can these spacers be used with non pp Mustangs OEM wheels. I noticed you kept mentioning PP on your video. Thanks.

[@Zerogivengarage]

They will work with all OEM wheels

[@CharmCityWRX]

cool thank you

[@christopherdean8198]

Hi Bill, I have the Eibach 25mm spacers for my Uk 2016 Mustang which has the OEM 19" wheels, did I hear you correct that its 125 ftlb ( high?) for the spacer nuts and 150 for the lug nuts?

[@Zerogivengarage]

Factory torque is 140 ft lb. I would make sure the spacers and lugs are at least around 100

[@datboifrmhwi]

Hey bill was wondering how much stress does this do to your suspension if your an aggressive daily driver?

[@Zerogivengarage]

It really won't stress the suspension, more the hubs. As long as everything is torqued right you should not have any issues.

[@홍길동-y3h7q]

부품 주문은 어디서 합니까

[@jacobgonzalez4255]

From the website

[@filippodistefano1011]

Hello dear cj pony parts I own a 2018 mustang gt and i order 1 inch wheel spacers for my stock wheel 19 I find the studs in my car too long And with the spacers i cant put the wheel back on The om studs hit the rims Why? My car is likr yours on the video 2018 Any suggestion?

[@ryanlegue8672]

Magneride equipped Mustangs have longer studs

[@TheCarCrazyGuy]

Are those lugs the solid type?

[@Zerogivengarage]

+scterka They are solid studs if that is what you are asking

[@TheCarCrazyGuy]

+Bill Tumas The actual lug nuts. The factory ones have a thin steel skin that deforms. Are your black lugs the solid type?

[@briang573]

Would these fit the 2018 mustang gt with performance pack?

[@Book20244]

briang573 yes! I installed it on mine

[@miniclip24060]

Do you need an alignment after installing these?

[@EliteGeeks]

you should

[@cosmoquinto2765]

Can I use spacer to make my wheels clear brembo calipers?

[@cjponyparts]

It depends on a lot of variables. What Brembos on what car with what wheels?

[@cosmoquinto2765]

CJ Pony Parts 4 piston calipers to clear some MMD 20x10 45offset wheels on a 2014 mustang. Clearly I will need spacers for my year car, but will they help for clearing the caliper and the spokes not hitting.?

[@douglasbaker5949]

No cutting of the factory bolts with the 25mm?

[@el_sancho_2094]

1:29 pro~~cess

[@VesselFitterguy]

I wonder if this could cause any warranty issues with the steering or suspension or CV axles

[@d3et1roi3t]

5:40

[@lissandrofernandez8750]

Can we use the same nuts?

[@StevenNeidlein]

Hey Bill are 2" spacers too much with ford proformance pack??. I have a 2019

[@waynefree8136]

Are they safe?

[@JCTiggs1]

They're safe as long as you tighten them properly lol. As Bill mentioned, the factory spec for the wheel lugs is 150 ft-lb but for the smaller nuts on the spacers 120 to 125 ft-lb is safe. Also recheck them after 100 miles and then every 2000 miles.

[@davidcami7347]

would you recommend installing only the back spacers and not the front? or is it ok to have some in the front?.. ive read in most places that you should only install the back ones

[@cjponyparts]

Spacers are fine front and back when installed properly.

[@Travide]

Do these work for only the oem performance pack factory wheels? I have oem wheel but not the performance pack ones. After a hating your videos I also bought the borla ATAK and love it!

[@ToG_7]

Bill, was this car on stock springs?

[@Zerogivengarage]

Roush coilovers

[@Rivinis]

Are 25mm spacers on the front wheels safe? Will they negatively effect the ride quality or feel?

[@cjponyparts]

I wouldn't hardcore track them but they are perfectly fine for normal use and this car drove like stock.

[@hamedmarroquin4594]

Hey bill can you use the OEM lug nuts with these spacers??

[@Zerogivengarage]

To bolt the wheels to the spacers yes.

[@simone673]

Hi Bill i just bought Eibach 20 mm spacers on side for my Gt 2015, and i have to cut the original studs by 6 mm cuz the holes on the back of the wheels are not deep enough.. :( is it better to cut the studs or try to deepen the holes in the rims?

[@Zerogivengarage]

stock wheels?

[@simone673]

yup the black ones from your vid, but ive got the European version maybe they differ

[@Zerogivengarage]

I wouldn't think so but possible? I installed the CJ spacers we sell which are 25mm and had no issues at all. I would not recommend cutting the studs.

[@simone673]

thats because they have those extra 5mm but for me 25's stick out too much

[@AbdulKhan-fg8ig]

I ended up using red loctite and torqued the spacers to 110 ft lbs. is this safe or should I torque them a little more?

[@speaker816ify]

Abdul Khan I used blue loctite and did 120... then 150 on lugs

[@Zerogivengarage]

I would not recommend red loctite, it will make removal difficult.

[@speaker816ify]

Bill Tumas blue.... I used the blue. not sure went I said red....

[@AbdulKhan-fg8ig]

I guess I'm going to have to re-torque the spacers 10 more ft lbs since I only torque'd them to 110 ft lbs initially. I used red loctite to ensure they wouldn't fly off. I get paranoid since I do drive the car aggressively.

[@jackiechan7288]

Paul Speaker He was talking to Abdul

[@drchamp1902]

Just ordered a set from CJ. Will these work with lowered springs?

[@cjponyparts]

Oh yes! Thanks for your business we really appreciate it.

[@s550joe3]

Got these black from zy wheel...amazon all four sapcers for 70 bucks

[@zackm3850]

s550joe I’m thinking about doing the same! How do you like them so far? Any trouble installing ?

[@s550joe3]

@@zackm3850 love them no trouble at all......zy wheel 4 piece in black are the ones I have. Couldn't paste the link. But what a difference filling in the space of the fenders

[@justinvillanueva4624]

Can I launch hard with these ? I've seen plenty of spacer fails before and they aren't pretty :/

[@Zerogivengarage]

+Justin Villanueva I would never use a spacer on the rear with a really stick tire and try to launch. For normal street car use you should have no issues

[@justinvillanueva4624]

+Bill Tumas ah awesome i have a nt555 tire with long tubes and a tune do you think it would be able to handle that without issue ?

[@Zerogivengarage]

+Justin Villanueva I wouldn't have any concerns

[@justinvillanueva4624]

+Bill Tumas ok thanks

[@raphaelgraves9449]

Ask about Mr.rimz

[@v-performance]

Pry bar against the threads? I don't think so!!!

[@raudelhernandez4320]

True!!! Just have someone step on the brakes for you

[@james4v261]

doesn't hurt it. would have to really press down to hurt it

[@Zerogivengarage]

+James We had a bet about how many comments we got until someone mentioned the prybar :) Holding the wheel like that will not hurt the threads unless you used some really cheap studs. If you want to do it by another way by all means do so.

[@v-performance]

+Bill Tumas That was fast I guess! Who won BTW? :D

[@Zerogivengarage]

+vmeansvelocity Nobody I said third comment and my videographer had 4th

[@angelsofye1224]

I have 255 in the front and I want it to be flush with the fender, any idea on what size spacer would work best?

[@chriswaters2809]

Hey bill I have a stupid question I bought 1 set of these spacers from you guys for my 15 GTpp but I sold the car and took it off I bought a 17 scat pack charger and I want to buy another set and put both on the charger would this be a bad idea because those spacers are designed for mustang?

[@israelsalasaguilar3245]

Donde puedo conseguir unos amigo?

[@Manuelrive71]

Israel Salas Aguilar Los miss son de American Muscle, $99.

[@miloful1]

do these spacers work on the ecoboost wheels?

[@lifeofky4037]

What kind of hp do these support?