2016 Chrysler Town & Country Oil Change

DIY Oil Change for a 2016 Chrysler Town & Country Van
use a flat type screwdriver and 2 sockets a 1/2 Socket and a 24mm Socket for tools.
I forgot to mention in the video to lubricate the "O" ring of the filter with a dab of oil

[@johnnyaquiles8631]

Toe nail was the reason i left a good review

[@H2R5GSXR]

The good informative video gave me the courage to change my own oil. That filter had me concerned. Thank You.

[@greetswithfire1868]

Good video. Changed the oil in my 2015 Grand Caravan yesterday. The benefit of doing your own oil changes is inspecting everything else while you're there. BTW nice toenails. LOL

[@user-bq9pd2ld5v]

Nice to know how to do it yourself

[@timsmitchell]

Thanks for sharing this video. It gave me the confidence to change my own oil, oil filter, and air filter! Also, to clip my toenails. Teehee.

[@jeromeking2793]

Buddy, all you have to do is remove the plastic engine cover and use a shorter extension. ABSOLUTELY no problem!!!!!!

[@dedimk]

Thank you that was useful information

[@sanverc]

Thanks for the nice video and a nice tip at the end :)

[@lioncub7816]

This is a👍👍👍 vlog.

[@jamespayton558]

Hey man thank you for making the video AS it helped us out!!!!

[@richardresendez2325]

Thank you

[@rellim21]

This guy is awesome

[@janjakubec1864]

Hi, thanks a lot for sharing your video! 👍 I bought my Chrysler Town & Country 2016 just two weeks ago, so I do not know about it too much. But I'd like to manage to change my oil and filters myself anyway. My question is: (concerning reseting the computer) how can I turn thw starter into the first level, if I have a start button, not a key lock/hole...? Because everytime I press the button the car starts immediatelly... Thanks a lot for your responce. Jan

[@matthewluebeck4112]

My filter is stuck. I got the oil drained out and the plastic cap off of it but the paper filter won't come out. It spins freely but won't come out.

[@flottagraphics]

I purposely searched to see how the filter parts fit back together. I really wish this video showed the spring and how the plastic parts went back in.

[@bigbd1890]

Appreciate Cannabliz….

[@johnnyaquiles8631]

Good video

[@flottagraphics]

Sorry, I was referring to the oil filter socket size. I suck the oil out from the top using a vacuum device that requires my compressor.

[@azzir325]

Regarding your power steering fluid, check it again with the engine at normal operating temperature.

[@peteyaskell6815]

Video is pretty good but two things should have been poerformed....if you not have a torque wrench, mark the plastic oil cap with a marker at 12 o'clock so when you put the plastic cap back on tighten back to 12 o'clock which will give you roughly the proper torque rather than cracking the cap like this guy. Also after putting in 5 quarts of oil, start up you engine for about 30 seconds, which this guy did not do....check the dipstick and you will need to fill with the 6th quart, that is the max capacity.

[@420mariajuana420]

I'll do that next time thanks

[@brucehildreth7109]

Thanks!

[@brucehildreth7109]

Thanks!!

[@theintruder77]

Please remember to run a bead of new oil around the new O ring on the filter cover before replacing.

[@420mariajuana420]

Yes I forgot to mention it but I did mentioned on the video description

[@wayneburnette7763]

What size puralater oil fifter does a 2012 caravan need?

[@jeremygraham4776]

Wimpy tighten, lol

[@samuellujan7525]

How many quarts of oil?

[@cannabliz4988]

6 for this van

[@DEEJAY7950]

6 Quarts on my 2003 and 2014, should be same!

[@jeromeking2793]

Or 5.5L if you are Canadian, eh? Sorry...

[@flottagraphics]

Wrong size socket, should be 7/16