2015 honda accord ABS motor replacement

[@dj6eyes]

The fact you were able to put it back together so quickly is insane

[@sonyyoung1036]

Thanks for the info. I know you say you have to take the entire unit out to change motor because of those 2 spring loaded pins. But now you have to bleed the ABS module and to do that you need to activate the ABS motor. This requires proper scan tool that can do that. Both ways have different challenges or equipment.

[@cahanfowler1136]

That was amazing. I'm never thought you would be able to get a tool in there.

[@moby7656]

@Sony Young Take the 2 battery terminals off. Then remove the ABS pump... after removing the pump... put it back in the car after changing the motor.... connect back all brake lines and harness.....when all is completed power too..manually pump the brake to bleed the brake from the back caliper, on the opposite side from ABS module. all 4 calipers

[@moby7656]

@Cahan Fowler I catch my a** trying to put it back in and that's the way I found how to put it back.

[@johnjkizer6399]

Actually you can manually bleed the brake line, before doing this install simply disconnect the positive battery terminal and when complete reconnect the battery terminal and simply bleed brakes normally.

[@osvaldoesquivel5633]

I live in a place where the climate is always hot, and the abs never gets used, I just unplug the abs when the lights come on and my car is running static due to abs. Unplug it 😊

[@Abe-ny1dy]

Buy the whole piece