Y'all boys don't play around. Kick ass truck man!!!
@drewjackson30063 жыл бұрын
I can not wait to see this truck in person...
@BazonBlades3 жыл бұрын
The last build I did as a kid was a column shift TH350. In fact, I've owned multiple column shift cars. The only way I will go back to the column is with paddle shifters. I gotta throw you some respect brother.
@1STGeneral3 жыл бұрын
Praying for you Justin my wife has stage 4 cancer going in Monday for her second round of chemo this year hopefully it goes better than the last one 2 ambulance rides in a week too weak to walk it's such a helpless feeling unable to help the one you love
@35RSkyline3 жыл бұрын
Dude I saw OBS and clicked. My 94 is the same color and funny enough I had the idea to some day put a 427 in mine but I like the idea of ab lt4. lol. This is amazing! I'll be following this build for sure!
@Autofaze3 жыл бұрын
Can't wait to see some track rips 🤘
@leegyonmelts82203 жыл бұрын
You should do a video about Nemo like you did the truck. Explaining how much everything costed and stuff I think that could be pretty informational for some people out there
@StangkilrProductions3 жыл бұрын
I can!
@qunicetoole74973 жыл бұрын
That's going to be 1 badass obs Chevy truck when you're done with it, I got a question? will you have the short obs style AC compressor on this zL1 build.✌
@StangkilrProductions3 жыл бұрын
The Nemo project was a tough one but its finally finished! Dyno next
@jesseinachevy26293 жыл бұрын
This channel is underrated! Love the content 👌
@StangkilrProductions3 жыл бұрын
Thank you!
@brandonpanozzo863 жыл бұрын
can't wait to see her rip
@Josh_D033 жыл бұрын
Dyno forsure
@brianjacobs12413 жыл бұрын
Absolutely beautiful car man she is very pretty that’s a car you never sell
@Josh_D033 жыл бұрын
The truck build is sweet. Would love to see an s10 drag or track style truck if you guys are into it. Hoping to ls swap my s10 this summer and would love to see how the pros would do it
@StangkilrProductions3 жыл бұрын
I thought about doing a more drag race oriented truck build. Big single turbo and stuff.
@michaelhenderson50983 жыл бұрын
The truck looks great. What year model is it?
@StangkilrProductions3 жыл бұрын
1993 Silverado
@fast97z243 жыл бұрын
Still in awe.
@MickelsonRacingChannel3 жыл бұрын
If the silicone was sucking shut, would that indicate a restriction due to pipe size?
@StangkilrProductions3 жыл бұрын
It was on the outlet of the intercooler into the throttle body on boost tip in. That just means the engine was needing more air that it was getting. It’s perfect now
@gman24783 жыл бұрын
Just asking, but why the Th400 & not the Proglide? It because you do street driving & 3spds better? Trying to to decide myself.
@StangkilrProductions3 жыл бұрын
Heavy car the TH400 is better
@3pedalracing1383 жыл бұрын
Come on guys let’s get this channel to 100k !! They build sema quality cars and trucks
@StangkilrProductions3 жыл бұрын
I really appreciate that! Thank you
@Cheap03 жыл бұрын
Yes they do very nice builds love the trucks myself the wheels cost more than my nitrous ls swapped 94 ss s10 lol not hatin if I could I would I'm sure they work hard for wat they got let's see a s10 build nxt a 2nd gen be cool to see your take on a s10 the direction you would go with it
@Josh_D033 жыл бұрын
Would love to see an s10 build. Thats my project atm as well
@brandona46183 жыл бұрын
Ever been to SEMA? Quality on most projects are incomplete and welds are just there for decorations. I skipped the last 5 years of SEMA. Just not a fun event anymore.
@tma41373 жыл бұрын
The level of quality of this build is insane, it literally can't get any better than this.
@StangkilrProductions3 жыл бұрын
Thank you! We take pride in what we do. I have the best techs around!
@tma41373 жыл бұрын
@@StangkilrProductions yeah I've known Tim for a long time. Back around 2004 I worked with Joe Good and I met Tim thru joe. Good guy. It's awesome to see him working there, doing what he loves!
@RaceGasSmellsGood3 жыл бұрын
These ZL1s are a lot of car for the money on the used market! 💪🚀🔥
@StangkilrProductions3 жыл бұрын
Best bang for the buck performance car right now IMO
@xtbone022xOpTic3 жыл бұрын
Okay, what BOV are you running because I love the sound lmao
@StangkilrProductions3 жыл бұрын
Turbosmart
@xtbone022xOpTic3 жыл бұрын
@@StangkilrProductions that's what I'm currently running. Their 50mm one. Definitely doesn't sound like that lol I'll have to look into it
@larrylucas57313 жыл бұрын
This truck build has to be my favorite so far.
@D1XGXP3 жыл бұрын
Not notching the frame for the ac compressor anymore?
@StangkilrProductions3 жыл бұрын
Nope, I’ll go a different route on the drive kit.
@expectnolove99783 жыл бұрын
Top notch work!!!
@RustyWrenches3 жыл бұрын
It's like watching my build in fast forward! Mine was a painful year and a half, hour at a time build. You guys are making great progress. Looking forward to seeing the completed truck.
@StangkilrProductions3 жыл бұрын
I want to see yours
@RustyWrenches3 жыл бұрын
@@StangkilrProductions I need to come out to Justin’s to have the trans looked at soon. I’ll swing by the shop
@ginopic7223 жыл бұрын
you have a cage in that? i looked at all the build vids and could not tell
@StangkilrProductions3 жыл бұрын
Yeah it’s got a cage
@98wytebird3 жыл бұрын
windage tray I think
@adilalrwahi47293 жыл бұрын
super exited 🤩🤩
@imdaddy51803 жыл бұрын
Amazing build! One of the first TT ZL1s I’ve seen
@JohnDoe-gz8dw3 жыл бұрын
This is not to hurt, but you look like the bus driver from grownups, in my mid 40's and that truck has me drooling, wanted one back in the day and have never stopped wanting one
@russclewley69453 жыл бұрын
Great builds! Keep it up!
@CTemple823 жыл бұрын
One of Billet Specialties D-Shaped collection steering wheels would look really good on the truck. Something to match the quality of the rest of the build, instead of the typical Forever sharp steering wheels. Or even a factory wheel to match the rest of the interior would look better.
@StangkilrProductions3 жыл бұрын
The Billet Specialties wheel is the one. Something on my list
@minitrucker043 жыл бұрын
Awesome update on both rides
@1lepandaboyy766 Жыл бұрын
The question is how much a swap cost of this from manual to th400
@soccerprodsl22573 жыл бұрын
Fastest zl1 out there 😅 keep it up man. I’m a camaro fan an I just love the way u built ur car !
@marissacepeda89793 жыл бұрын
Badass obs content can’t wait to see it down the drag strip!!
@robes8123 жыл бұрын
For real, your rear driveshaft measurement needs to be taken from the flat on your yoke. That is the true center of your U joint. Hope I'm not to late. Best of luck!!! I love this build...so nice.
@StangkilrProductions3 жыл бұрын
It fits perfect
@RaceGasSmellsGood3 жыл бұрын
Nemo!!! Nice to see this thing come together!!
@mtpruden3 жыл бұрын
That rear end is 🥩
@EvomaniaX3 жыл бұрын
Are you going to be adding paddle shifters ? That would be cool too
@justinayoub83743 жыл бұрын
What dash is that
@jaxjax53223 жыл бұрын
Justin budy with that inovated crossmember does it clears 3” muffler in each side? I just order one
@StangkilrProductions3 жыл бұрын
It will no problem
@tonybrown67753 жыл бұрын
Love to build an Obs Chevy truck like that one of these days
@floridanick3 жыл бұрын
Great build 🇺🇸👍
@fishpony12113 жыл бұрын
Cant wait to hear this thing fire up!
@RSChris6663 жыл бұрын
Does that steering shaft not collapse down? If so it should be pulled out some that way it can collapse in the event of an accident.
@StangkilrProductions3 жыл бұрын
It does
@Crispy13203 жыл бұрын
Figured watch the whole video before I commented just had a quick question how are you planning on running your exhaust on the truck
@StangkilrProductions3 жыл бұрын
Ypipe off the headers into a 4” exhaust/muffler then ran all the way out back. No tips hidden pipes
@johnmoniz27153 жыл бұрын
Never been a OBS fan till I saw this build!!! Well done bro!!!
@Peach_Of_A_Hand3 жыл бұрын
This is my dream build maybe one day ill be able to afford it!
@jrgalloway863 жыл бұрын
Yes!!!!
@Gym-bars-cars3 жыл бұрын
What was the name of the part for colum linkage called ?
@geraldbrazell58533 жыл бұрын
loved the intro!
@wvcountryboy21653 жыл бұрын
It ends on my birthday
@thedees693 жыл бұрын
Hell yeah brother
@409rugbyplaya3 жыл бұрын
Using that O2 bung? May have some clearance issues with the trans cooler block of ya are.
@StangkilrProductions3 жыл бұрын
It clears. Sensors arenin
@409rugbyplaya3 жыл бұрын
@@StangkilrProductions great to hear!! Awesome build guys!
@zebulonstampfler91173 жыл бұрын
Awesome Justin! Thank you! Hoping to make it to a street car takeover soon!
@cjcoleman73723 жыл бұрын
Glad seeing Nemo up and running. Thoughts and prayers go out for losing his wife. I couldn't even imagine.
@rockkhound9433 жыл бұрын
Thoughts and prayers to Justin adapt and overcome brother. ....dude nemo is such an amazing build not sure which one I like more Nemo or Teal ..tough decision lol...either way there top notch builds guys very good job and thanks for sharing
@daria_morgandorffer57683 жыл бұрын
Who makes those front wheels? I’d love to try and score a black set for my 2019 Redeye Widebody.
@StangkilrProductions3 жыл бұрын
Weld S72’s
@rickscott62393 жыл бұрын
Both builds are fantastic, one down one to go. Nemo sounds great and I can't wait for the truck to fire up then it'll be time to roast some tires ! Yee haw ! 😎👍💯
@krishiatt72033 жыл бұрын
The car sounds healthy man, good luck on the dyno and God Speed to you're tuner.
@CascadingDream3 жыл бұрын
Did you give up on the AC?
@StangkilrProductions3 жыл бұрын
For now. I think I’ll do a different drive kit that’s about to come out.
@BetoAntrax1003 жыл бұрын
Can we get some zr1 content please.
@StangkilrProductions3 жыл бұрын
It’s coming, I promise.
@Phillyracingsource3 жыл бұрын
Love the truck brotha 💪🏻 can’t wait to see it done and I love the welds that are on it
@henryg6833 жыл бұрын
I have seen once where the little pieces of rubber hoses blow they had to hard pipe it with clamps holding pipes together hopefully you don’t have the same problem with all the work you have done to NEMO it did happen on the dyno!!!!
@TrixsM53 жыл бұрын
F@ck cancer 😥
@D1XGXP3 жыл бұрын
Question, how are you going to roll race with it if all you have is drive? Isn’t it bad to let the trans downshift under wot? I know the GM 6l trans do not like being wot downshifted. Are you going to adapting a way to be able to go into manual mode?
@StangkilrProductions3 жыл бұрын
It doesn’t hurt it. I will end up putting some type of way to paddle shift it though.