Wsan't there a second smaller O ring that goes under the oil filter drain plug?
@seantorbett28892 жыл бұрын
Good video with good lighting and easy to see the work being performed. However, one thing I noticed is that it appears that at 10:30 the o-ring is missing from the filter cap/cover when it was installed.
@pawelfronczyk1579 Жыл бұрын
Next video, oil is leaking from under the car, I forgot to put small O ring under filter drain plug.
@miltonmartinez68112 жыл бұрын
Great video! where does the small ring gasket goes?
@tdj652 жыл бұрын
Excellent video. Super straightforward and nice camera angles. Thanks my dude.
@786Garage2 жыл бұрын
Glad you found it helpful. Thank you
@njsongwriter2 жыл бұрын
Actually, the oil filter cap wrench you're using is the wrong size. No biggy cause it still works but if you look at it closely next time you have it off you'll see that the slots on the wrench don't engage with the tabs on the oil filter cap. See your video at 7:16. That wrench fits the 1.8 liter Toyota built engines. All larger engines take a larger diameter wrench but both have the same 64.3 mm diameter with 14 flutes at the top end of the oil filter caps. The opposite ends with the threads is the end that's different. Also, it's very easy to remove the o-rings without tools... kzbin.info/www/bejne/l2GnkKl9e8x_epo
@786Garage2 жыл бұрын
Thanks for that detail. Makes sense now why its so tight
@Cdr3068 ай бұрын
Please don’t say you did not use jack stands? That would be really dumb. A friend of a friend died changing his oil w/o using jack stands
@ajitshanbhag72882 жыл бұрын
Very nice instructions and video. Thanks
@stefchu1 Жыл бұрын
Yeah, he didn't mention about the smaller o ring that goes on the first plug that's removed, also I've seen where you can put a fair amount of oil back in the filter before you reinstall it. either way...
@garyamaral9905 Жыл бұрын
Loved it!
@paulmiller553111 ай бұрын
Thanks for the help! Good video. 0:40
@786Garage8 ай бұрын
Thank you
@Lovelyg11 Жыл бұрын
Thank you for this, going to try on my own , used to always watch my brother do oil changes.
@condor56352 жыл бұрын
Nice work but Jack stand(s)???
@graphene14877 сағат бұрын
why must it be so freakin' complex these days?! For crying out loud?!