Removing the driver side door panel , passenger side is the same to remove.
Пікірлер: 52
@z00miezoom146 жыл бұрын
Dude. You are the man! Thank you for taking the time to show this!
@tintguy1016 жыл бұрын
Z00mie Zoom no problem glad to help !
@Kai_.L Жыл бұрын
A video like this should exist for everything. Simple and on point for what I was searching for.
@markmontgomery256211 ай бұрын
YES SIR that helped me out. Saved me from breaking a bunch of plastic. Thank You
@richardmilner84695 жыл бұрын
You're tutorial is an answer to a prayer. My door panel has an upward bulge in the topmost portion allowing a gap next to the window. I'm putting in heavy duty velcro to fix. Much thanks, amigo.
@cgunnerII5 жыл бұрын
Were you able to fix it? I have the same problem.
@richardmilner84695 жыл бұрын
@@cgunnerII Working on it.
@TechDanZ5 жыл бұрын
I also have the same problem, I called Porsche this morning to see if they'll Good will it. Check this is. www.planet-9.com/981-cayman-and-boxster-problems-and-complaints/232019-door-panel-warping.html
@kevinmcdonald42334 жыл бұрын
i got it too! only passenger side, though.
@jevdedalus11773 жыл бұрын
@@kevinmcdonald4233 Got a 14 Cayman with the same issue... New door panel quoted $5k!!! Gonna pick one up off Ebay for $200 and swap it out myself.
@TubeYouDavidpearce Жыл бұрын
Great video, many thanks, helped me a lot to change the door check arm. When pulling up on the door card to remove it, try to hold the plastic sub frame underneath the material as the material can pull away easily on the side furthest away from the a pillar.
@luissosa3082 жыл бұрын
Thank you for such a great and easy video. It was very helpful.
@gregghansen3614 жыл бұрын
thanks for doing this - made it very easy to swap my window switch
@Adsral3 жыл бұрын
I am watching this as need to replace my window switch too - is the switch replacement just pull out connector of old one and then install into new one?
@fluxrunner6 жыл бұрын
Good job Tint Guy! Short and sweet... Thanks!
@jcborden1002 жыл бұрын
Super useful video thanks. When doing this on my 981 the cable was so short there was no way to hold with pliers (or anything). However taking the door card off is a three minute job and then I could hold the push the connector on from the inside. So simple).
@dapbubba2 жыл бұрын
Thank bro for making this. I need to glue the top of my door panel and this helps alot!
@jamesdick68515 жыл бұрын
Does anyone know how to repair the top seal of door that has popped up due to sun exposure?
@da_bimma4 жыл бұрын
My cayman S has this problem right now
@dlindf4 жыл бұрын
bringing it to an upholstery shop here in WA. Cheaper if you just bring them the door panels so they don't have to take them off and remount them. Quoted $200 per door by the shop. Will post a vid of what the repair looks like when I get it back next week.
@gluckhunterjr.93443 жыл бұрын
I got lucky. Took mine in for maintenance and they just replaced both door panels since it was a CPO
@dlindf3 жыл бұрын
Did a pretty good job. They mainly fixed the delamination between the outer panel and the underlying plastic. One flaw of bringing the door panels only to the shop is they don't know exactly how much to heat and mold them down to match the door edge. I ended up putting them in and then taking them out again. I used a heat gun to heat the underlying plastic until they fit flush on the door.
@shaunallison61852 жыл бұрын
Thanks for the video, very useful for me when changing my caymans speakers
@adamdavila25723 жыл бұрын
Thank you! Really appreciate the detailed instructions.
@dndodd1006 жыл бұрын
Thanks so easy one note my bolts were t30
@artmason116 Жыл бұрын
Helped me perfectly
@mikem47086 ай бұрын
Great help ! Thx
@adamnieto2859 Жыл бұрын
Appreciate this!
@slimshady50252 жыл бұрын
Good video thanks
@k.j.g.96016 жыл бұрын
Awesome! Please do the dash next!!!
@handyishrandyish3343 жыл бұрын
Awesome video my bolts where t30 though
@stefankoch93793 жыл бұрын
Most excellent... Thanks!
@manjesong1731 Жыл бұрын
Thanks
@masterSe7en77 Жыл бұрын
its a T30 :) but thank you
@timburton73074 жыл бұрын
Very similar to my wife's Audi A1, same connectors etc
@thiagoquiterio15235 жыл бұрын
Thanks bro. Helps a lot.
@Hypersonik3 жыл бұрын
Yup, helped me a bunch thanks a lot :)
@Gery89882 жыл бұрын
What kind of tool are you using here? The golden card, is it out of metal or plastic? I can't find it on the market. Thx
@whiterhino092 жыл бұрын
In this video I use a gold Teflon card for vinyl installations
@Gery89882 жыл бұрын
@@whiterhino09 thanks a lot
@terrylessmann22745 жыл бұрын
Did you disconnect the battery first?
@gluckhunterjr.93443 жыл бұрын
"You don't have to remove it. There's a catch to keep it in place but I'm going to remove it because it's in my way." Well then I'm going to remove it too because you know a whole lot more than I do...
@alexistheghostman4 жыл бұрын
Just curious, did you disconnected the car battery before removing the door panel?