2019-2020 RAM 1500 S&B Cold Air Intake w/ Oiled Cleanable Cotton Filter Review & Install

Boost your RAM’s power and performance by installing the S&B Cold Air Intake with Oiled Cleanable Cotton Filter. S&B designed this Cold Air Intake to outflow the factory intake by 50.64%, resulting in additional horsepower and exceptional torque gains for your daily drives and all-terrain adventures. What's more, it facilitates improved driveability by delivering a higher volume of cooler, denser air at a faster rate for enhanced airflow dynamics.
This Cold Air Intake System maintains proper air-to-fuel ratios without the need to re-program your RAM's computer to operate. Simply bolt it on and you're ready to go. AmericanTrucks, however, still recommends a custom tune to reprogram the ECU to get the best possible performance from this intake.
The Oiled, Cleanable Cotton Air Filter included in this intake kit features enhanced filtration technology with high durability and optimum filtration capacity. Its multi-layered cotton media is designed to significantly increase the air volume directed to the system for maximum airflow while maintaining high filtration efficiency.
With its premium materials and high-quality craftsmanship, this Cold Air Intake System is built to withstand high mechanical impacts and elevated temperatures. The large-diameter intake tube is engineered to minimize air restriction to deliver the most efficient airflow dynamics. This intake kit also includes a fully-enclosed air box to keep the hotter surrounding air from entering the system. In addition, the large, clear lid facilitates easier monitoring of the filter for a convenient maintenance. amtrucks.at/39...
Shop this S&B Cold Air Intake w/ Oiled Filter: amtrucks.at/39...
Subscribe for Weekly RAM Truck Videos: bit.ly/2G7fgWv
Item R110227
----------------------------------------------------------------
Subscribe for Weekly RAM Truck Videos: bit.ly/2G7fgWv
Stay in the loop for other truck content:
Instagram: bit.ly/2pReXWs
Facebook: bit.ly/2pBz6AC
AmericanTrucks.com is your home for everything RAM We offer the top mods, price-matching, and have a team of the best RAM experts around.
💥 muscle.am/YTSho... 💥

[@AmericanTrucksRam]

Shop this S&B Cold Air Intake w/ Oiled Filter: amtrucks.at/395pGnq Subscribe for Weekly RAM Truck Videos: bit.ly/2G7fgWv

[@donaldburcham1837]

There are a couple of small glitches I encountered with my S&B Cold Air Intake on my 2021 Ram, Rebel. There are 2 additional screws holding down the mfg, air box which were not mentioned in the video. There are only 2 noted in the video but there are 2 more from the bracket to the air box. Due to molding on the wheel well, I had no option but to "chew" off the 2 additional mounting screw, plastic nuts, for the mfg air box. My other option was to remove a bunch of fender molding. The box pulled off fine after that. The entire install took me 4 hours. BUT I'm 73 and I only have one working hand due to recent hand surgery and my wife of near 50 years was good enough to hold a wrench when needed. No complaints. I tested the truck and the hesitation I usually get upon acceleration was GONE! I felt more power! I'm certain! I previously installed a catback exhaust system. Now the "air pump" is a success. The S&B air filter is an integral part of that! Thank you.

[@adamwiedner5701]

"It's a bit of a struggle but it gets in there" - understatement of the year. I'm still fighting mine

[@Touchedbyapriest]

I did this on my lunch break at work. Was simple and easy. Had to rewatch install video to make sure I was right 😅

[@AmericanTrucksRam]

Thanks for watching! -Zach

[@bombidude]

I just ordered one for my 22 ram

[@ipoleiikaikadiaz3]

Minute marker 14:08 says chrome line should be facing down was an error on my install the clamp wouldn’t hold it in place no matter how many times I tried to adjust it so I turned it and faced the chrome line up and BINGO 🎉 it held as tight as a glove. Hope it doesn’t affect anything

[@gray_wolverine63]

First of all you need to disconnect the negative terminal off the battery which he didn't do.

[@kmerdita84]

I’m just upset that the breathing valve came plastic not as shown here as metal with your insulation

[@HandOftehEmpirez]

Do you have to disconnect the battery?

[@eriksalgado5984]

Where can I get a breather line replacement?

[@AmericanTrucksRam]

I would try reaching out to S&B directly! -Zach

[@ittypomeranc1743]

Does anybody know if this works for the 3.6L v6

[@carlosbenitez3619]

Does leaving the lid off make the intake sound louder at all?

[@AmericanTrucksRam]

It would make the intake sound louder, yes! -Zach

[@platano4life722]

But allow more dirt and particles in

[@7171-Ws6]

Doesn’t sound any different. Save your money

[@crunklescrunkles4425]

Any before/after dyno comparisons to see 50% more airflow?

[@user-ik4br3nk2w]

[@samh.7188]

This wasn’t too difficult of an installation. I do have to say the hardest part was removing the hose clamps since I didn’t have the red crowbar tool he was using. It took about 3 hours total from start to finish.

[@robdavidson2274]

Would the plug be recommended for Florida?

[@badbob-1923bob]

Do you need to disconnect the battery S&B telles you you need to ?

[@ericknavarro8731]

Recommended, I found that disconnecting the battery helps avoid the check engine light and helps reset the air reading saved on the computer. If you disconnect the battery before starting and reconnect when done. That should be just fine

[@miguelherrera4414]

Can we do the smoge, with this intake CALIFORNIA???

[@cbr600rrturbo]

Hi I just put a borla atak cat back system on my 2020 ram 1500 5.7 I was looking at getting a cold air intake to, do I need to upgrade my ecu or get it tuned? Thanks

[@wcfirefighter3]

How do you like that exhaust? I have the same one coming in this week and also picked up this intake.

[@HealthTokLLC]

No dyno testing???

[@RC.56]

Why not just get a non oiled filter. Same flow. Also for the pipe, they make stainless, carbonF and this plastic. For heat retention and build up. What’s best?

[@diegocardoso3874]

I followed all the steps I really liked the help but I have just one question as I said I followed all the steps I connected the sensors correctly but when I finished and started the car my ignition light came on. what do ? reset the computer?

[@marks5439]

Where did you get the breather line fitting? Mine came with a crappy plastic one

[@eriksalgado5984]

By any chance have you found a replacement? I accidentally broke mine 😅

[@Martrydom749]

I think earlier versions before Covid had the aluminum fittings. I got a crappy plastic one too…

[@dancioloca5151]

Anyone else get a check engine after install? Battery reset might clear it. Can only be the air sensor right?

[@angryace4017]

Are you guys an authorized S&B dealer? I don't see you listed as one on their website.

[@Colorado_Chris]

Let’s see some dyno numbers .

[@ArrestedCoot578]

video title say 19-20; Will this fit 2021?

[@AmericanTrucksRam]

It absolutely will! -Zach

[@shirocp]

If it fits a 2021, then is it safe to assume it’ll fit a 2022 Ram 1500, 5.7L? Thanks!

[@ayyy9017]

@@shirocp yup any new body style

[@Syn-gm2yw]

Is there replacement oiled filters available if needed?

[@nathanguitar2032]

Any downfall to leaving the lid off other then it might require more maintenance?

[@lonestar8190]

Buying a new filters more often lol

[@lonestar8190]

“Cold air intake”

[@Martrydom749]

Seeing as this is a closed box setup and has a snorkel in the front I’d say most definitely. Only difference from the factory version there would be less airflow restrictions..

[@darrellsyrnyk6875]

Hi, I've looked at various kinds of cold air intakes . Thy all seem to do th Sameas the others . I've found making my own cold air intake. Was fun, Informative and my truck breathes so much better. In my air box is a K&N panel filter, the air the box gets comes from a 4 inch opening . The air comes in via a tube that opens up to 5 inch from 4 inch. Lol it looks like a elephants trunk hanging down the factory box to where cooler air away from the engine. So much more power In take off . The only tube not changed out is the one from the engine. Seems fine for now.

[@グーグル翻訳-k7n]

Followed this step by step for my install (2021 Big Horn 5.7) and it was dead on. Thank you for the post

[@AmericanTrucksRam]

Thanks for watching and we're happy it helped! -Zach

[@robertl317]

Couldn’t agree more step by step easy install also have a ( 2021 bighorn 5.7