Why not do a dyno before and after test so we, the public, can see real world results!
@Idiot_in_a_truck10 ай бұрын
I'm going to use this when I get my intake I'm barely learning at 15
@BigToe_843 жыл бұрын
Used this for my install...flawless thank you!!
@PhastekTrucks3 жыл бұрын
Awesome! So glad we could help!
@sphinx51019 ай бұрын
Which one flows better in your opinion this k&n one or the rotofab ?
@raultv7603 жыл бұрын
Great video, you made my life easier when installing mine 👍💯
@PhastekTrucks3 жыл бұрын
Glad we could help!
@sylvestertownsend15202 жыл бұрын
Excellent video, easy to follow instructions, made my decision much easier to purchase the K N Intake.
@sphinx510110 ай бұрын
When u push the lid down There is no way it fully seals ? So it must under load suck hot air through the gapes
@bdot1127 ай бұрын
Running mine with no lid on it. Sounds extra aggressive 😂
@Something-New-9 ай бұрын
Anyone know the part number for the crappy plastic retaining clips for the radiator cover? I broke almsot all of them smh.
@07BLUESTI4 жыл бұрын
Have you did a dyno before and after to check the facts on HP claims?
@nikmoleena3 жыл бұрын
Think Im ready to install mine...after this rain.
@PhastekTrucks3 жыл бұрын
👍
@dc4l157 Жыл бұрын
Why didn’t you put hose clamps on both ends of the breather hose? This is what happened during my install, it caused the vehicle to stall when accelerating heavily!
@josemijares524411 ай бұрын
Me hubiera gustado que se viera el filtro rojo pero gracias
@joannecurtis61393 жыл бұрын
Today i learned something!
@PhastekTrucks3 жыл бұрын
Glad we could help.
@86ortega Жыл бұрын
my 6.2L 63-3110 kit did not a place on the box for the rubber feet or the rubber gromets What int he world?
@rcothowally3630 Жыл бұрын
My air intake is on the passenger side… is that common on the older style body?
@sphinx510110 ай бұрын
Would the filter suck on hot air from where the lid gos on I don’t see how that would fully close it up when the engine is sucking hard will it not suck air from there ?
@christhonert2594 ай бұрын
What's the best way to clean these filters? Do i really need to buy their maintenance kit???
@joeyperry31313 жыл бұрын
Does this video also be the same for 77 k&n
@PhastekTrucks3 жыл бұрын
Installation is not going to be exactly the same since this install was for the closed box version of the intake but it will be very similar for the 77 series.
@GAlf-cx9mb Жыл бұрын
Tell me why you make it look so easy to remove those ten clips lol
@dc4l157 Жыл бұрын
I installed this K&N kit on my GMC sierra 6.2, when I accelerate heavy the vehicle stalls as if it’s not getting enough air, is this normal? Basically a HP loss!
@reelflare78284 жыл бұрын
Do you have one for the 6.2L
@PhastekTrucks4 жыл бұрын
This intake will come with the parts to fit the 6.2L.
@mk6woods8554 жыл бұрын
Do you have anything for the 2.7 turbo? Or will you be creating one?
@josepineda32433 жыл бұрын
I installed my Intake and later on the check engine light came on any suggestions what could be??
@PhastekTrucks3 жыл бұрын
It could be that the key was turned on while the sensor was unplugged. We would suggest clearing the code and seeing if it comes back.
@josepineda32433 жыл бұрын
@@PhastekTrucks I disconnected the battery for 15 mins and the day after that the light still came on Would it be the sensor?
@PhastekTrucks3 жыл бұрын
@@josepineda3243 It could be, it all depends on what the engine code you are getting is. Knowing that would help a whole lot better.
@palerider553 жыл бұрын
All I hear from forums is that you will get a check engine light with these, that's why the GM performance parts CAI comes with an ECM flash for the MAFS sensor.
@PhastekTrucks3 жыл бұрын
We have installed a few different versions of the intakes on these trucks and we have not ran into any issues. Most intake systems are going to not require anything other then the intake. If the check engine light comes on then it could be a simple code that just needs to be cleared. The system might have seen an error during the installation process.
@Mr.-Sir4 жыл бұрын
Do you have to reflash the ecu after installing a cai on these... I have a '20 sierra denali and have been looking to do some upgrades. I've seen your exhaust videos for them, but still can't decide. 🤔🤔🤔🤔🤔 👍🏾
@PhastekTrucks4 жыл бұрын
No, this intake will not require any tuning. Simply bolt it on and go!
@07BLUESTI4 жыл бұрын
This with the Borla exhaust and youre golden!
@rickyrt25004 жыл бұрын
Do you need to put the lid on the intake box?? I want to hear more intake noise
@PhastekTrucks4 жыл бұрын
Although we do suggest putting the lid in place. You could try it with out the lid and see what it sounds like.
@ivevaclothingco.mariogarci53894 жыл бұрын
Do u recommend a KN 63 over any other Air Intake? Does it void warranty? Will a check engine light appear?!
@PhastekTrucks4 жыл бұрын
Any intake system will do a great job when compared to the factory unit. With that said, the K&N unit is a great kit that works flawlessly and looks better under the hood. Now I would not say that it is our go to but it is definitely at the top of our list. It should not void the warranty but we do always suggest checking with your local servicing dealer. Some dealers are little more lenient with modifications then others. No check engine light at all. Simply bolt the intake in place of the factory one and you are good to go.
@corytackett46824 жыл бұрын
Do you have the Blackhawk install. Or is it about the same
@PhastekTrucks4 жыл бұрын
Installation will be about the same process. The Blackhawk is just an open box design when compared to this version.
@Imsoevil993 жыл бұрын
A flat blade screw driver..... I thought it was called a standard screwdriver?
@PhastekTrucks3 жыл бұрын
That tool has a few different references, we stuck with one of the most common.
@omrod20103 жыл бұрын
Do you recommend to disable the filter life on the dash?
@omrod20103 жыл бұрын
*Filter life system
@PhastekTrucks3 жыл бұрын
Some trucks have shown to not have an issue with keeping the filter life ON, others have shown to not like the intake swap too much and keep giving the notification. So it would all depend on how the truck would act with the intake installed.
@omrod20103 жыл бұрын
@@PhastekTrucks Installed CAI yesterday on my 2020 Silverado 5,7L. Pretty stoked with the results, disabled the filter life anyway as a precaution. Thank you
@Blackocalypse2 жыл бұрын
@@omrod2010 *5.3 L
@j.a.vzlaib11702 жыл бұрын
@@omrod2010 did it makes a better engine sound?
@rafa73633 жыл бұрын
Is it work in a 2.7 turbo?
@PhastekTrucks3 жыл бұрын
No, this system will not fit the 2.7 Turbo. There are some systems available from aFe. Reach out to our sales team and they can fit a system that fits your truck. sales@phastek.com or 855-742-7835