2019 Honda Grom Build: Ep. 10 - Mid Fairing and Rear Seat Cowl Install

Install of the Mid Fairing (V1) and Rear Seat Cowl on my 2019 Honda Grom. It went a lot smoother than expected. Very simple and makes a huge difference! I didn't know until after I saw the before and after shots how badly it needed it! Inexpensive and a must have customization for a Grom, in my opinion..
Be sure to check out ZeedParts and tell them I sent you:
www.ebay.com/s...
/ zeedparts
Follow me on Instagram:
/ steve_mp5

[@javieldiaz6914]

Looks awesome that’s the vision i had in mind and was looking for a video of a install on all that u done great work man

[@Saymyenameyo]

Got be the hardest grom I’ve seen

[@GtechniqNorthAmerica]

Looking good, love that color. You need to protect her with our DIY, 5 year, ceramic coating CSL (Crystal Serum Light) and C2V3 as a topper to act as the sacrificial layer. That will keep her shining like the day you rolled her off the lot.

[@christophermosley7557]

My Buddies at RDE Customs use your Products A1 stuff

[@_DigitalCam]

I will say, I have this exact same setup and the factory orange is just a LITTLE bit lighter than the aftermarket orange. They match very very closely but if you stare at it for a few seconds, you can spot the difference. Not a big deal to most people but I’m a perfectionist and the little things still drive me crazy 😂😭 still really like the kit but the fitment of these aftermarket fairings are a bit questionable but it’s 100% what I expected from aftermarket stuff that’s somewhat cheap like this. Worth it though in my opinion.

[@SmokinSponge]

wow after seeing the bike in its final form iv changed my opinion and am going to buy the v1 i like the how it covers more of the motor and has more color

[@raydelgado7451]

Amazing setup I love everything about your grom

[@aeror115]

But there is no place for my crash cage... I need a second grom😅👍 Cool fairings brother 🤙

[@Reaper1K]

That orange is 🔥!!

[@walshja81]

Looking to do this to my clone. Where in Pa are you? I'm just northwest of Philly.

[@skillshot8894]

Can you lift the seat with the cowl installed I heard you can’t which would be inconvenient for me because that is where I keep my registration

[@FrankiesWorld]

Man thats bad fucking ass! I have an orange grom as well and kept looking to get the same kits you just installed. Now that Ive seen how it actually looks I have to get one!

[@Gstunna-]

Thank you for this video getting these this spring. But I'm assuming makes changing the oil less easy lol

[@aud6262]

Pls tell me all the links from where you bought all the body panels (backfairing and sidefairings and rims ! 🙏🙏🙏 I want to make my grom like this :) thanks!!!

[@larrymarsico4059]

Looks bad ass man🤘

[@user-xu6bu7uy8u]

Will this fit on a 50cc bullet scooter? They are shaped almost identical to the Grom but already has a mid fairing

[@anthonyserrano672]

Looks great bro👍🏼

[@salschiano7225]

Hello Grom looking awesome... Can you share tire size since I’m getting ready to order a Fatty kit :)

[@Botzz28]

what are some good sites for custom mid fairings?

[@SmokinSponge]

Any overheating issues I’m concerned this could impede or restrict air flow considering it’s an air cooled engine

[@Steve_MP5]

Not that I’ve seen

[@SmokinSponge]

@@Steve_MP5 awesome thankyou! youve been super helpful and have very high quality videos im enjoying the channel alot.

[@NhiaVANG91350]

Fucken sick as grom!!!!! 🔥 well done!!!

[@jelle8754]

is the rear seat still usable? Since you made it wider, wont it be unusable? Or at least not as comfortable?

[@Steve_MP5]

Jelle Libeer never put anyone on the back and didn’t plan on it.

[@parkersgarage4216]

What’s up with the safety glasses? I like the orange looks real good.

[@Steve_MP5]

They aren’t safety glasses. They are sun glasses. The company does make special Sefer glasses though.

[@nobles932]

What's the company?

[@parkersgarage4216]

@@nobles932 viper safety sunglasses

[@EffectsExe]

What rims are these ?

[@amzy_g]

Have yo lowered the bike?

[@zakaryhenry1025]

Where’d u get it at

[@hoadinh5800]

Hey bro, just installed this same fairing kit and man I can’t even get down my driveway. Even at an angle, it still drag on the bottom of the kit!! How is it for you?

[@SmokinSponge]

how much do you weigh (no offense) im worried about dragging im 130lb

[@hoadinh5800]

@@SmokinSponge I am 160 lbs

[@Steve_MP5]

@@hoadinh5800 I’m 150 and I don’t scrape on much. Big bump or something yes. It’s low with the 4.5 drop on, but I just try to avoid everything

[@Nathancl22]

The part that isn't smooth is if your running a Chimera Intake and you have the fairing rod stabilizer .....the screws they give you for the fairing kit cross thread super easy with the rod smh.

[@muslimbrotha11]

Great job

[@Sammydread619]

So how was the final fitment on the rear cowl?

[@Steve_MP5]

Great. Fits snug

[@nobles932]

@@Steve_MP5 Glad I found this I was like how in the hell does this mount up I was kind of mad thinking I wasn't going to be able to run it but now I can cuz I found your video you are the man Thank you God bless have a good day

[@j.p.9522]

You should rename it the Steve_Grom channel.

[@SmokinSponge]

would this work on the 2020 model?

[@Steve_MP5]

I don’t see why not. Just see what the description of it says if it will or not. I don’t think there is any difference in the body from 19 to 20

[@SmokinSponge]

@@Steve_MP5 Yeah it does fit looked over everything ordered my full v1 kit and cowl along with the carbon tank and a toce full kit should be a nice addition.

[@alexanderRodriguez-ux6zs]

Will this work on a ssr razscull 125 ?

[@impeepininyourwindow1201]

No

[@atticusgreer.]

Boss.

[@killacabb]

We’re in pa are u

[@Steve_MP5]

killacabb west Chester area

[@killacabb]

Steve_MP5 nice I’m in Allentown wish there were more people around with them

[@ImCaducify]

Dude I ordered this and my shit only came with 2 brackets, not 4. Websites a joke

[@EbolaSquirrel]

hi burnout bobby

[@Twitch412]

No comparison between the before and after . Looks SUPER sick with both front and rear new plastics . Only question I have is can you use the tail if you have a subcage ?

[@kushpaladin]

lol i bet it scrapes on even a small bump!!!! the bottom of that thing is going to turn black from the pavement grinding it to bare plastic!

[@nelsonbrooks]

You’re indoors, lose the shades already, & while you’re at it toss the cap.

[@theotherone3021]

Over night parts from Japan killed me

[@dcchicken75]

Zeed Parts store no longer exists! 😒

[@westcoastkhmer]

just sold my gsxr750 and about to get a grom lol.

[@musclevilleking897]

Great job dude! Came out really good! Wonder if your going to chrome out the parts near the pegs!

[@RustBeltFab_]

How much is your rear lowered? I put a 6” lowering kit on the rear of my 20’ Grom and it drug everywhere.. I had to take it off. 🤬

[@oaulgribble5934]

When you sit down on it does the plastic touch the ground and if it doesn’t how close does it get to the ground

[@oaulgribble5934]

I just got the same fairing v1 gonna put it on my 2019 blue grom

[@Steve_MP5]

It does not touch the ground when sitting. I don’t think it changes a whole lot since it’s the front of the bike. I’m only 150lbs though.

[@sunilsunil7945]

How much it is

[@Tredaytactical]

Get rid of them goofy ass glass

[@kushpaladin]

pit vipers are the shit

[@briansantos2206]

You pay alot in shipping huh? Msx125 accessories .com charges 45 bucks shipping and it could take like 2 months

[@joeveinot5642]

Thats weird it fathers day today 4 years later 6/16/24😅😅❤.

[@Steve_MP5]

🤘🏻🤘🏻🤘🏻

[@austinmuldoon9369]

Damn your Grom looks dope af!! You have inspired me to try and find a green 2020 Grom and put the same kit on it if I can find it.

[@mexicanish555]

Looks way better like that. I now know what I need to do with mine, thanks.

[@moto_tech_braap_itout9852]

Would look better without the lowering and extension kit

[@DaddyPhatSaks]

I hate that you have to drill into the plastics with a screw, cheap design. Over time I dont see that screw biting good after oil changes and what not. I think velcro would be a good option but then you got the screw hole to deal with. Hmm. Also, that back piece just doesnt seem too secure....toward the front, just sits on top of the plastics. I was really digging these plastics but after watching video, Im not sure now. Especially with the rear piece. Also, can you remove the white pieces and still install? That way they wont be getting scratched up. Thanks for the video.

[@Steve_MP5]

Leonard the tail piece is actually really tight. It sort of snaps onto it. It’s not coming off without pulling on it pretty good.

[@juanmeza8637]

Compartiera tu contenido, pero no hablas español

[@bradgarrett7790]

That rear cowling set it on fire keep it!!

[@newyorkers30]

Whats the link I want the same ones

[@DjaLeex7]

Que rim usas en la llanta trasera

[@williampetrey662]

That's 🔥 bro!

[@mberky861]

Looks good

[@aj_who]

So did the rear plastics fit over the stock rear plastics?

[@Steve_MP5]

Yes. Must have forgot to make that clear.

[@CjhEjdl]

Lol @4:50

[@vtecdpn100]

Dang you scrap the street with the added fairing? I’m sure your weight brings the bike closer to the ground.

[@Steve_MP5]

vtecdpn100 lowers it in the back. Not much in the front. But yes I have to avoid pot holes at all costs hahaha

[@vtecdpn100]

Steve_MP5 well that’s scary! Since I’ve found your channel I ended up getting the front and rear lowering kit with the stretch and I’ve been contemplating on getting this. I’m not a heavy guy(145lbs) but I don’t want it to catch on dips etc.....

[@Steve_MP5]

vtecdpn100 I don’t recall ever scraping on dips in the road. I’d hit going into pot holes and transitions in elevation sometimes. If I can avoid I do. If I can’t I gun it and pull up on the front end a little and hope for the best haha. There is no damage though. Doesn’t happen as much as you would think. I’m about the same weight at 150ish. You’ll be good. Get it if you want it. Drastically changes the look of the bike.

[@vtecdpn100]

Already ordered them 👍🏼