2015 Gsxr 750 stunt build!

Decided to turn my 2015 Suzuki gsxr 750 into a stunt bike. Sold the kawi 636. Parts included in video are. Cocks clip ons, rsc clutch lever, brembo 18 master, ndc handbrake bracket, hybusa big rotor, brembo p34, steel braided brake lines, anarchy customs rear subframe and scrape bar, custom seats with rear build up.
/ @tray8studios Thanks tray8 for the beats

[@rickyrickharris4908]

Man i could really use ur help. I jus put dirt bars on and im wondering what u did about all the cables up front. Id like to see how its all set up

[@BrianSpillWell]

I sold the bike. But if you pause the video at 3:35 you can see the route. I did remover a cable bracket from the clutch for more length. Got plus 3 inches on the brake lines as well. Anything specific ask!!

[@rickyrickharris4908]

@@BrianSpillWell im wondering how long the front break line is oem, because i need to get one with about 5 or 6 extra inches.

[@BrianSpillWell]

@@rickyrickharris4908 5 inches should be enough I know I went like 4 but clip ons are a little lower than dirt bars. And I had a little xtra line still

[@alanluscombe8a553]

How did you run your air cleaner for longer wheelies and what else did you do to the engine to make it wheelie friendly? Sick bike man good job and do you like it as a stunt setup? I have a 636 but I’d love to ride a gsxr

[@BrianSpillWell]

Sold it two weeks ago. Was too heavy n twitching on the throttle for wheelies. Got a 2022 636 new build will be up soon.

[@alanluscombe8a553]

@@BrianSpillWell yeah makes sense I’ve heard that about the gsxr from others. The new 636 is an amazing bike I rode a stock one a couple weeks ago and it was great. Mines an old 05 06 but I love it. Good luck on the build I’ll sub hopefully you’ll post a few things about it. Thanks for the answer

[@BrianSpillWell]

@@alanluscombe8a553 yeah I loved my 03 636 for wheelies. So I had to go back new ones feel so light n torquey .

[@alanluscombe8a553]

@@BrianSpillWell yeah they do, the one I rode definitely had a lot more throttle response and feels like a ton more power the way it is built. I think they only have about 4 more horse but I’m not certain. Great bikes though I’m jealous I wish I could buy a new one. With stunt parts set up on the new bike it will be killer for sure

[@beefyslife3473]

Looking tight

[@BroCraft767]

im building a 2020 750. steel frame and all. how long did your anarchy sub frame take to come in ? also did you do a clean air mod ?

[@BrianSpillWell]

The frame took about a month, and no clean air mod! Just got it on a 58 tooth sprocket. Getting use to it

[@romanzarate3251]

Send it 🔥🙌🏼

[@QuickRipzz]

How does this compare to a zx6r 636cc? I'm trying to. Decide between that and a gsxr 750??

[@BrianSpillWell]

636 mad cheat code !! 750 heavy and balance point is way way back. Gotta work fo these.

[@QuickRipzz]

@@BrianSpillWell wow, I think I have my decision! Thanks, bro!

[@BrianSpillWell]

@@QuickRipzz way more parts as well! 750 super limited.

[@QuickRipzz]

@@BrianSpillWell wonder how you feel about an mt09 vs a zx6r 636cc for a stunt bike?

[@robmuhfacka5986]

@@BrianSpillWell what about the zx10? Are they good like the 636s or are the 6s just perfectly built for wheelies? Haha I'm curious because I'm going to upgrade my bike next week or so and am wanting either a gsxr 750 or possibly stepping up to 1000 not sure yet BUT the ninja 636 has been everyone's choice when telling me what I should get haha 😂 idk tho if I can get a zx10r gsxr1000 or R1 I think that may be what I decide between

[@johnhairston7364]

Sprocket size for beginners you recommend

[@BrianSpillWell]

Depends what type of bike. Typically going up 4 teeth in the rear is good enough. Not like you will be hitting circle wheelies off cuff lol.

[@alexrodriguez3254]

What up new to the channel I like the content🤙🏼

[@BrianSpillWell]

Thanks buddy! I got a few new videos coming this week should be some great content!!

[@alexrodriguez3254]

Hell yea can’t wait bro stay up . Keep tearing them streets 🤙🏼

[@nasarkhan2218]

Hi, How to bypass the clutch switch on a GSXR, when installing a stunt clutch lever. Mine is going into limp mode.

[@BrianSpillWell]

You have to run a toggle switch! I got a cheap one from my local autozone. Just run both wires from the clutch switch to the new. Turn it to start then flip it again when on so the f light doesn’t pop

[@nasarkhan2218]

@@BrianSpillWell You mean, connect a Toggle switch to the two wires removed from the clutch switch. Then when starting the bike, i will turn ON the toggle switch and turn it OFF, when the bike Starts.

[@BrianSpillWell]

@@nasarkhan2218 exactly

[@riolaflare7180]

🔥🔥

[@Fresh27inc]

What size clutch wire u put on there

[@BrianSpillWell]

I’m. It sure the exact but it was +3 inches over stock.

[@Fresh27inc]

Were did you get the clutch cable from my bike been sitting

[@Camrayd]

What kinda bars you running?

[@BrianSpillWell]

Cocks stunt parts clip ons

[@nasarkhan2218]

Any idea on how to raise the idle speed on a GSXR 11?

[@BrianSpillWell]

They sale idle screws!! The sic shop.com

[@rickyrickharris4908]

Ya but dnt u have to get it mapped and tuned or somthin. Lets say literally 2500 is all i want

[@riolaflare7180]

What’s your bar setup??

[@BrianSpillWell]

Cocks stunt parts clip ons