2018 Focus ST | VLAND Headlights - Morimoto D2H Elite Kit Install

[@wilsonsmunoz2453]

Hello, when I installed the headlights, an error appeared on the dashboard screen?

[@dawsonmoves]

Did you get the HD relay harness? I just swapped over to the HD relay harness (trying to figure out how to get both headlights working 100% of the time) and have the "low beam fault" message on my dashboard too. I originally used the PWM Canbus harness and didn't have any issues. I've been in touch with Morimoto trying to figure out this headlight issue and they've been great, sent me everything under warranty. I suggest you get in contact with them

[@ericsong7284]

Do your DRL's work without having your headlights on like the OEM's do?

[@dawsonmoves]

No, they have to be in either parking or low beams to be on. Unfortunately this seems to be an issue with every aftermarket headlight. I have seen somebody wire their vland DRLs to an aux fuse (I think?) on their BRZ but I haven't checked if these headlights came with the wiring to do that. I'll keep an eye on the forums or maybe try some things out to see if there is a way to get the DRLs to work

[@HidingFromJessica]

Pin 12 to slot 1DLR

[@saveongaming4418]

Hey man could you provide a link for the D2H kit

[@dawsonmoves]

Sure!! Here you go: www.morimotohid.com/morimoto-elite-d2h-hid-system?quantity=1

[@aCONSCiOUSxMiND]

The beams are supposed to be that way. You have a LHD so the drivers side always needs to be lower in order to not blind oncoming traffic. I am looking to order these but I cannot afford the Morimoto set to throw in there & I’d definitely need to figure out that pin situation 🤦🏻‍♂️

[@HidingFromJessica]

Says move pin 12 to slot 1

[@dawsonmoves]

Makes sense. I got the headlights and Morimoto kit when they were on sale during Black Friday. I think both were 20% off. Here's the link to the pin swap: kzbin.info/www/bejne/b4emeZisj6x5gNUsi=2YInG7r0NuKH6xi_ It's like $10 for the tool and you can get it at an o'reillys or Amazon. The headlights came with a wiring swap for the pins but honestly I didn't really trust it lol

[@HidingFromJessica]

How's the cpe fmic did you go big turbo? What tune do you run?

[@dawsonmoves]

@@HidingFromJessica so far it's been great. Charge temps are usually 3-5 degrees over ambient temp. I'm currently stock turbo running e30 tuned by JST