A tip from the great white north. Smear never seize on all studs and bolts before assembly,to allow for easy disassembly down the road. Up in Canada "We put that shit on everything!"
@Giant-Bearded-Face4 жыл бұрын
Question, not trying to nit pick because I am by no means a professional but isn't the point of the divorced downpipe to separate the IWG valve and the actual exhaust gases? Wouldn't you lose the added benefits of separating the two if you have an EWG? If going with an EWG, I personally feel you would see bigger gains with just a bellmouth downpipe. Just my 2 cents
@Precisionmagert2 жыл бұрын
The double nut technique is something I never thought of..
@GrimmSpeed2 жыл бұрын
😎
@cynoshifter5 жыл бұрын
The GrimmSpeed J-pipe was probably the hardest of the mods I've done on my car. A word of advice, do exhaust as soon as possible! The more miles you put on your car the harder any exhaust work will be. At 28k miles I broke a turbo stud and two bolts. As stated in the video whether you have a sti or a wrx, getting those heat shields out of the way helps big time. I'm enjoying this build, can't wait to see more!
@GrimmSpeed5 жыл бұрын
Very true! The longer you wait, the harder its going to be. But as long as you are patient and use the right tools for the job, it can be done!
@connorhogeston27264 жыл бұрын
That is crazy, I put a downpipe on my '12 sti at 75k miles and didn't break anything
@paulmarsdensr10953 жыл бұрын
Great work, guys. I own a base model 2017 WRX. From my perspective it looks like the engineers from Subaru did a good design on the STI engine as far as the turbo,the waste gate. How much does it cost to do the modification that you are doing on this video? A great video, guys. Subies forever. Grimmspeed makes great products. If I were to mod my subie it would be with your products.
@momoknows2 жыл бұрын
86$
@guerraxx5624 жыл бұрын
Did you guys make a custom lower bracket for the turbo heat shield , since the new up pipe does not have the screws for the oem one?
@Jabbazuki3 жыл бұрын
Do you guys have the limited downpipe in stock right now? I am looking for one for my 2021 STi and can't find it anywhere lol
@jvmbi37284 жыл бұрын
Hello! I was wondering what is the external wastegate block off on the website? Im set on this up pipe but not quite ready for the ewg just yet. Thank you!
@wrxstivideos74224 жыл бұрын
Did you find it I’m looking for it too.
@jvmbi37284 жыл бұрын
Wrx sti Videos yessir! EWG BLOCK-OFF PLATE is what it’s called on their website! Found it right after looking all over lol.
@wrxstivideos74224 жыл бұрын
Jvmbi same lmao
@jvmbi37284 жыл бұрын
Wrx sti Videos ayyy
@warock5672 жыл бұрын
Does your guy downpipe throw cel code for 2019+ with the new cobb green updates?
@GrimmSpeed2 жыл бұрын
As most downpipes in this class, it can.
@DjRuBSP3 жыл бұрын
I tried looking for up-pipe on your website. Do you guys still sell or make this version?
@GrimmSpeed3 жыл бұрын
Hey Ruben! Unfortunately the EWG-Version Up Pipe has been discontinued, however we do still manufacture the standard non-EWG.
@rubberlessg2412 жыл бұрын
@@GrimmSpeed Because its discontinued, what do you guys recommend for a 21 STI? EWG verses IWG?
@hangmanfsc5 жыл бұрын
Why not finish if off with the new catback?
@thenotorious_a_r_t5 жыл бұрын
hangmanfsc the car actually already had a GrimmSpeed Catback installed, look closely at the downpipe bolt tightening scene!
@hangmanfsc5 жыл бұрын
@@thenotorious_a_r_t ah didnt notice, right on!
@ICON-11-4 жыл бұрын
Do you guys know the exhaust diameter of the 2020 sti? I'm looking to get the cobb turboback exhaust system with 3 inch downpipe/catback. Wondering if this could be put on a completely stock sti without tune or other modification needed?
@benharbin12414 жыл бұрын
Downpipe will always need a tune for Subaru. If you change any engine, intake, or exhaust piping (except catback) it's best to tune
@calvinjames82918 ай бұрын
Apologies for the long message in advance.... I'm new to the STI platform and have a question in regards to the up & downpipe. I have several big HP GM LS & LT vehicles ranging from 630whp to 1,017whp. So in no way, shape or form am I trying to build this car, but want it to run the way it should once the real tuning starts. I recently purchased this STI to replace my Focus ST, which was my daily. Immediately, the STI became the far more fun to drive vehicle than the ST ever was, and can corner nearly as stable as my CTS-V3. Long story short, the STI ran good with the patches the used car dealership done to sell the car or the previous owner stripped it before selling it because there are signs where an AOS would've been located, or possibly a DP by looking at the broken zip ties. The car currently has the SRS non muffler axle-back "and sounds great", Cobb Carbon Fiber Intake, and an OTS map. I recently replaced the turbo inlet due to half of it being mounted onto the turbo with the bottom nearly halfway in the turbo itself, so I replaced it as well with a Perrin. Car ran fine for a few days, but the PCV valve that I thought I cleaned up pretty well stuck again. So, it's torn down again at the moment to replace with a new OEM piece. While I have a lot of the shielding off to put new clamps on the turbo drain, I want to know if the DP and UP worth it? More than likely I'm going to go catted since I don't want it excessively louder than what it is, but wanting to cure the well known problems that exists, along with the weight, and bulkiness in itself. Is it worth the money, what's the typical whp gains, and overall driveability/reliability of the car afterwards? As far as the DownPipes, are there any benefits with the divorced DP and the standard DP? At the moment I'll be keeping some type of recirculating BOV. May upgrade once tuning, but don't plan to vent to the atmosphere. Understand that the FP may have to get upgraded, but hopefully you can tell me yes or no. But the car will not see E85, and only pump 93.... Will the Injectors be enough for those few boltons? 2019 STI Base & thank you in advance for any info provided.
@Kiss__Kiss4 жыл бұрын
Good video... Subscribed.
@GrimmSpeed2 жыл бұрын
Thanks for the sub! We appreciate the support!
@diegosti97413 жыл бұрын
WHATS THE LINK FOR THIS UP PIPE CANT FIND IT ON YOURWEBSITE THANK YOU
@GrimmSpeed3 жыл бұрын
Hey Diego! Unfortunately the EWG version of our up pipes has been discontinued.
@diegosti97413 жыл бұрын
@@GrimmSpeed is there any other brand or so that makes them?
@GrimmSpeed3 жыл бұрын
@@diegosti9741 not sure on that one, you'll have to look around online!
@noxnyc234 жыл бұрын
You selling that stock down pipe?? Il take it off your hands 👊🏼
@noneofyourbusiness56554 жыл бұрын
I am selling my stock down pipe
@theSEGAtwistisover9k4 жыл бұрын
how to get down pipe in Auz please I want to make my car happy 😥
@GrimmSpeed3 жыл бұрын
Visit our list of retailers in your area. www.grimmspeed.com/retailers/
@noneofyourbusiness56554 жыл бұрын
I love you guys.. but you don't show how to... you show kinda nothing. Lol
@lancelow62105 жыл бұрын
He kinda sounds like joe from family guy lol Good informative video though